Merge tag 'drm-intel-fixes-2013-09-19' of git://people.freedesktop.or…

…g/~danvet/drm-intel into drm-fixes

Some more dealock fixes around pageflips and gpu hangs, fixes for hsw hangs
when doing modesets/dpms. And a few minor things to rectify issues with our
modeset state tracking which the checker spotted.

* tag 'drm-intel-fixes-2013-09-19' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Don't enable the cursor on a disable pipe
  drm/i915: do not update cursor in crtc mode set
  drm/i915: kill set_need_resched
  drm/i915/dvo: set crtc timings again for panel fixed modes
  drm/i915/sdvo: Robustify the dtd<->drm_mode conversions
  drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion
  drm/i915: Use proper print format for debug prints
  drm/i915: fix wait_for_pending_flips vs gpu hang deadlock
  drm/i915: Track pfit enable state separately from size

drivers/gpu/drm/i915/i915_gem.c

@@ -1390,14 +1390,11 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		if (i915_terminally_wedged(&dev_priv->gpu_error))
 			return VM_FAULT_SIGBUS;
 	case -EAGAIN:
-		/* Give the error handler a chance to run and move the
-		 * objects off the GPU active list. Next time we service the
-		 * fault, we should be able to transition the page into the
-		 * GTT without touching the GPU (and so avoid further
-		 * EIO/EGAIN). If the GPU is wedged, then there is no issue
-		 * with coherency, just lost writes.
+		/*
+		 * EAGAIN means the gpu is hung and we'll wait for the error
+		 * handler to reset everything when re-faulting in
+		 * i915_mutex_lock_interruptible.
 		 */
-		set_need_resched();
 	case 0:
 	case -ERESTARTSYS:
 	case -EINTR:

drivers/gpu/drm/i915/i915_irq.c

@@ -1469,6 +1469,34 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 	return ret;
 }
 
+static void i915_error_wake_up(struct drm_i915_private *dev_priv,
+			       bool reset_completed)
+{
+	struct intel_ring_buffer *ring;
+	int i;
+
+	/*
+	 * Notify all waiters for GPU completion events that reset state has
+	 * been changed, and that they need to restart their wait after
+	 * checking for potential errors (and bail out to drop locks if there is
+	 * a gpu reset pending so that i915_error_work_func can acquire them).
+	 */
+
+	/* Wake up __wait_seqno, potentially holding dev->struct_mutex. */
+	for_each_ring(ring, dev_priv, i)
+		wake_up_all(&ring->irq_queue);
+
+	/* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */
+	wake_up_all(&dev_priv->pending_flip_queue);
+
+	/*
+	 * Signal tasks blocked in i915_gem_wait_for_error that the pending
+	 * reset state is cleared.
+	 */
+	if (reset_completed)
+		wake_up_all(&dev_priv->gpu_error.reset_queue);
+}
+
 /**
  * i915_error_work_func - do process context error handling work
  * @work: work struct
@@ -1483,11 +1511,10 @@ static void i915_error_work_func(struct work_struct *work)
 	drm_i915_private_t *dev_priv = container_of(error, drm_i915_private_t,
 						    gpu_error);
 	struct drm_device *dev = dev_priv->dev;
-	struct intel_ring_buffer *ring;
 	char *error_event[] = { I915_ERROR_UEVENT "=1", NULL };
 	char *reset_event[] = { I915_RESET_UEVENT "=1", NULL };
 	char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
-	int i, ret;
+	int ret;
 
 	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
 
@@ -1506,8 +1533,16 @@ static void i915_error_work_func(struct work_struct *work)
 		kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
 				   reset_event);
 
+		/*
+		 * All state reset _must_ be completed before we update the
+		 * reset counter, for otherwise waiters might miss the reset
+		 * pending state and not properly drop locks, resulting in
+		 * deadlocks with the reset work.
+		 */
 		ret = i915_reset(dev);
 
+		intel_display_handle_reset(dev);
+
 		if (ret == 0) {
 			/*
 			 * After all the gem state is reset, increment the reset
@@ -1528,12 +1563,11 @@ static void i915_error_work_func(struct work_struct *work)
 			atomic_set(&error->reset_counter, I915_WEDGED);
 		}
 
