Merge branch 'akpm-current/current'

Documentation/ABI/testing/sysfs-kernel-mm-numa

@@ -0,0 +1,24 @@
+What:		/sys/kernel/mm/numa/
+Date:		June 2021
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for NUMA
+
+What:		/sys/kernel/mm/numa/demotion_enabled
+Date:		June 2021
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Enable/disable demoting pages during reclaim
+
+		Page migration during reclaim is intended for systems
+		with tiered memory configurations.  These systems have
+		multiple types of memory with varied performance
+		characteristics instead of plain NUMA systems where
+		the same kind of memory is found at varied distances.
+		Allowing page migration during reclaim enables these
+		systems to migrate pages from fast tiers to slow tiers
+		when the fast tier is under pressure.  This migration
+		is performed before swap.  It may move data to a NUMA
+		node that does not fall into the cpuset of the
+		allocating process which might be construed to violate
+		the guarantees of cpusets.  This should not be enabled
+		on systems which need strict cpuset location
+		guarantees.

Documentation/admin-guide/mm/damon/index.rst

@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Monitoring Data Accesses
+========================
+
+:doc:`DAMON </vm/damon/index>` allows light-weight data access monitoring.
+Using DAMON, users can analyze the memory access patterns of their systems and
+optimize those.
+
+.. toctree::
+   :maxdepth: 2
+
+   start
+   usage

Documentation/admin-guide/mm/damon/start.rst

@@ -0,0 +1,114 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Getting Started
+===============
+
+This document briefly describes how you can use DAMON by demonstrating its
+default user space tool.  Please note that this document describes only a part
+of its features for brevity.  Please refer to :doc:`usage` for more details.
+
+
+TL; DR
+======
+
+Follow the commands below to monitor and visualize the memory access pattern of
+your workload. ::
+
+    # # build the kernel with CONFIG_DAMON_*=y, install it, and reboot
+    # mount -t debugfs none /sys/kernel/debug/
+    # git clone https://github.com/awslabs/damo
+    # ./damo/damo record $(pidof <your workload>)
+    # ./damo/damo report heat --plot_ascii
+
+The final command draws the access heatmap of ``<your workload>``.  The heatmap
+shows which memory region (x-axis) is accessed when (y-axis) and how frequently
+(number; the higher the more accesses have been observed). ::
+
+    111111111111111111111111111111111111111111111111111111110000
+    111121111111111111111111111111211111111111111111111111110000
+    000000000000000000000000000000000000000000000000001555552000
+    000000000000000000000000000000000000000000000222223555552000
+    000000000000000000000000000000000000000011111677775000000000
+    000000000000000000000000000000000000000488888000000000000000
+    000000000000000000000000000000000177888400000000000000000000
+    000000000000000000000000000046666522222100000000000000000000
+    000000000000000000000014444344444300000000000000000000000000
+    000000000000000002222245555510000000000000000000000000000000
+    # access_frequency:  0  1  2  3  4  5  6  7  8  9
+    # x-axis: space (140286319947776-140286426374096: 101.496 MiB)
+    # y-axis: time (605442256436361-605479951866441: 37.695430s)
+    # resolution: 60x10 (1.692 MiB and 3.770s for each character)
+
+
+Prerequisites
+=============
+
+Kernel
+------
+
+You should first ensure your system is running on a kernel built with
+``CONFIG_DAMON_*=y``.
+
+
+User Space Tool
+---------------
+
+For the demonstration, we will use the default user space tool for DAMON,
+called DAMON Operator (DAMO).  It is available at
+https://github.com/awslabs/damo.  The examples below assume that ``damo`` is on
+your ``$PATH``.  It's not mandatory, though.
+
+Because DAMO is using the debugfs interface (refer to :doc:`usage` for the
+detail) of DAMON, you should ensure debugfs is mounted.  Mount it manually as
+below::
+
+    # mount -t debugfs none /sys/kernel/debug/
+
+or append the following line to your ``/etc/fstab`` file so that your system
+can automatically mount debugfs upon booting::
+
+    debugfs /sys/kernel/debug debugfs defaults 0 0
+
+
+Recording Data Access Patterns
+==============================
+
+The commands below record the memory access patterns of a program and save the
+monitoring results to a file. ::
+
+    $ git clone https://github.com/sjp38/masim
+    $ cd masim; make; ./masim ./configs/zigzag.cfg &
+    $ sudo damo record -o damon.data $(pidof masim)
+
+The first two lines of the commands download an artificial memory access
+generator program and run it in the background.  The generator will repeatedly
+access two 100 MiB sized memory regions one by one.  You can substitute this
+with your real workload.  The last line asks ``damo`` to record the access
+pattern in the ``damon.data`` file.
+
+
+Visualizing Recorded Patterns
+=============================
+
+The following three commands visualize the recorded access patterns and save
+the results as separate image files. ::
+
+    $ damo report heats --heatmap access_pattern_heatmap.png
+    $ damo report wss --range 0 101 1 --plot wss_dist.png
+    $ damo report wss --range 0 101 1 --sortby time --plot wss_chron_change.png
+
+- ``access_pattern_heatmap.png`` will visualize the data access pattern in a
+  heatmap, showing which memory region (y-axis) got accessed when (x-axis)
+  and how frequently (color).
+- ``wss_dist.png`` will show the distribution of the working set size.
+- ``wss_chron_change.png`` will show how the working set size has
+  chronologically changed.
+
+You can view the visualizations of this example workload at [1]_.
+Visualizations of other realistic workloads are available at [2]_ [3]_ [4]_.
+
+.. [1] https://damonitor.github.io/doc/html/v17/admin-guide/mm/damon/start.html#visualizing-recorded-patterns
+.. [2] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html
+.. [3] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html
+.. [4] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html

