Merge tag 'iio-fixes-for-6.10b' of ssh://gitolite.kernel.org/pub/scm/…

…linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

IIO: 2nd set of fixes for 6.10

The usual mixed bag of new stuff and long term issues that have surfaced
as a particular driver gets more adoption.

adi,ad7266
- Add missing error check that could lead to bad data being reported.
adi,ad9739a
- Fix Kconfig to not allow COMPILE_TEST to override lack SPI support.
bosch,bme680
- Fix units for pressure value (off by factor of 10)
- Fix sign on a calibration variable read back from the device
- Avoid integer overflow in compensation functions.
- Fix an issue with read sequence that leads to stale data and bad first
  reading.
freescale,fxls8962af
- Kconfig dependency fixes.
ti,hdc3020
- Fix representation of hysteresis to match ABI by being an offset from
  the current event threshold, not an absolute value.
xilinx,ams
- Don't include the ams_ctrl_channels in a computed mask.  This driver is
  making an unusual use of scan_mask (it doesn't support buffers) and that
  lead to an overflow.

* tag 'iio-fixes-for-6.10b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: chemical: bme680: Fix sensor data read operation
  iio: chemical: bme680: Fix overflows in compensate() functions
  iio: chemical: bme680: Fix calibration data variable
  iio: chemical: bme680: Fix pressure value output
  iio: humidity: hdc3020: fix hysteresis representation
  iio: dac: fix ad9739a random config compile error
  iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
  iio: adc: ad7266: Fix variable checking bug
  iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask

drivers/iio/accel/Kconfig

@@ -330,6 +330,8 @@ config DMARD10
 config FXLS8962AF
 	tristate
 	depends on I2C || !I2C # cannot be built-in for modular I2C
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
 
 config FXLS8962AF_I2C
 	tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver"

drivers/iio/adc/ad7266.c

@@ -157,6 +157,8 @@ static int ad7266_read_raw(struct iio_dev *indio_dev,
 		ret = ad7266_read_single(st, val, chan->address);
 		iio_device_release_direct_mode(indio_dev);
 
+		if (ret < 0)
+			return ret;
 		*val = (*val >> 2) & 0xfff;
 		if (chan->scan_type.sign == 's')
 			*val = sign_extend32(*val,

drivers/iio/adc/xilinx-ams.c

@@ -414,8 +414,12 @@ static void ams_enable_channel_sequence(struct iio_dev *indio_dev)
 
 	/* Run calibration of PS & PL as part of the sequence */
 	scan_mask = BIT(0) | BIT(AMS_PS_SEQ_MAX);
-	for (i = 0; i < indio_dev->num_channels; i++)
-		scan_mask |= BIT_ULL(indio_dev->channels[i].scan_index);
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		const struct iio_chan_spec *chan = &indio_dev->channels[i];
+
+		if (chan->scan_index < AMS_CTRL_SEQ_BASE)
+			scan_mask |= BIT_ULL(chan->scan_index);
+	}
 
 	if (ams->ps_base) {
 		/* put sysmon in a soft reset to change the sequence */

drivers/iio/chemical/bme680.h

@@ -54,7 +54,9 @@
 #define   BME680_NB_CONV_MASK			GENMASK(3, 0)
 
 #define BME680_REG_MEAS_STAT_0			0x1D
+#define   BME680_NEW_DATA_BIT			BIT(7)
 #define   BME680_GAS_MEAS_BIT			BIT(6)
+#define   BME680_MEAS_BIT			BIT(5)
 
 /* Calibration Parameters */
 #define BME680_T2_LSB_REG	0x8A

drivers/iio/chemical/bme680_core.c

@@ -10,6 +10,7 @@
  */
 #include <linux/acpi.h>
 #include <linux/bitfield.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/log2.h>
@@ -38,7 +39,7 @@ struct bme680_calib {
 	s8  par_h3;
 	s8  par_h4;
 	s8  par_h5;
-	s8  par_h6;
+	u8  par_h6;
 	s8  par_h7;
 	s8  par_gh1;
 	s16 par_gh2;
@@ -342,10 +343,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data,
 	if (!calib->par_t2)
 		bme680_read_calib(data, calib);
 
-	var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
+	var1 = (adc_temp >> 3) - ((s32)calib->par_t1 << 1);
 	var2 = (var1 * calib->par_t2) >> 11;
 	var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
-	var3 = (var3 * (calib->par_t3 << 4)) >> 14;
+	var3 = (var3 * ((s32)calib->par_t3 << 4)) >> 14;
 	data->t_fine = var2 + var3;
 	calc_temp = (data->t_fine * 5 + 128) >> 8;
 