-		for_each_ring(ring, dev_priv, i)
-			wake_up_all(&ring->irq_queue);
-
-		intel_display_handle_reset(dev);
-
-		wake_up_all(&dev_priv->gpu_error.reset_queue);
+		/*
+		 * Note: The wake_up also serves as a memory barrier so that
+		 * waiters see the update value of the reset counter atomic_t.
+		 */
+		i915_error_wake_up(dev_priv, true);
 	}
 }
 
@@ -1642,8 +1676,6 @@ static void i915_report_and_clear_eir(struct drm_device *dev)
 void i915_handle_error(struct drm_device *dev, bool wedged)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_ring_buffer *ring;
-	int i;
 
 	i915_capture_error_state(dev);
 	i915_report_and_clear_eir(dev);
@@ -1653,11 +1685,19 @@ void i915_handle_error(struct drm_device *dev, bool wedged)
 				&dev_priv->gpu_error.reset_counter);
 
 		/*
-		 * Wakeup waiting processes so that the reset work item
-		 * doesn't deadlock trying to grab various locks.
+		 * Wakeup waiting processes so that the reset work function
+		 * i915_error_work_func doesn't deadlock trying to grab various
+		 * locks. By bumping the reset counter first, the woken
+		 * processes will see a reset in progress and back off,
+		 * releasing their locks and then wait for the reset completion.
+		 * We must do this for _all_ gpu waiters that might hold locks
+		 * that the reset work needs to acquire.
+		 *
+		 * Note: The wake_up serves as the required memory barrier to
+		 * ensure that the waiters see the updated value of the reset
+		 * counter atomic_t.
 		 */
-		for_each_ring(ring, dev_priv, i)
-			wake_up_all(&ring->irq_queue);
+		i915_error_wake_up(dev_priv, false);
 	}
 
 	/*

drivers/gpu/drm/i915/intel_ddi.c

@@ -778,7 +778,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
 			/* Can only use the always-on power well for eDP when
 			 * not using the panel fitter, and when not using motion
 			  * blur mitigation (which we don't support). */
-			if (intel_crtc->config.pch_pfit.size)
+			if (intel_crtc->config.pch_pfit.enabled)
 				temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
 			else
 				temp |= TRANS_DDI_EDP_INPUT_A_ON;

drivers/gpu/drm/i915/intel_display.c

@@ -2249,7 +2249,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		I915_WRITE(PIPESRC(intel_crtc->pipe),
 			   ((crtc->mode.hdisplay - 1) << 16) |
 			   (crtc->mode.vdisplay - 1));
-		if (!intel_crtc->config.pch_pfit.size &&
+		if (!intel_crtc->config.pch_pfit.enabled &&
 		    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
 		     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
 			I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
@@ -3203,7 +3203,7 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int pipe = crtc->pipe;
 
-	if (crtc->config.pch_pfit.size) {
+	if (crtc->config.pch_pfit.enabled) {
 		/* Force use of hard-coded filter coefficients
 		 * as some pre-programmed values are broken,
 		 * e.g. x201.
@@ -3428,7 +3428,7 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc)
 
 	/* To avoid upsetting the power well on haswell only disable the pfit if
 	 * it's in use. The hw state code will make sure we get this right. */
-	if (crtc->config.pch_pfit.size) {
+	if (crtc->config.pch_pfit.enabled) {
 		I915_WRITE(PF_CTL(pipe), 0);
 		I915_WRITE(PF_WIN_POS(pipe), 0);
 		I915_WRITE(PF_WIN_SZ(pipe), 0);
@@ -4877,9 +4877,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	if (is_lvds && dev_priv->lvds_downclock_avail) {
 		/*
 		 * Ensure we match the reduced clock's P to the target clock.
@@ -5768,9 +5765,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		intel_crtc->config.dpll.p2 = clock.p2;
 	}
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
 	if (intel_crtc->config.has_pch_encoder) {
 		fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
@@ -5859,6 +5853,7 @@ static void ironlake_get_pfit_config(struct intel_crtc *crtc,
 	tmp = I915_READ(PF_CTL(crtc->pipe));
 
 	if (tmp & PF_ENABLE) {
+		pipe_config->pch_pfit.enabled = true;
 		pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
 		pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
 
@@ -6236,7 +6231,7 @@ static void haswell_modeset_global_resources(struct drm_device *dev)
 		if (!crtc->base.enabled)
 			continue;
 
