ARM: dts: lan966x: add support for pcb8290

Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
quad-port) on the external MDIO bus and no SFP ports.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com

arch/arm/boot/dts/Makefile

@@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \
 dtb-$(CONFIG_SOC_LAN966) += \
 	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
 	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
 	lan966x-pcb8291.dtb \
 	lan966x-pcb8309.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \

arch/arm/boot/dts/lan966x-pcb8290.dts

@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins =  "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};