Merge tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/mips/linux

Pull MIPS updates from Paul Burton:

 - A set of memblock initialization improvements thanks to Serge Semin,
   tidying up after our conversion from bootmem to memblock back in
   v4.20.

 - Our eBPF JIT the previously supported only MIPS64r2 through MIPS64r5
   is improved to also support MIPS64r6. Support for MIPS32 systems is
   introduced, with the caveat that it only works for programs that
   don't use 64 bit registers or operations - those will bail out & need
   to be interpreted.

 - Improvements to the allocation & configuration of our exception
   vector that should fix issues seen on some platforms using recent
   versions of U-Boot.

 - Some minor improvements to code generated for jump labels, along with
   enabling them by default for generic kernels.

* tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (27 commits)
  mips: Manually call fdt_init_reserved_mem() method
  mips: Make sure dt memory regions are valid
  mips: Perform early low memory test
  mips: Dump memblock regions for debugging
  mips: Add reserve-nomap memory type support
  mips: Use memblock to reserve the __nosave memory range
  mips: Discard post-CMA-init foreach loop
  mips: Reserve memory for the kernel image resources
  MIPS: Remove duplicate EBase configuration
  MIPS: Sync icache for whole exception vector
  MIPS: Always allocate exception vector for MIPSr2+
  MIPS: Use memblock_phys_alloc() for exception vector
  mips: Combine memblock init and memory reservation loops
  mips: Discard rudiments from bootmem_init
  mips: Make sure kernel .bss exists in boot mem pool
  mips: vdso: drop unnecessary cc-ldoption
  Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices"
  MIPS: generic: Enable CONFIG_JUMP_LABEL
  MIPS: jump_label: Use compact branches for >= r6
  MIPS: jump_label: Remove redundant nops
  ...

arch/mips/Kconfig

@@ -44,8 +44,7 @@ config MIPS
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
-	select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
-	select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
+	select HAVE_EBPF_JIT if (!CPU_MICROMIPS)
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
@@ -276,7 +275,7 @@ config BCM47XX
 	select BCM47XX_SPROM
 	select BCM47XX_SSB if !BCM47XX_BCMA
 	help
-	 Support for BCM47XX based boards
+	  Support for BCM47XX based boards
 
 config BCM63XX
 	bool "Broadcom BCM63XX based boards"
@@ -295,7 +294,7 @@ config BCM63XX
 	select MIPS_L1_CACHE_SHIFT_4
 	select CLKDEV_LOOKUP
 	help
-	 Support for BCM63XX based boards
+	  Support for BCM63XX based boards
 
 config MIPS_COBALT
 	bool "Cobalt Server"
@@ -374,10 +373,10 @@ config MACH_JAZZ
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_100HZ
 	help
-	 This a family of machines based on the MIPS R4030 chipset which was
-	 used by several vendors to build RISC/os and Windows NT workstations.
-	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
-	 Olivetti M700-10 workstations.
+	  This a family of machines based on the MIPS R4030 chipset which was
+	  used by several vendors to build RISC/os and Windows NT workstations.
+	  Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
+	  Olivetti M700-10 workstations.
 
 config MACH_INGENIC
 	bool "Ingenic SoC based machines"
@@ -573,14 +572,14 @@ config NXP_STB220
 	bool "NXP STB220 board"
 	select SOC_PNX833X
 	help
-	 Support for NXP Semiconductors STB220 Development Board.
+	  Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
-	 Support for NXP Semiconductors STB225 Development Board.
+	  Support for NXP Semiconductors STB225 Development Board.
 
 config PMC_MSP
 	bool "PMC-Sierra MSP chipsets"
@@ -722,9 +721,9 @@ config SGI_IP28
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select MIPS_L1_CACHE_SHIFT_7
-      help
-        This is the SGI Indigo2 with R10000 processor.  To compile a Linux
-        kernel that runs on these, say Y here.
+	help
+	  This is the SGI Indigo2 with R10000 processor.  To compile a Linux
+	  kernel that runs on these, say Y here.
 
 config SGI_IP32
 	bool "SGI IP32 (O2)"
@@ -1168,9 +1167,9 @@ config HOLES_IN_ZONE
 config SYS_SUPPORTS_RELOCATABLE
 	bool
 	help
-	 Selected if the platform supports relocating the kernel.
-	 The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
-	 to allow access to command line and entropy sources.
+	  Selected if the platform supports relocating the kernel.
+	  The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
+	  to allow access to command line and entropy sources.
 
 config MIPS_CBPF_JIT
 	def_bool y
@@ -2113,8 +2112,8 @@ config MIPS_PGD_C0_CONTEXT
 # Set to y for ptrace access to watch registers.
 #
 config HARDWARE_WATCHPOINTS
-       bool
-       default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
+	bool
+	default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
 
 menu "Kernel type"
 
