PCI: iproc: Add arm64 support

Add arm64 support to the iProc PCIe driver.

Note that on arm32, bus->sysdata points to the arm32-specific pci_sys_data
struct, and pci_sys_data.private_data contains the iproc_pcie pointer.
For arm64, there's nothing corresponding to pci_sys_data, so we keep the
iproc_pcie pointer directly in bus->sysdata.

In addition, arm64 does IRQ mapping in pcibios_add_device(), so it doesn't
need pci_fixup_irqs() as arm32 does.

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>

drivers/pci/host/pcie-iproc.c

@@ -58,9 +58,17 @@
 #define SYS_RC_INTX_EN               0x330
 #define SYS_RC_INTX_MASK             0xf
 
-static inline struct iproc_pcie *sys_to_pcie(struct pci_sys_data *sys)
+static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
 {
-	return sys->private_data;
+	struct iproc_pcie *pcie;
+#ifdef CONFIG_ARM
+	struct pci_sys_data *sys = bus->sysdata;
+
+	pcie = sys->private_data;
+#else
+	pcie = bus->sysdata;
+#endif
+	return pcie;
 }
 
 /**
@@ -71,8 +79,7 @@ static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
 					    unsigned int devfn,
 					    int where)
 {
-	struct pci_sys_data *sys = bus->sysdata;
-	struct iproc_pcie *pcie = sys_to_pcie(sys);
+	struct iproc_pcie *pcie = iproc_data(bus);
 	unsigned slot = PCI_SLOT(devfn);
 	unsigned fn = PCI_FUNC(devfn);
 	unsigned busno = bus->number;
@@ -186,6 +193,7 @@ static void iproc_pcie_enable(struct iproc_pcie *pcie)
 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	int ret;
+	void *sysdata;
 	struct pci_bus *bus;
 
 	if (!pcie || !pcie->dev || !pcie->base)
@@ -205,10 +213,14 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 
 	iproc_pcie_reset(pcie);
 
+#ifdef CONFIG_ARM
 	pcie->sysdata.private_data = pcie;
+	sysdata = &pcie->sysdata;
+#else
+	sysdata = pcie;
+#endif
 
-	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
-				  &pcie->sysdata, res);
+	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res);
 	if (!bus) {
 		dev_err(pcie->dev, "unable to create PCI root bus\n");
 		ret = -ENOMEM;
@@ -226,7 +238,9 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
+#ifdef CONFIG_ARM
 	pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
+#endif
 	pci_bus_add_devices(bus);
 
 	return 0;

drivers/pci/host/pcie-iproc.h

@@ -21,15 +21,17 @@
  * @dev: pointer to device data structure
  * @base: PCIe host controller I/O register base
  * @resources: linked list of all PCI resources
- * @sysdata: Per PCI controller data
+ * @sysdata: Per PCI controller data (ARM-specific)
  * @root_bus: pointer to root bus
  * @phy: optional PHY device that controls the Serdes
  * @irqs: interrupt IDs
  */
 struct iproc_pcie {
 	struct device *dev;
 	void __iomem *base;
+#ifdef CONFIG_ARM
 	struct pci_sys_data sysdata;
+#endif
 	struct pci_bus *root_bus;
 	struct phy *phy;
 	int irqs[IPROC_PCIE_MAX_NUM_IRQS];