Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/lliubbo/blackfin

Pull blackfin changes from Bob Liu:
 "The biggest change was added an new processor(bf60x series).

  Bf60x series processor of blackfin can up to 1GHz with Hardware
  Support for HD Video Analytics, it use the same blackfin ISA but with
  some changes on system buses, interrupt controller and peripheral
  devices.

  Added dir arch/blackfin/mach-bf609/ and did some changes to the
  framework made linux working fine on the reference board bf609-ezkit
  now."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (41 commits)
  blackfin: fix build after add bf60x mach/pm.h
  blackfin: twi: include linux/i2c.h
  blackfin: bf60x: add head file for crc controller
  blackfin: bf60x: twi: work around temporary anomaly 0501001
  blackfin: twi: Move TWI MMR access macro to twi head file
  blackfin: twi: Move TWI peripheral pin request array to platform data
  blackfin: bf60x: anomaly: Add a temporary anomaly 0501001
  blackfin: bf60x: Rename the DDR controller macro
  blackfin: mach-bf609: pm: cleanup bfin_deepsleep
  blackfin: bf60x: cleanup get clock code
  blackfin: bf60x: pm: Add a debug option to calculate kernel wakeup time.
  blackfin: bf60x: add wakeup source select
  blackfin: bf60x: make clock changeable in kernel menuconfig
  blackfin:mach-bf609: fix norflash for bf609-ezkit
  blackfin: mach-bf609: add can_wakeup to ethernet device
  blackfin: remove redundant CONFIG_BF60x macro
  blackfin: rotary: Add pm_wakeup flag to platform data structure.
  bfin_gpio: fix bf548-ezkit kernel fail to boot
  bfin_dma: fix initcall return error in proc_dma_init()
  Blackfin: delete fork func
  ...

arch/blackfin/Clear_BSD.txt

@@ -0,0 +1,33 @@
+The Clear BSD license:
+
+Copyright (c) 2012, Analog Devices, Inc.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted (subject to the limitations in the
+disclaimer below) provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the
+   distribution.
+
+* Neither the name of Analog Devices, Inc.  nor the names of its
+   contributors may be used to endorse or promote products derived
+   from this software without specific prior written permission.
+
+NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
+GRANTED BY THIS LICENSE.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

arch/blackfin/Kconfig

@@ -226,6 +226,12 @@ config BF561
 	help
 	  BF561 Processor Support.
 
+config BF609
+	bool "BF609"
+	select CLKDEV_LOOKUP
+	help
+	  BF609 Processor Support.
+
 endchoice
 
 config SMP
@@ -251,27 +257,27 @@ config HOTPLUG_CPU
 
 config BF_REV_MIN
 	int
-	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
+	default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
 	default 2 if (BF537 || BF536 || BF534)
 	default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
 	default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
 	int
-	default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+	default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
 	default 3 if (BF537 || BF536 || BF534 || BF54xM)
 	default 5 if (BF561 || BF538 || BF539)
 	default 6 if (BF533 || BF532 || BF531)
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_0 if (BF51x || BF52x)
+	default BF_REV_0_0 if (BF51x || BF52x || BF60x)
 	default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
 	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF51x || BF52x || (BF54x && !BF54xM))
+	depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
 
 config BF_REV_0_1
 	bool "0.1"
@@ -350,6 +356,7 @@ source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
 source "arch/blackfin/mach-bf538/Kconfig"
 source "arch/blackfin/mach-bf548/Kconfig"
+source "arch/blackfin/mach-bf609/Kconfig"
 
 menu "Board customizations"
 
@@ -379,6 +386,12 @@ config BOOT_LOAD
 	  memory region is used to capture NULL pointer references as well
 	  as some core kernel functions.
 
+config PHY_RAM_BASE_ADDRESS
+	hex "Physical RAM Base"
+	default 0x0
+	help
+	  set BF609 FPGA physical SRAM base address
+
 config ROM_BASE
 	hex "Kernel ROM Base"
 	depends on ROMKERNEL
@@ -422,7 +435,7 @@ config BFIN_KERNEL_CLOCK
 
 config PLL_BYPASS
 	bool "Bypass PLL"
-	depends on BFIN_KERNEL_CLOCK
+	depends on BFIN_KERNEL_CLOCK && (!BF60x)
 	default n
 
 config CLKIN_HALF
@@ -441,7 +454,7 @@ config VCO_MULT
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
-	default "20" if BFIN561_EZKIT
+	default "20" if (BFIN561_EZKIT || BF609)
 	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
 	default "25" if BFIN527_AD7160EVAL
 	help
@@ -473,12 +486,45 @@ config SCLK_DIV
 	int "System Clock Divider"
 	depends on BFIN_KERNEL_CLOCK
 	range 1 15
-	default 5
+	default 4
 	help
-	  This sets the frequency of the system clock (including SDRAM or DDR).
+	  This sets the frequency of the system clock (including SDRAM or DDR) on
+	  !BF60x else it set the clock for system buses and provides the
+	  source from which SCLK0 and SCLK1 are derived.
 	  This can be between 1 and 15
 	  System Clock = (PLL frequency) / (this setting)
 
