Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "I2C has some pretty standard driver bugfixes and one minor cleanup"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: meson: Use complete() instead of complete_all()
  i2c: brcmstb: Use complete() instead of complete_all()
  i2c: bcm-kona: Use complete() instead of complete_all()
  i2c: bcm-iproc: Use complete() instead of complete_all()
  i2c: at91: fix support of the "alternative command" feature
  i2c: ocores: add missed clk_disable_unprepare() on failure paths
  i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
  i2c: mux: demux-pinctrl: properly roll back when adding adapter fails

drivers/i2c/busses/i2c-at91.c

@@ -38,6 +38,7 @@
 #define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
 #define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
 #define AUTOSUSPEND_TIMEOUT		2000
+#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE	256
 
 /* AT91 TWI register definitions */
 #define	AT91_TWI_CR		0x0000	/* Control Register */
@@ -141,6 +142,7 @@ struct at91_twi_dev {
 	unsigned twi_cwgr_reg;
 	struct at91_twi_pdata *pdata;
 	bool use_dma;
+	bool use_alt_cmd;
 	bool recv_len_abort;
 	u32 fifo_size;
 	struct at91_twi_dma dma;
@@ -269,7 +271,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
 
 	/* send stop when last byte has been written */
 	if (--dev->buf_len == 0)
-		if (!dev->pdata->has_alt_cmd)
+		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
 	dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
@@ -292,7 +294,7 @@ static void at91_twi_write_data_dma_callback(void *data)
 	 * we just have to enable TXCOMP one.
 	 */
 	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
-	if (!dev->pdata->has_alt_cmd)
+	if (!dev->use_alt_cmd)
 		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 }
 
@@ -410,7 +412,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 	}
 
 	/* send stop if second but last byte has been read */
-	if (!dev->pdata->has_alt_cmd && dev->buf_len == 1)
+	if (!dev->use_alt_cmd && dev->buf_len == 1)
 		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
 	dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
@@ -426,7 +428,7 @@ static void at91_twi_read_data_dma_callback(void *data)
 	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
 			 dev->buf_len, DMA_FROM_DEVICE);
 
-	if (!dev->pdata->has_alt_cmd) {
+	if (!dev->use_alt_cmd) {
 		/* The last two bytes have to be read without using dma */
 		dev->buf += dev->buf_len - 2;
 		dev->buf_len = 2;
@@ -443,7 +445,7 @@ static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
 	struct dma_chan *chan_rx = dma->chan_rx;
 	size_t buf_len;
 
-	buf_len = (dev->pdata->has_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
+	buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
 	dma->direction = DMA_FROM_DEVICE;
 
 	/* Keep in mind that we won't use dma to read the last two bytes */
@@ -651,7 +653,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		unsigned start_flags = AT91_TWI_START;
 
 		/* if only one byte is to be read, immediately stop transfer */
-		if (!has_alt_cmd && dev->buf_len <= 1 &&
+		if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
 		    !(dev->msg->flags & I2C_M_RECV_LEN))
 			start_flags |= AT91_TWI_STOP;
 		at91_twi_write(dev, AT91_TWI_CR, start_flags);
@@ -745,7 +747,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	int ret;
 	unsigned int_addr_flag = 0;
 	struct i2c_msg *m_start = msg;
-	bool is_read, use_alt_cmd = false;
+	bool is_read;
 
 	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
 
@@ -768,14 +770,16 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 		at91_twi_write(dev, AT91_TWI_IADR, internal_address);
 	}
 
+	dev->use_alt_cmd = false;
 	is_read = (m_start->flags & I2C_M_RD);
 	if (dev->pdata->has_alt_cmd) {
-		if (m_start->len > 0) {
+		if (m_start->len > 0 &&
+		    m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
 			at91_twi_write(dev, AT91_TWI_ACR,
 				       AT91_TWI_ACR_DATAL(m_start->len) |
 				       ((is_read) ? AT91_TWI_ACR_DIR : 0));
-			use_alt_cmd = true;
+			dev->use_alt_cmd = true;
 		} else {
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
 		}
@@ -784,7 +788,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	at91_twi_write(dev, AT91_TWI_MMR,
 		       (m_start->addr << 16) |
 		       int_addr_flag |
-		       ((!use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
+		       ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
 