@@ -2178,10 +2177,10 @@ config PAGE_SIZE_4KB
 	bool "4kB"
 	depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
 	help
-	 This option select the standard 4kB Linux page size.  On some
-	 R3000-family processors this is the only available page size.  Using
-	 4kB page size will minimize memory consumption and is therefore
-	 recommended for low memory systems.
+	  This option select the standard 4kB Linux page size.  On some
+	  R3000-family processors this is the only available page size.  Using
+	  4kB page size will minimize memory consumption and is therefore
+	  recommended for low memory systems.
 
 config PAGE_SIZE_8KB
 	bool "8kB"
@@ -2474,7 +2473,6 @@ config SB1_PASS_2_1_WORKAROUNDS
 	depends on CPU_SB1 && CPU_SB1_PASS_2
 	default y
 
-
 choice
 	prompt "SmartMIPS or microMIPS ASE support"
 
@@ -2682,16 +2680,16 @@ config RANDOMIZE_BASE
 	bool "Randomize the address of the kernel image"
 	depends on RELOCATABLE
 	---help---
-	   Randomizes the physical and virtual address at which the
-	   kernel image is loaded, as a security feature that
-	   deters exploit attempts relying on knowledge of the location
-	   of kernel internals.
+	  Randomizes the physical and virtual address at which the
+	  kernel image is loaded, as a security feature that
+	  deters exploit attempts relying on knowledge of the location
+	  of kernel internals.
 
-	   Entropy is generated using any coprocessor 0 registers available.
+	  Entropy is generated using any coprocessor 0 registers available.
 
-	   The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
+	  The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
 
-	   If unsure, say N.
+	  If unsure, say N.
 
 config RANDOMIZE_BASE_MAX_OFFSET
 	hex "Maximum kASLR offset" if EXPERT
@@ -2821,7 +2819,7 @@ choice
 	prompt "Timer frequency"
 	default HZ_250
 	help
-	 Allows the configuration of the timer frequency.
+	  Allows the configuration of the timer frequency.
 
 	config HZ_24
 		bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
@@ -3121,10 +3119,10 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15
 
 config ARCH_MMAP_RND_COMPAT_BITS_MIN
-       default 8
+	default 8
 
 config ARCH_MMAP_RND_COMPAT_BITS_MAX
-       default 15
+	default 15
 
 config I8253
 	bool

arch/mips/bcm47xx/Kconfig

@@ -15,9 +15,9 @@ config BCM47XX_SSB
 	select SSB_DRIVER_GPIO
 	default y
 	help
-	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
+	  Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
 
-	 This will generate an image with support for SSB and MIPS32 R1 instruction set.
+	  This will generate an image with support for SSB and MIPS32 R1 instruction set.
 
 config BCM47XX_BCMA
 	bool "BCMA Support for Broadcom BCM47XX"
@@ -31,8 +31,8 @@ config BCM47XX_BCMA
 	select BCMA_DRIVER_GPIO
 	default y
 	help
-	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
+	  Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
 
-	 This will generate an image with support for BCMA and MIPS32 R2 instruction set.
+	  This will generate an image with support for BCMA and MIPS32 R2 instruction set.
 
 endif

arch/mips/bcm63xx/boards/Kconfig

@@ -5,7 +5,7 @@ choice
 	default BOARD_BCM963XX
 
 config BOARD_BCM963XX
-       bool "Generic Broadcom 963xx boards"
+	bool "Generic Broadcom 963xx boards"
 	select SSB
 
 endchoice

arch/mips/configs/generic_defconfig

@@ -26,6 +26,7 @@ CONFIG_MIPS_CPS=y
 CONFIG_HIGHMEM=y
 CONFIG_NR_CPUS=16
 CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_TRIM_UNUSED_KSYMS=y

arch/mips/include/asm/bootinfo.h

@@ -92,6 +92,7 @@ extern unsigned long mips_machtype;
 #define BOOT_MEM_ROM_DATA	2
 #define BOOT_MEM_RESERVED	3
 #define BOOT_MEM_INIT_RAM	4
+#define BOOT_MEM_NOMAP		5
 
 /*
  * A memory map that's built upon what was determined

arch/mips/include/asm/jump_label.h

@@ -11,6 +11,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <asm/isa-rev.h>
 
 #define JUMP_LABEL_NOP_SIZE 4
 
@@ -21,15 +22,20 @@
 #endif
 
 #ifdef CONFIG_CPU_MICROMIPS
-#define B_INSN "b32"
+# define B_INSN "b32"
+# define J_INSN "j32"
+#elif MIPS_ISA_REV >= 6
+# define B_INSN "bc"
+# define J_INSN "bc"
 #else
-#define B_INSN "b"
+# define B_INSN "b"
+# define J_INSN "j"
 #endif
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
 	asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
-		"2:\tnop\n\t"
+		"2:\t.insn\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"
@@ -42,8 +48,7 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\tj %l[l_yes]\n\t"
-		"nop\n\t"
+	asm_volatile_goto("1:\t" J_INSN " %l[l_yes]\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"

