irqchip/gic-v3-its: Add ability to resend MAPC on resume

This adds functionality to resend the MAPC command to an ITS node on
resume. If the ITS is powered down during suspend and the collections
are not backed by memory, the ITS will lose that state. This just sets
up the known state for the collections after the ITS is restored.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

drivers/irqchip/irq-gic-v3-its.c

@@ -1942,52 +1942,53 @@ static void its_cpu_init_lpis(void)
 	dsb(sy);
 }
 
-static void its_cpu_init_collection(void)
+static void its_cpu_init_collection(struct its_node *its)
 {
-	struct its_node *its;
-	int cpu;
-
-	spin_lock(&its_lock);
-	cpu = smp_processor_id();
-
-	list_for_each_entry(its, &its_nodes, entry) {
-		u64 target;
+	int cpu = smp_processor_id();
+	u64 target;
 
-		/* avoid cross node collections and its mapping */
-		if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
-			struct device_node *cpu_node;
+	/* avoid cross node collections and its mapping */
+	if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
+		struct device_node *cpu_node;
 
-			cpu_node = of_get_cpu_node(cpu, NULL);
-			if (its->numa_node != NUMA_NO_NODE &&
-				its->numa_node != of_node_to_nid(cpu_node))
-				continue;
-		}
+		cpu_node = of_get_cpu_node(cpu, NULL);
+		if (its->numa_node != NUMA_NO_NODE &&
+			its->numa_node != of_node_to_nid(cpu_node))
+			return;
+	}
 
+	/*
+	 * We now have to bind each collection to its target
+	 * redistributor.
+	 */
+	if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
 		/*
-		 * We now have to bind each collection to its target
+		 * This ITS wants the physical address of the
 		 * redistributor.
 		 */
-		if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
-			/*
-			 * This ITS wants the physical address of the
-			 * redistributor.
-			 */
-			target = gic_data_rdist()->phys_base;
-		} else {
-			/*
-			 * This ITS wants a linear CPU number.
-			 */
-			target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
-			target = GICR_TYPER_CPU_NUMBER(target) << 16;
-		}
+		target = gic_data_rdist()->phys_base;
+	} else {
+		/* This ITS wants a linear CPU number. */
+		target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
+		target = GICR_TYPER_CPU_NUMBER(target) << 16;
+	}
 
-		/* Perform collection mapping */
-		its->collections[cpu].target_address = target;
-		its->collections[cpu].col_id = cpu;
+	/* Perform collection mapping */
+	its->collections[cpu].target_address = target;
+	its->collections[cpu].col_id = cpu;
 
-		its_send_mapc(its, &its->collections[cpu], 1);
-		its_send_invall(its, &its->collections[cpu]);
-	}
+	its_send_mapc(its, &its->collections[cpu], 1);
+	its_send_invall(its, &its->collections[cpu]);
+}
+
+static void its_cpu_init_collections(void)
+{
+	struct its_node *its;
+
+	spin_lock(&its_lock);
+
+	list_for_each_entry(its, &its_nodes, entry)
+		its_cpu_init_collection(its);
 
 	spin_unlock(&its_lock);
 }
@@ -3135,6 +3136,15 @@ static void its_restore_enable(void)
 			its_write_baser(its, baser, baser->val);
 		}
 		writel_relaxed(its->ctlr_save, base + GITS_CTLR);
+
+		/*
+		 * Reinit the collection if it's stored in the ITS. This is
+		 * indicated by the col_id being less than the HCC field.
+		 * CID < HCC as specified in the GIC v3 Documentation.
+		 */
+		if (its->collections[smp_processor_id()].col_id <
+		    GITS_TYPER_HCC(gic_read_typer(base + GITS_TYPER)))
+			its_cpu_init_collection(its);
 	}
 	spin_unlock(&its_lock);
 }
@@ -3401,7 +3411,7 @@ int its_cpu_init(void)
 			return -ENXIO;
 		}
 		its_cpu_init_lpis();
-		its_cpu_init_collection();
+		its_cpu_init_collections();
 	}
 
 	return 0;