 	dev->buf_len = m_start->len;
 	dev->buf = m_start->buf;

drivers/i2c/busses/i2c-bcm-iproc.c

@@ -158,7 +158,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
 
 	if (status & BIT(IS_M_START_BUSY_SHIFT)) {
 		iproc_i2c->xfer_is_done = 1;
-		complete_all(&iproc_i2c->done);
+		complete(&iproc_i2c->done);
 	}
 
 	writel(status, iproc_i2c->base + IS_OFFSET);

drivers/i2c/busses/i2c-bcm-kona.c

@@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
 		       dev->base + TXFCR_OFFSET);
 
 	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
-	complete_all(&dev->done);
+	complete(&dev->done);
 
 	return IRQ_HANDLED;
 }

drivers/i2c/busses/i2c-brcmstb.c

@@ -228,7 +228,7 @@ static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
 		return IRQ_NONE;
 
 	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
-	complete_all(&dev->done);
+	complete(&dev->done);
 
 	dev_dbg(dev->device, "isr handled");
 	return IRQ_HANDLED;

drivers/i2c/busses/i2c-cros-ec-tunnel.c

@@ -215,7 +215,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
 	msg->outsize = request_len;
 	msg->insize = response_len;
 
-	result = cros_ec_cmd_xfer(bus->ec, msg);
+	result = cros_ec_cmd_xfer_status(bus->ec, msg);
 	if (result < 0) {
 		dev_err(dev, "Error transferring EC i2c message %d\n", result);
 		goto exit;

drivers/i2c/busses/i2c-meson.c

@@ -211,7 +211,7 @@ static void meson_i2c_stop(struct meson_i2c *i2c)
 		meson_i2c_add_token(i2c, TOKEN_STOP);
 	} else {
 		i2c->state = STATE_IDLE;
-		complete_all(&i2c->done);
+		complete(&i2c->done);
 	}
 }
 
@@ -238,7 +238,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
 		dev_dbg(i2c->dev, "error bit set\n");
 		i2c->error = -ENXIO;
 		i2c->state = STATE_IDLE;
-		complete_all(&i2c->done);
+		complete(&i2c->done);
 		goto out;
 	}
 
@@ -269,7 +269,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
 		break;
 	case STATE_STOP:
 		i2c->state = STATE_IDLE;
-		complete_all(&i2c->done);
+		complete(&i2c->done);
 		break;
 	case STATE_IDLE:
 		break;

drivers/i2c/busses/i2c-ocores.c

@@ -379,6 +379,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
 			if (!clock_frequency_present) {
 				dev_err(&pdev->dev,
 					"Missing required parameter 'opencores,ip-clock-frequency'\n");
+				clk_disable_unprepare(i2c->clk);
 				return -ENODEV;
 			}
 			i2c->ip_clock_khz = clock_frequency / 1000;
@@ -467,20 +468,21 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 		default:
 			dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
 				i2c->reg_io_width);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto err_clk;
 		}
 	}
 
 	ret = ocores_init(&pdev->dev, i2c);
 	if (ret)
-		return ret;
+		goto err_clk;
 
 	init_waitqueue_head(&i2c->wait);
 	ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
 			       pdev->name, i2c);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-		return ret;
+		goto err_clk;
 	}
 
 	/* hook up driver to tree */
@@ -494,7 +496,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add adapter\n");
-		return ret;
+		goto err_clk;
 	}
 
 	/* add in known devices to the bus */
@@ -504,6 +506,10 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	}
 
 	return 0;
+
+err_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
 }
 
 static int ocores_i2c_remove(struct platform_device *pdev)

drivers/i2c/muxes/i2c-demux-pinctrl.c

@@ -68,7 +68,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
 	adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
 	if (!adap) {
 		ret = -ENODEV;
-		goto err;
+		goto err_with_revert;
 	}
 
 	p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name);
@@ -103,6 +103,8 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
 
  err_with_put:
 	i2c_put_adapter(adap);
+ err_with_revert:
+	of_changeset_revert(&priv->chan[new_chan].chgset);
  err:
 	dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret);
 	return ret;