Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...

Documentation/arm/Samsung/Bootloader-interface.txt

@@ -26,6 +26,7 @@ Offset        Value                                        Purpose
 0x20          0xfcba0d10 (Magic cookie)                    AFTR
 0x24          exynos_cpu_resume_ns                         AFTR
 0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
+0x28          0x0 or last value during resume (Exynos542x) System suspend
 
 
 2. Secure mode

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -57,12 +57,17 @@ Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,a113d", "amlogic,meson-axg";
 
+Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,g12a";
+
 Board compatible values (alphabetically, grouped by SoC):
 
   - "geniatech,atv1200" (Meson6)
 
   - "minix,neo-x8" (Meson8)
 
+  - "endless,ec100" (Meson8b)
   - "hardkernel,odroid-c1" (Meson8b)
   - "tronfy,mxq" (Meson8b)
 
@@ -101,6 +106,8 @@ Board compatible values (alphabetically, grouped by SoC):
 
   - "amlogic,s400" (Meson axg a113d)
 
+  - "amlogic,u200" (Meson g12a s905d2)
+
 Amlogic Meson Firmware registers Interface
 ------------------------------------------
 

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -42,6 +42,14 @@ Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";
 
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
 Raspberry Pi Zero
 Required root node properties:
 compatible = "raspberrypi,model-zero", "brcm,bcm2835";

Documentation/devicetree/bindings/arm/fsl.txt

@@ -57,6 +57,50 @@ i.MX6SLL EVK board
 Required root node properties:
     - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
 
+i.MX6 Quad Plus SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+
+i.MX6 Quad Plus SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+
+i.MX6 DualLite SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+
+i.MX6 DualLite/Solo SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+
+i.MX6 SoloLite EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+i.MX6 UltraLite 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+i.MX6 UltraLiteLite 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+i.MX6 SoloX SDB Board
+Required root node properties:
+    - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+i.MX6 SoloX Sabre Auto Board
+Required root node properties:
+    - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+i.MX7 SabreSD Board
+Required root node properties:
+    - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
 Generic i.MX boards
 -------------------
 

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -8,6 +8,14 @@ HiKey960 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
 
+Hi3670 SoC
+Required root node properties:
+	- compatible = "hisilicon,hi3670";
+
+HiKey970 Board
+Required root node properties:
+	- compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
 Hi3798cv200 SoC
 Required root node properties:
 	- compatible = "hisilicon,hi3798cv200";

Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt

@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2712-apmixedsys", "syscon"
 	- "mediatek,mt6797-apmixedsys"
 	- "mediatek,mt7622-apmixedsys"
+	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8173-apmixedsys"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-audsys", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
+	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
 - #clock-cells: Must be 1
 
 The AUDSYS controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-bdpsys", "syscon"
 	- "mediatek,mt2712-bdpsys", "syscon"
+	- "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
 - #clock-cells: Must be 1
 
 The bdpsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7622-ethsys", "syscon"
+	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-hifsys", "syscon"
 	- "mediatek,mt7622-hifsys", "syscon"
+	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
 - #clock-cells: Must be 1
 
 The hifsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt2712-imgsys", "syscon"
 	- "mediatek,mt6797-imgsys", "syscon"
+	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
 - #clock-cells: Must be 1
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt

@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt2712-infracfg", "syscon"
 	- "mediatek,mt6797-infracfg", "syscon"
 	- "mediatek,mt7622-infracfg", "syscon"
+	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt2712-mmsys", "syscon"
 	- "mediatek,mt6797-mmsys", "syscon"
+	- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt8173-mmsys", "syscon"
 - #clock-cells: Must be 1
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt

@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt2712-pericfg", "syscon"
 	- "mediatek,mt7622-pericfg", "syscon"
+	- "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt8135-pericfg", "syscon"
 	- "mediatek,mt8173-pericfg", "syscon"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt

@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2712-topckgen", "syscon"
 	- "mediatek,mt6797-topckgen"
 	- "mediatek,mt7622-topckgen"
+	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8173-topckgen"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt2712-vdecsys", "syscon"
 	- "mediatek,mt6797-vdecsys", "syscon"
+	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
 - #clock-cells: Must be 1
 

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -5,6 +5,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "vamrs,ficus", "rockchip,rk3399";
 
+- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+    Required root node properties:
+      - compatible = "vamrs,rock960", "rockchip,rk3399";
+
 - Amarula Vyasa RK3288 board
     Required root node properties:
       - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
@@ -13,6 +17,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
+- Asus Tinker board S
+    Required root node properties:
+      - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
 - Kylin RK3036 board:
     Required root node properties:
       - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
@@ -59,6 +67,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
+- Firefly ROC-RK3399-PC board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@@ -160,6 +172,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
     - compatible = "pine64,rock64", "rockchip,rk3328";
 
+- Pine64 RockPro64 board:
+    Required root node properties:
+    - compatible = "pine64,rockpro64", "rockchip,rk3399";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
@@ -168,6 +184,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
+- Rockchip PX30 Evaluation board:
+    Required root node properties:
+      - compatible = "rockchip,px30-evb", "rockchip,px30";
+
 - Rockchip RV1108 Evaluation board
     Required root node properties:
       - compatible = "rockchip,rv1108-evb", "rockchip,rv1108";

Documentation/devicetree/bindings/arm/scu.txt

@@ -22,7 +22,7 @@ References:
 
 Example:
 
-scu@a04100000 {
+scu@a0410000 {
 	compatible = "arm,cortex-a9-scu";
 	reg = <0xa0410000 0x100>;
 };

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -7,6 +7,8 @@ SoCs:
     compatible = "renesas,emev2"
   - RZ/A1H (R7S72100)
     compatible = "renesas,r7s72100"
+  - RZ/A2 (R7S9210)
+    compatible = "renesas,r7s9210"
   - SH-Mobile AG5 (R8A73A00/SH73A0)
     compatible = "renesas,sh73a0"
   - R-Mobile APE6 (R8A73A40)
@@ -23,6 +25,10 @@ SoCs:
     compatible = "renesas,r8a7745"
   - RZ/G1C (R8A77470)
     compatible = "renesas,r8a77470"
+  - RZ/G2M (R8A774A1)
+    compatible = "renesas,r8a774a1"
+  - RZ/G2E (RA8774C0)
+    compatible = "renesas,r8a774c0"
   - R-Car M1A (R8A77781)
     compatible = "renesas,r8a7778"
   - R-Car H1 (R8A77790)
@@ -107,6 +113,8 @@ Boards:
     compatible = "renesas,lager", "renesas,r8a7790"
   - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
     compatible = "renesas,m3ulcb", "renesas,r8a7796"
+  - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+    compatible = "renesas,m3nulcb", "renesas,r8a77965"
   - Marzen (R0P7779A00010S)
     compatible = "renesas,marzen", "renesas,r8a7779"
   - Porter (M2-LCDP)
@@ -143,12 +151,12 @@ Boards:
     compatible = "renesas,wheat", "renesas,r8a7792"
 
 
-Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
-product and revision information.  If present, a device node for this register
-should be added.
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information.  If present, a device
+node for this register should be added.
 
 Required properties:
-  - compatible: Must be "renesas,prr".
+  - compatible: Must be "renesas,prr" or "renesas,bsid"
   - reg: Base address and length of the register block.
 
 

Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt → Documentation/devicetree/bindings/arm/syna.txt

@@ -1,4 +1,9 @@
-Marvell Berlin SoC Family Device Tree Bindings
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
 ---------------------------------------------------------------
 
 Work in progress statement:
@@ -13,6 +18,10 @@ stable binding/ABI.
 
 ---------------------------------------------------------------
 
+Boards with the Synaptics AS370 SoC shall have the following properties:
+  Required root node property:
+    compatible: "syna,as370"
+
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 

Documentation/devicetree/bindings/arm/tegra.txt

@@ -47,12 +47,17 @@ board-specific compatible values:
   nvidia,ventana
   toradex,apalis_t30
   toradex,apalis_t30-eval
+  toradex,apalis_t30-v1.1
+  toradex,apalis_t30-v1.1-eval
   toradex,apalis-tk1
   toradex,apalis-tk1-eval
-  toradex,colibri_t20-512
+  toradex,apalis-tk1-v1.2
+  toradex,apalis-tk1-v1.2-eval
+  toradex,colibri_t20
+  toradex,colibri_t20-eval-v3
+  toradex,colibri_t20-iris
   toradex,colibri_t30
   toradex,colibri_t30-eval-v3
-  toradex,iris
 
 Trusted Foundations
 -------------------------------------------