Merge tag 'regulator-v3.13-rc1' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A bunch of fixes, a few driver specific ones and a framework fix for
  voltage enumeration on fixed voltage regulators which had previously
  worked but had been misplaced during some refactoring causing problems
  for users that needed to know the voltage"

* tag 'regulator-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: arizona-micsupp: Correct wm5110 voltage selection
  regulator: pfuze100: allow misprogrammed ID
  regulator: fixed: fix regulator_list_voltage() for regression
  regulator: gpio-regulator: Don't oops on missing regulator-type property

drivers/regulator/arizona-micsupp.c

@@ -174,6 +174,33 @@ static const struct regulator_desc arizona_micsupp = {
 	.owner = THIS_MODULE,
 };
 
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+	REGULATOR_LINEAR_RANGE(900000,  0,    0x14, 25000),
+	REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+	.name = "MICVDD",
+	.supply_name = "CPVDD",
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = 40,
+	.ops = &arizona_micsupp_ops,
+
+	.vsel_reg = ARIZONA_LDO2_CONTROL_1,
+	.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+	.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.enable_mask = ARIZONA_CPMIC_ENA,
+	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+	.linear_ranges = arizona_micsupp_ext_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
 static const struct regulator_init_data arizona_micsupp_default = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@@ -186,9 +213,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_BYPASS,
+		.min_uV = 900000,
+		.max_uV = 3300000,
+	},
+
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_micsupp_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_micsupp *micsupp;
 	int ret;
@@ -207,7 +247,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 	 * default init_data for it.  This will be overridden with
 	 * platform data if provided.
 	 */
-	micsupp->init_data = arizona_micsupp_default;
+	switch (arizona->type) {
+	case WM5110:
+		desc = &arizona_micsupp_ext;
+		micsupp->init_data = arizona_micsupp_ext_default;
+		break;
+	default:
+		desc = &arizona_micsupp;
+		micsupp->init_data = arizona_micsupp_default;
+		break;
+	}
+
 	micsupp->init_data.consumer_supplies = &micsupp->supply;
 	micsupp->supply.supply = "MICVDD";
 	micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -226,7 +276,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 			   ARIZONA_CPMIC_BYPASS, 0);
 
 	micsupp->regulator = devm_regulator_register(&pdev->dev,
-						     &arizona_micsupp,
+						     desc,
 						     &config);
 	if (IS_ERR(micsupp->regulator)) {
 		ret = PTR_ERR(micsupp->regulator);

drivers/regulator/core.c

@@ -2184,6 +2184,9 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 	struct regulator_ops	*ops = rdev->desc->ops;
 	int			ret;
 
+	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+		return rdev->desc->fixed_uV;
+
 	if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 

drivers/regulator/gpio-regulator.c

@@ -139,6 +139,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 	struct property *prop;
 	const char *regtype;
 	int proplen, gpio, i;
+	int ret;
 
 	config = devm_kzalloc(dev,
 			sizeof(struct gpio_regulator_config),
@@ -202,7 +203,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 	}
 	config->nr_states = i;
 
-	of_property_read_string(np, "regulator-type", &regtype);
+	ret = of_property_read_string(np, "regulator-type", &regtype);
+	if (ret < 0) {
+		dev_err(dev, "Missing 'regulator-type' property\n");
+		return ERR_PTR(-EINVAL);
+	}
 
 	if (!strncmp("voltage", regtype, 7))
 		config->type = REGULATOR_VOLTAGE;

drivers/regulator/pfuze100-regulator.c

@@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 	if (ret)
 		return ret;
 
-	if (value & 0x0f) {
-		dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-		return -ENODEV;
+	switch (value & 0x0f) {
+		/* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
+		case 0x8:
+			dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+		case 0x0:
+			break;
+		default:
+			dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+			return -ENODEV;
 	}
 
 	ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);