Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A range of ARM fixes.  Biggest change is the stage-2 attributes used
  for for hyp mode which were wrong.  I've killed some bits in a couple
  of DT files which turned out not to be required, and a few other
  fixes.

  One fix touches code outside of arch/arm, which is related to sorting
  out the DMA masks correctly.  There is a long standing issue with the
  conversion from PFNs to addresses where people assume that shifting an
  unsigned long left by PAGE_SHIFT results in a correct address.  This
  is not the case with C: the integer promotion happens at assignment
  after evaluation.  This fixes the recently introduced dma_max_pfn()
  function, but there's a number of other places where we try this
  directly on an unsigned long in the mm code"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
  Fix uses of dma_max_pfn() when converting to a limiting address
  ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
  ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
  ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
  ARM: 7950/1: mm: Fix stage-2 device memory attributes
  ARM: dts: fix spdif pinmux configuration

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -52,12 +52,6 @@
 		};
 	};
 
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	};
-
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
@@ -111,7 +105,7 @@
 		};
 
 		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
 		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
@@ -142,6 +136,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -46,12 +46,6 @@
 		};
 	};
 
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	};
-
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
@@ -89,7 +83,7 @@
 		};
 
 		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
@@ -121,6 +115,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
 	status = "okay";
 };
 

arch/arm/include/asm/cacheflush.h

@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 static inline void __flush_icache_all(void)
 {
 	__flush_icache_preferred();
+	dsb();
 }
 
 /*

arch/arm/include/asm/pgtable-3level.h

@@ -120,13 +120,16 @@
 /*
  * 2nd stage PTE definitions for LPAE.
  */
-#define L_PTE_S2_MT_UNCACHED	 (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITEBACK	 (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_RDONLY		 (_AT(pteval_t, 1) << 6)   /* HAP[1]   */
-#define L_PTE_S2_RDWR		 (_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
+#define L_PTE_S2_MT_UNCACHED		(_AT(pteval_t, 0x0) << 2) /* strongly ordered */
+#define L_PTE_S2_MT_WRITETHROUGH	(_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
+#define L_PTE_S2_MT_WRITEBACK		(_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
+#define L_PTE_S2_MT_DEV_SHARED		(_AT(pteval_t, 0x1) << 2) /* device */
+#define L_PTE_S2_MT_MASK		(_AT(pteval_t, 0xf) << 2)
 
-#define L_PMD_S2_RDWR		 (_AT(pmdval_t, 3) << 6)   /* HAP[2:1] */
+#define L_PTE_S2_RDONLY			(_AT(pteval_t, 1) << 6)   /* HAP[1]   */
+#define L_PTE_S2_RDWR			(_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
+
+#define L_PMD_S2_RDWR			(_AT(pmdval_t, 3) << 6)   /* HAP[2:1] */
 
 /*
  * Hyp-mode PL2 PTE definitions for LPAE.

arch/arm/include/asm/spinlock.h

@@ -37,18 +37,9 @@
 
 static inline void dsb_sev(void)
 {
-#if __LINUX_ARM_ARCH__ >= 7
-	__asm__ __volatile__ (
-		"dsb ishst\n"
-		SEV
-	);
-#else
-	__asm__ __volatile__ (
-		"mcr p15, 0, %0, c7, c10, 4\n"
-		SEV
-		: : "r" (0)
-	);
-#endif
+
+	dsb(ishst);
+	__asm__(SEV);
 }
 
 /*

arch/arm/kernel/setup.c

@@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for_each_memblock(memory, region) {
-		res = memblock_virt_alloc_low(sizeof(*res), 0);
+		res = memblock_virt_alloc(sizeof(*res), 0);
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;

arch/arm/mm/mm.h

@@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
 
 struct mem_type {
 	pteval_t prot_pte;
+	pteval_t prot_pte_s2;
 	pmdval_t prot_l1;
 	pmdval_t prot_sect;
 	unsigned int domain;

arch/arm/mm/mmu.c

@@ -232,12 +232,16 @@ __setup("noalign", noalign_setup);
 #endif /* ifdef CONFIG_CPU_CP15 / else */
 
 #define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
+#define PROT_PTE_S2_DEVICE	PROT_PTE_DEVICE
 #define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 
 static struct mem_type mem_types[] = {
 	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 				  L_PTE_SHARED,
+		.prot_pte_s2	= s2_policy(PROT_PTE_S2_DEVICE) |
+				  s2_policy(L_PTE_S2_MT_DEV_SHARED) |
+				  L_PTE_SHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_S,
 		.domain		= DOMAIN_IO,
@@ -508,7 +512,8 @@ static void __init build_mem_type_table(void)
 	cp = &cache_policies[cachepolicy];
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 	s2_pgprot = cp->pte_s2;
-	hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+	hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+	s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
 
 	/*
 	 * ARMv6 and above have extended page tables.

arch/arm/mm/proc-v6.S

@@ -208,7 +208,6 @@ __v6_setup:
 	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
@@ -218,6 +217,8 @@ __v6_setup:
 	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
 	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer and
+						@ complete invalidations
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
  ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables

arch/arm/mm/proc-v7.S

@@ -351,7 +351,6 @@ __v7_setup:
 
 4:	mov	r10, #0
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	v7_ttb_setup r10, r4, r8, r5		@ TTBCR, TTBRx setup
@@ -360,6 +359,7 @@ __v7_setup:
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+	dsb					@ Complete invalidations
 #ifndef CONFIG_ARM_THUMBEE
 	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
 	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field

drivers/mmc/card/queue.c

@@ -197,7 +197,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
-		limit = dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
+		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
 
 	mq->card = card;
 	mq->queue = blk_init_queue(mmc_request_fn, lock);

drivers/scsi/scsi_lib.c

@@ -1684,7 +1684,7 @@ u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
 
 	host_dev = scsi_get_device(shost);
 	if (host_dev && host_dev->dma_mask)
-		bounce_limit = dma_max_pfn(host_dev) << PAGE_SHIFT;
+		bounce_limit = (u64)dma_max_pfn(host_dev) << PAGE_SHIFT;
 
 	return bounce_limit;
 }