@@ -368,9 +369,9 @@ static u32 bme680_compensate_press(struct bme680_data *data,
 	var1 = (data->t_fine >> 1) - 64000;
 	var2 = ((((var1 >> 2) * (var1 >> 2)) >> 11) * calib->par_p6) >> 2;
 	var2 = var2 + (var1 * calib->par_p5 << 1);
-	var2 = (var2 >> 2) + (calib->par_p4 << 16);
+	var2 = (var2 >> 2) + ((s32)calib->par_p4 << 16);
 	var1 = (((((var1 >> 2) * (var1 >> 2)) >> 13) *
-			(calib->par_p3 << 5)) >> 3) +
+			((s32)calib->par_p3 << 5)) >> 3) +
 			((calib->par_p2 * var1) >> 1);
 	var1 = var1 >> 18;
 	var1 = ((32768 + var1) * calib->par_p1) >> 15;
@@ -388,7 +389,7 @@ static u32 bme680_compensate_press(struct bme680_data *data,
 	var3 = ((press_comp >> 8) * (press_comp >> 8) *
 			(press_comp >> 8) * calib->par_p10) >> 17;
 
-	press_comp += (var1 + var2 + var3 + (calib->par_p7 << 7)) >> 4;
+	press_comp += (var1 + var2 + var3 + ((s32)calib->par_p7 << 7)) >> 4;
 
 	return press_comp;
 }
@@ -414,7 +415,7 @@ static u32 bme680_compensate_humid(struct bme680_data *data,
 		 (((temp_scaled * ((temp_scaled * calib->par_h5) / 100))
 		   >> 6) / 100) + (1 << 14))) >> 10;
 	var3 = var1 * var2;
-	var4 = calib->par_h6 << 7;
+	var4 = (s32)calib->par_h6 << 7;
 	var4 = (var4 + ((temp_scaled * calib->par_h7) / 100)) >> 4;
 	var5 = ((var3 >> 14) * (var3 >> 14)) >> 10;
 	var6 = (var4 * var5) >> 1;
@@ -532,6 +533,43 @@ static u8 bme680_oversampling_to_reg(u8 val)
 	return ilog2(val) + 1;
 }
 
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L490
+ */
+static int bme680_wait_for_eoc(struct bme680_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	unsigned int check;
+	int ret;
+	/*
+	 * (Sum of oversampling ratios * time per oversampling) +
+	 * TPH measurement + gas measurement + wait transition from forced mode
+	 * + heater duration
+	 */
+	int wait_eoc_us = ((data->oversampling_temp + data->oversampling_press +
+			   data->oversampling_humid) * 1936) + (477 * 4) +
+			   (477 * 5) + 1000 + (data->heater_dur * 1000);
+
+	usleep_range(wait_eoc_us, wait_eoc_us + 100);
+
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
+	if (ret) {
+		dev_err(dev, "failed to read measurement status register.\n");
+		return ret;
+	}
+	if (check & BME680_MEAS_BIT) {
+		dev_err(dev, "Device measurement cycle incomplete.\n");
+		return -EBUSY;
+	}
+	if (!(check & BME680_NEW_DATA_BIT)) {
+		dev_err(dev, "No new data available from the device.\n");
+		return -ENODATA;
+	}
+
+	return 0;
+}
+
 static int bme680_chip_config(struct bme680_data *data)
 {
 	struct device *dev = regmap_get_device(data->regmap);
@@ -622,6 +660,10 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
 	if (ret < 0)
 		return ret;
 
+	ret = bme680_wait_for_eoc(data);
+	if (ret)
+		return ret;
+
 	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
 			       &tmp, 3);
 	if (ret < 0) {
@@ -678,7 +720,7 @@ static int bme680_read_press(struct bme680_data *data,
 	}
 
 	*val = bme680_compensate_press(data, adc_press);
-	*val2 = 100;
+	*val2 = 1000;
 	return IIO_VAL_FRACTIONAL;
 }
 
@@ -738,6 +780,10 @@ static int bme680_read_gas(struct bme680_data *data,
 	if (ret < 0)
 		return ret;
 
+	ret = bme680_wait_for_eoc(data);
+	if (ret)
+		return ret;
+
 	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
 	if (check & BME680_GAS_MEAS_BIT) {
 		dev_err(dev, "gas measurement incomplete\n");

drivers/iio/dac/Kconfig

@@ -133,7 +133,7 @@ config AD5624R_SPI
 
 config AD9739A
 	tristate "Analog Devices AD9739A RF DAC spi driver"
-	depends on SPI || COMPILE_TEST
+	depends on SPI
 	select REGMAP_SPI
 	select IIO_BACKEND
 	help