toshiba: Move the Toshiba drivers

Move the Toshiba ethernet drivers into drivers/net/ethernet/toshiba
and make the necessary Kconfig and Makefile changes.

CC: Geoff Levand <geoff@infradead.org>
CC: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAINTAINERS

@@ -5127,7 +5127,7 @@ M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@lists.ozlabs.org
 S:	Maintained
-F:	drivers/net/ps3_gelic_net.*
+F:	drivers/net/ethernet/toshiba/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
@@ -6084,7 +6084,7 @@ M:	Jens Osterkamp <jens@de.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/spider_net.txt
-F:	drivers/net/spider_net*
+F:	drivers/net/ethernet/toshiba/spider_net*
 
 SPU FILE SYSTEM
 M:	Jeremy Kerr <jk@ozlabs.org>

drivers/net/Kconfig

@@ -478,11 +478,6 @@ config FORCEDETH
 	  To compile this driver as a module, choose M here. The module
 	  will be called forcedeth.
 
-config TC35815
-	tristate "TOSHIBA TC35815 Ethernet support"
-	depends on NET_PCI && PCI && MIPS
-	select PHYLIB
-
 config FEALNX
 	tristate "Myson MTD-8xx PCI Ethernet support"
 	depends on NET_PCI && PCI
@@ -658,15 +653,6 @@ config SIS190
 	  To compile this driver as a module, choose M here: the module
 	  will be called sis190.  This is recommended.
 
-config SPIDER_NET
-	tristate "Spider Gigabit Ethernet driver"
-	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
-	select FW_LOADER
-	select SUNGEM_PHY
-	help
-	  This driver supports the Gigabit Ethernet chips present on the
-	  Cell Processor-Based Blades from IBM.
-
 config TSI108_ETH
 	tristate "Tundra TSI108 gigabit Ethernet support"
 	depends on TSI108_BRIDGE
@@ -675,29 +661,6 @@ config TSI108_ETH
 	  To compile this driver as a module, choose M here: the module
 	  will be called tsi108_eth.
 
-config GELIC_NET
-	tristate "PS3 Gigabit Ethernet driver"
-	depends on PPC_PS3
-	select PS3_SYS_MANAGER
-	help
-	  This driver supports the network device on the PS3 game
-	  console.  This driver has built-in support for Ethernet.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ps3_gelic.
-
-config GELIC_WIRELESS
-	bool "PS3 Wireless support"
-	depends on WLAN
-	depends on GELIC_NET
-	select WIRELESS_EXT
-	help
-	  This option adds the support for the wireless feature of PS3.
-	  If you have the wireless-less model of PS3 or have no plan to
-	  use wireless feature, disabling this option saves memory.  As
-	  the driver automatically distinguishes the models, you can
-	  safely enable this option even if you have a wireless-less model.
-
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
 	depends on PPC || MICROBLAZE

drivers/net/Makefile

@@ -29,12 +29,6 @@ obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_FEALNX) += fealnx.o
-spidernet-y += spider_net.o spider_net_ethtool.o
-obj-$(CONFIG_SPIDER_NET) += spidernet.o
-obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
-ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
-obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o

drivers/net/ethernet/Kconfig

@@ -48,6 +48,7 @@ source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
 
 endif # ETHERNET

drivers/net/ethernet/Makefile

@@ -39,4 +39,5 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/

drivers/net/ethernet/toshiba/Kconfig

@@ -0,0 +1,56 @@
+#
+# Toshiba network device configuration
+#
+
+config NET_VENDOR_TOSHIBA
+	bool "Toshiba devices"
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Toshiba cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_TOSHIBA
+
+config GELIC_NET
+	tristate "PS3 Gigabit Ethernet driver"
+	depends on PPC_PS3
+	select PS3_SYS_MANAGER
+	---help---
+	  This driver supports the network device on the PS3 game
+	  console.  This driver has built-in support for Ethernet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps3_gelic.
+
+config GELIC_WIRELESS
+	bool "PS3 Wireless support"
+	depends on GELIC_NET && WLAN
+	select WIRELESS_EXT
+	---help---
+	  This option adds the support for the wireless feature of PS3.
+	  If you have the wireless-less model of PS3 or have no plan to
+	  use wireless feature, disabling this option saves memory.  As
+	  the driver automatically distinguishes the models, you can
+	  safely enable this option even if you have a wireless-less model.
+
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
+	select FW_LOADER
+	select SUNGEM_PHY
+	---help---
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
+config TC35815
+	tristate "TOSHIBA TC35815 Ethernet support"
+	depends on PCI && MIPS
+	select PHYLIB
+
+endif # NET_VENDOR_TOSHIBA

drivers/net/ethernet/toshiba/Makefile

@@ -0,0 +1,10 @@
+#
+# Makefile for the Toshiba network device drivers.
+#
+
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
+spidernet-y += spider_net.o spider_net_ethtool.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
+obj-$(CONFIG_TC35815) += tc35815.o