crypto: caam/qi2 - add DPAA2-CAAM driver

Add CAAM driver that works using the DPSECI backend, i.e. manages
DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus.

Data transfers (crypto requests) are sent/received to/from CAAM crypto
engine via Queue Interface (v2), this being similar to existing caam/qi.
OTOH, configuration/setup (obtaining virtual queue IDs, authorization
etc.) is done by sending commands to the MC f/w.

Note that the CAAM accelerator included in DPAA2 platforms still has
Job Rings. However, the driver being added does not handle access
via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM
(a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi
backends - which rely on platform bus support (ctrl.c).

Support for the following aead and authenc algorithms is also added
in this patch:
-aead:
gcm(aes)
rfc4106(gcm(aes))
rfc4543(gcm(aes))
-authenc:
authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))
echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})))
authenc(hmac({md5,sha*}),rfc3686(ctr(aes))
seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes)))

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/
 obj-$(CONFIG_CRYPTO_DEV_CPT) += cavium/cpt/
 obj-$(CONFIG_CRYPTO_DEV_NITROX) += cavium/nitrox/
 obj-$(CONFIG_CRYPTO_DEV_EXYNOS_RNG) += exynos-rng.o
-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam/
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += caam/
 obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
 obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
 obj-$(CONFIG_CRYPTO_DEV_IMGTEC_HASH) += img-hash.o

drivers/crypto/caam/Kconfig

@@ -1,7 +1,11 @@
+config CRYPTO_DEV_FSL_CAAM_COMMON
+	tristate
+
 config CRYPTO_DEV_FSL_CAAM
-	tristate "Freescale CAAM-Multicore driver backend"
+	tristate "Freescale CAAM-Multicore platform driver backend"
 	depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE
 	select SOC_BUS
+	select CRYPTO_DEV_FSL_CAAM_COMMON
 	help
 	  Enables the driver module for Freescale's Cryptographic Accelerator
 	  and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
@@ -12,9 +16,16 @@ config CRYPTO_DEV_FSL_CAAM
 	  To compile this driver as a module, choose M here: the module
 	  will be called caam.
 
+if CRYPTO_DEV_FSL_CAAM
+
+config CRYPTO_DEV_FSL_CAAM_DEBUG
+	bool "Enable debug output in CAAM driver"
+	help
+	  Selecting this will enable printing of various debug
+	  information in the CAAM driver.
+
 config CRYPTO_DEV_FSL_CAAM_JR
 	tristate "Freescale CAAM Job Ring driver backend"
-	depends on CRYPTO_DEV_FSL_CAAM
 	default y
 	help
 	  Enables the driver module for Job Rings which are part of
@@ -25,9 +36,10 @@ config CRYPTO_DEV_FSL_CAAM_JR
 	  To compile this driver as a module, choose M here: the module
 	  will be called caam_jr.
 
+if CRYPTO_DEV_FSL_CAAM_JR
+
 config CRYPTO_DEV_FSL_CAAM_RINGSIZE
 	int "Job Ring size"
-	depends on CRYPTO_DEV_FSL_CAAM_JR
 	range 2 9
 	default "9"
 	help
@@ -45,7 +57,6 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE
 
 config CRYPTO_DEV_FSL_CAAM_INTC
 	bool "Job Ring interrupt coalescing"
-	depends on CRYPTO_DEV_FSL_CAAM_JR
 	help
 	  Enable the Job Ring's interrupt coalescing feature.
 
@@ -75,7 +86,6 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
 
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
 	tristate "Register algorithm implementations with the Crypto API"
-	depends on CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_AEAD
 	select CRYPTO_AUTHENC
@@ -90,7 +100,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
 
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
 	tristate "Queue Interface as Crypto API backend"
-	depends on CRYPTO_DEV_FSL_CAAM_JR && FSL_DPAA && NET
+	depends on FSL_DPAA && NET
 	default y
 	select CRYPTO_AUTHENC
 	select CRYPTO_BLKCIPHER
@@ -107,7 +117,6 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
 
 config CRYPTO_DEV_FSL_CAAM_AHASH_API
 	tristate "Register hash algorithm implementations with Crypto API"
-	depends on CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_HASH
 	help
@@ -119,7 +128,6 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API
 
 config CRYPTO_DEV_FSL_CAAM_PKC_API
         tristate "Register public key cryptography implementations with Crypto API"
-        depends on CRYPTO_DEV_FSL_CAAM_JR
         default y
         select CRYPTO_RSA
         help
@@ -131,7 +139,6 @@ config CRYPTO_DEV_FSL_CAAM_PKC_API
 
 config CRYPTO_DEV_FSL_CAAM_RNG_API
 	tristate "Register caam device for hwrng API"
-	depends on CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_RNG
 	select HW_RANDOM
@@ -142,13 +149,25 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
 	  To compile this as a module, choose M here: the module
 	  will be called caamrng.
 
-config CRYPTO_DEV_FSL_CAAM_DEBUG
-	bool "Enable debug output in CAAM driver"
-	depends on CRYPTO_DEV_FSL_CAAM
+endif # CRYPTO_DEV_FSL_CAAM_JR
+
+endif # CRYPTO_DEV_FSL_CAAM
+
+config CRYPTO_DEV_FSL_DPAA2_CAAM
+	tristate "QorIQ DPAA2 CAAM (DPSECI) driver"
+	depends on FSL_MC_DPIO
+	select CRYPTO_DEV_FSL_CAAM_COMMON
+	select CRYPTO_AUTHENC
+	select CRYPTO_AEAD
 	help
-	  Selecting this will enable printing of various debug
-	  information in the CAAM driver.
+	  CAAM driver for QorIQ Data Path Acceleration Architecture 2.
+	  It handles DPSECI DPAA2 objects that sit on the Management Complex
+	  (MC) fsl-mc bus.
+
+	  To compile this as a module, choose M here: the module
+	  will be called dpaa2_caam.
 
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
 	def_tristate (CRYPTO_DEV_FSL_CAAM_CRYPTO_API || \
-		      CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI)
+		      CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI || \
+		      CRYPTO_DEV_FSL_DPAA2_CAAM)

drivers/crypto/caam/Makefile

@@ -6,6 +6,9 @@ ifeq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG), y)
 	ccflags-y := -DDEBUG
 endif
 
+ccflags-y += -DVERSION=\"\"
+
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += error.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
@@ -16,9 +19,13 @@ obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caam_pkc.o
 
 caam-objs := ctrl.o
-caam_jr-objs := jr.o key_gen.o error.o
+caam_jr-objs := jr.o key_gen.o
 caam_pkc-y := caampkc.o pkc_desc.o
 ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
 	ccflags-y += -DCONFIG_CAAM_QI
 	caam-objs += qi.o
 endif
+
+obj-$(CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM) += dpaa2_caam.o
+
+dpaa2_caam-y    := caamalg_qi2.o dpseci.o