+config SCLK0_DIV
+	int "System Clock0 Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 1
+	help
+	  This sets the frequency of the system clock0 for PVP and all other
+	  peripherals not clocked by SCLK1.
+	  This can be between 1 and 15
+	  System Clock0 = (System Clock) / (this setting)
+
+config SCLK1_DIV
+	int "System Clock1 Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 1
+	help
+	  This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
+	  This can be between 1 and 15
+	  System Clock1 = (System Clock) / (this setting)
+
+config DCLK_DIV
+	int "DDR Clock Divider"
+	depends on BFIN_KERNEL_CLOCK && BF60x
+	range 1 15
+	default 2
+	help
+	  This sets the frequency of the DDR memory.
+	  This can be between 1 and 15
+	  DDR Clock = (PLL frequency) / (this setting)
+
 choice
 	prompt "DDR SDRAM Chip Type"
 	depends on BFIN_KERNEL_CLOCK
@@ -494,7 +540,7 @@ endchoice
 
 choice
 	prompt "DDR/SDRAM Timing"
-	depends on BFIN_KERNEL_CLOCK
+	depends on BFIN_KERNEL_CLOCK && !BF60x
 	default BFIN_KERNEL_CLOCK_MEMINIT_CALC
 	help
 	  This option allows you to specify Blackfin SDRAM/DDR Timing parameters
@@ -576,13 +622,15 @@ config MAX_VCO_HZ
 	default 600000000 if BF548
 	default 533333333 if BF549
 	default 600000000 if BF561
+	default 800000000 if BF609
 
 config MIN_VCO_HZ
 	int
 	default 50000000
 
 config MAX_SCLK_HZ
 	int
+	default 200000000 if BF609
 	default 133333333
 
 config MIN_SCLK_HZ
@@ -1051,7 +1099,7 @@ endchoice
 config BFIN_L2_DCACHEABLE
 	bool "Enable DCACHE for L2 SRAM"
 	depends on BFIN_DCACHE
-	depends on (BF54x || BF561) && !SMP
+	depends on (BF54x || BF561 || BF60x) && !SMP
 	default n
 choice
 	prompt "L2 SRAM DCACHE policy"
@@ -1077,6 +1125,7 @@ config MPU
 comment "Asynchronous Memory Configuration"
 
 menu "EBIU_AMGCTL Global Control"
+	depends on !BF60x
 config C_AMCKEN
 	bool "Enable CLKOUT"
 	default y
@@ -1127,6 +1176,7 @@ endchoice
 endmenu
 
 menu "EBIU_AMBCTL Control"
+	depends on !BF60x
 config BANK_0
 	hex "Bank 0 (AMBCTL0.L)"
 	default 0x7BB0
@@ -1206,7 +1256,7 @@ config ARCH_SUSPEND_POSSIBLE
 
 choice
 	prompt "Standby Power Saving Mode"
-	depends on PM
+	depends on PM && !BF60x
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
 	bool "Sleep Deeper"
@@ -1261,6 +1311,118 @@ config PM_BFIN_WAKE_GP
 	  On ADSP-BF549 this option enables the the same functionality on the
 	  /MRXON pin also PH7.
 
+config PM_BFIN_WAKE_PA15
+	bool "Allow Wake-Up from PA15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PA15 Wake-Up
+
+config PM_BFIN_WAKE_PA15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PA15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PB15
+	bool "Allow Wake-Up from PB15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PB15 Wake-Up
+
+config PM_BFIN_WAKE_PB15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PB15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PC15
+	bool "Allow Wake-Up from PC15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PC15 Wake-Up
+
+config PM_BFIN_WAKE_PC15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PC15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PD06
+	bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PD06(ETH0_PHYINT) Wake-up
+
+config PM_BFIN_WAKE_PD06_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PD06
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PE12
+	bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
+
+config PM_BFIN_WAKE_PE12_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PE12
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG04
+	bool "Allow Wake-Up from PG04(CAN0_RX)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG04(CAN0_RX) Wake-up
+
+config PM_BFIN_WAKE_PG04_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG04
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG13
+	bool "Allow Wake-Up from PG13"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG13 Wake-Up
+
+config PM_BFIN_WAKE_PG13_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG13
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_USB
+	bool "Allow Wake-Up from (USB)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable (USB) Wake-up
+
+config PM_BFIN_WAKE_USB_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_USB
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
 endmenu
 
 menu "CPU Frequency scaling"

arch/blackfin/Kconfig.debug

@@ -253,4 +253,11 @@ config BFIN_PSEUDODBG_INSNS
 
 	  Most people should say N here.
 
+config BFIN_PM_WAKEUP_TIME_BENCH
+	bool "Display the total time for kernel to resume from power saving mode"
+	default n
+	help
+	  Display the total time when kernel resumes normal from standby or
+	  suspend to mem mode.
+
 endmenu