-		if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.size ||
+		if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.enabled ||
 		    crtc->config.cpu_transcoder != TRANSCODER_EDP)
 			enable = true;
 	}
@@ -6259,9 +6254,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	if (!intel_ddi_pll_mode_set(crtc))
 		return -EINVAL;
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	if (intel_crtc->config.has_dp_encoder)
 		intel_dp_set_m_n(intel_crtc);
 
@@ -6494,15 +6486,15 @@ static void haswell_write_eld(struct drm_connector *connector,
 
 	/* Set ELD valid state */
 	tmp = I915_READ(aud_cntrl_st2);
-	DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
 	tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
 	I915_WRITE(aud_cntrl_st2, tmp);
 	tmp = I915_READ(aud_cntrl_st2);
-	DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
 
 	/* Enable HDMI mode */
 	tmp = I915_READ(aud_config);
-	DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
 	/* clear N_programing_enable and N_value_index */
 	tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
 	I915_WRITE(aud_config, tmp);
@@ -6937,7 +6929,8 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	intel_crtc->cursor_width = width;
 	intel_crtc->cursor_height = height;
 
-	intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
+	if (intel_crtc->active)
+		intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
 
 	return 0;
 fail_unpin:
@@ -6956,7 +6949,8 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 	intel_crtc->cursor_x = x;
 	intel_crtc->cursor_y = y;
 
-	intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
+	if (intel_crtc->active)
+		intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
 
 	return 0;
 }
@@ -8205,9 +8199,10 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 		      pipe_config->gmch_pfit.control,
 		      pipe_config->gmch_pfit.pgm_ratios,
 		      pipe_config->gmch_pfit.lvds_border_bits);
-	DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x\n",
+	DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
 		      pipe_config->pch_pfit.pos,
-		      pipe_config->pch_pfit.size);
+		      pipe_config->pch_pfit.size,
+		      pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
 	DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
 }
 
@@ -8603,8 +8598,11 @@ intel_pipe_config_compare(struct drm_device *dev,
 	if (INTEL_INFO(dev)->gen < 4)
 		PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
 	PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
-	PIPE_CONF_CHECK_I(pch_pfit.pos);
-	PIPE_CONF_CHECK_I(pch_pfit.size);
+	PIPE_CONF_CHECK_I(pch_pfit.enabled);
+	if (current_config->pch_pfit.enabled) {
+		PIPE_CONF_CHECK_I(pch_pfit.pos);
+		PIPE_CONF_CHECK_I(pch_pfit.size);
+	}
 
 	PIPE_CONF_CHECK_I(ips_enabled);
 

drivers/gpu/drm/i915/intel_drv.h

@@ -280,6 +280,7 @@ struct intel_crtc_config {
 	struct {
 		u32 pos;
 		u32 size;
+		bool enabled;
 	} pch_pfit;
 
 	/* FDI configuration, only valid if has_pch_encoder is set. */

drivers/gpu/drm/i915/intel_dvo.c

@@ -263,6 +263,8 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 		C(vtotal);
 		C(clock);
 #undef C
+
+		drm_mode_set_crtcinfo(adjusted_mode, 0);
 	}
 
 	if (intel_dvo->dev.dev_ops->mode_fixup)

drivers/gpu/drm/i915/intel_panel.c

@@ -112,6 +112,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 done:
 	pipe_config->pch_pfit.pos = (x << 16) | y;
 	pipe_config->pch_pfit.size = (width << 16) | height;
+	pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0;
 }
 
 static void

drivers/gpu/drm/i915/intel_pm.c

@@ -2096,16 +2096,16 @@ static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
 				    struct drm_crtc *crtc)
 {
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	uint32_t pixel_rate, pfit_size;
+	uint32_t pixel_rate;
 
 	pixel_rate = intel_crtc->config.adjusted_mode.clock;
 
 	/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
 	 * adjust the pixel_rate here. */
 
-	pfit_size = intel_crtc->config.pch_pfit.size;
-	if (pfit_size) {
+	if (intel_crtc->config.pch_pfit.enabled) {
 		uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
+		uint32_t pfit_size = intel_crtc->config.pch_pfit.size;
 
 		pipe_w = intel_crtc->config.requested_mode.hdisplay;
 		pipe_h = intel_crtc->config.requested_mode.vdisplay;