arch/mips/include/asm/uasm.h

@@ -86,14 +86,18 @@ Ip_u2u1(_ctcmsa);
 Ip_u2u1s3(_daddiu);
 Ip_u3u1u2(_daddu);
 Ip_u1u2(_ddivu);
+Ip_u3u1u2(_ddivu_r6);
 Ip_u1(_di);
 Ip_u2u1msbu3(_dins);
 Ip_u2u1msbu3(_dinsm);
 Ip_u2u1msbu3(_dinsu);
 Ip_u1u2(_divu);
+Ip_u3u1u2(_divu_r6);
 Ip_u1u2u3(_dmfc0);
+Ip_u3u1u2(_dmodu);
 Ip_u1u2u3(_dmtc0);
 Ip_u1u2(_dmultu);
+Ip_u3u1u2(_dmulu);
 Ip_u2u1u3(_drotr);
 Ip_u2u1u3(_drotr32);
 Ip_u2u1(_dsbh);
@@ -131,6 +135,7 @@ Ip_u1u2u3(_mfc0);
 Ip_u1u2u3(_mfhc0);
 Ip_u1(_mfhi);
 Ip_u1(_mflo);
+Ip_u3u1u2(_modu);
 Ip_u3u1u2(_movn);
 Ip_u3u1u2(_movz);
 Ip_u1u2u3(_mtc0);
@@ -139,6 +144,7 @@ Ip_u1(_mthi);
 Ip_u1(_mtlo);
 Ip_u3u1u2(_mul);
 Ip_u1u2(_multu);
+Ip_u3u1u2(_mulu);
 Ip_u3u1u2(_nor);
 Ip_u3u1u2(_or);
 Ip_u2u1u3(_ori);
@@ -149,6 +155,8 @@ Ip_u2s3u1(_sb);
 Ip_u2s3u1(_sc);
 Ip_u2s3u1(_scd);
 Ip_u2s3u1(_sd);
+Ip_u3u1u2(_seleqz);
+Ip_u3u1u2(_selnez);
 Ip_u2s3u1(_sh);
 Ip_u2u1u3(_sll);
 Ip_u3u2u1(_sllv);

arch/mips/include/uapi/asm/inst.h

@@ -55,9 +55,9 @@ enum spec_op {
 	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
 	dadd_op, daddu_op, dsub_op, dsubu_op,
 	tge_op, tgeu_op, tlt_op, tltu_op,
-	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
-	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
-	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+	teq_op, seleqz_op, tne_op, selnez_op,
+	dsll_op, spec5_unused_op, dsrl_op, dsra_op,
+	dsll32_op, spec6_unused_op, dsrl32_op, dsra32_op
 };
 
 /*

arch/mips/kernel/entry.S

@@ -58,15 +58,14 @@ resume_kernel:
 	local_irq_disable
 	lw	t0, TI_PRE_COUNT($28)
 	bnez	t0, restore_all
-need_resched:
 	LONG_L	t0, TI_FLAGS($28)
 	andi	t1, t0, _TIF_NEED_RESCHED
 	beqz	t1, restore_all
 	LONG_L	t0, PT_STATUS(sp)		# Interrupts off?
 	andi	t0, 1
 	beqz	t0, restore_all
-	jal	preempt_schedule_irq
-	b	need_resched
+	PTR_LA	ra, restore_all
+	j	preempt_schedule_irq
 #endif
 
 FEXPORT(ret_from_kernel_thread)

arch/mips/kernel/jump_label.c

@@ -40,18 +40,38 @@ void arch_jump_label_transform(struct jump_entry *e,
 {
 	union mips_instruction *insn_p;
 	union mips_instruction insn;
+	long offset;
 
 	insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
 
-	/* Jump only works within an aligned region its delay slot is in. */
-	BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
-
 	/* Target must have the right alignment and ISA must be preserved. */
 	BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
 
 	if (type == JUMP_LABEL_JMP) {
-		insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
-		insn.j_format.target = e->target >> J_RANGE_SHIFT;
+		if (!IS_ENABLED(CONFIG_CPU_MICROMIPS) && MIPS_ISA_REV >= 6) {
+			offset = e->target - ((unsigned long)insn_p + 4);
+			offset >>= 2;
+
+			/*
+			 * The branch offset must fit in the instruction's 26
+			 * bit field.
+			 */
+			WARN_ON((offset >= BIT(25)) ||
+				(offset < -(long)BIT(25)));
+
+			insn.j_format.opcode = bc6_op;
+			insn.j_format.target = offset;
+		} else {
+			/*
+			 * Jump only works within an aligned region its delay
+			 * slot is in.
+			 */
+			WARN_ON((e->target & ~J_RANGE_MASK) !=
+				((e->code + 4) & ~J_RANGE_MASK));
+
+			insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
+			insn.j_format.target = e->target >> J_RANGE_SHIFT;
+		}
 	} else {
 		insn.word = 0; /* nop */
 	}