Documentation/admin-guide/mm/damon/usage.rst

@@ -0,0 +1,112 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Detailed Usages
+===============
+
+DAMON provides below three interfaces for different users.
+
+- *DAMON user space tool.*
+  This is for privileged people such as system administrators who want a
+  just-working human-friendly interface.  Using this, users can use the DAMON’s
+  major features in a human-friendly way.  It may not be highly tuned for
+  special cases, though.  It supports only virtual address spaces monitoring.
+- *debugfs interface.*
+  This is for privileged user space programmers who want more optimized use of
+  DAMON.  Using this, users can use DAMON’s major features by reading
+  from and writing to special debugfs files.  Therefore, you can write and use
+  your personalized DAMON debugfs wrapper programs that reads/writes the
+  debugfs files instead of you.  The DAMON user space tool is also a reference
+  implementation of such programs.  It supports only virtual address spaces
+  monitoring.
+- *Kernel Space Programming Interface.*
+  This is for kernel space programmers.  Using this, users can utilize every
+  feature of DAMON most flexibly and efficiently by writing kernel space
+  DAMON application programs for you.  You can even extend DAMON for various
+  address spaces.
+
+Nevertheless, you could write your own user space tool using the debugfs
+interface.  A reference implementation is available at
+https://github.com/awslabs/damo.  If you are a kernel programmer, you could
+refer to :doc:`/vm/damon/api` for the kernel space programming interface.  For
+the reason, this document describes only the debugfs interface
+
+debugfs Interface
+=================
+
+DAMON exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under
+its debugfs directory, ``<debugfs>/damon/``.
+
+
+Attributes
+----------
+
+Users can get and set the ``sampling interval``, ``aggregation interval``,
+``regions update interval``, and min/max number of monitoring target regions by
+reading from and writing to the ``attrs`` file.  To know about the monitoring
+attributes in detail, please refer to the :doc:`/vm/damon/design`.  For
+example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10 and
+1000, and then check it again::
+
+    # cd <debugfs>/damon
+    # echo 5000 100000 1000000 10 1000 > attrs
+    # cat attrs
+    5000 100000 1000000 10 1000
+
+
+Target IDs
+----------
+
+Some types of address spaces supports multiple monitoring target.  For example,
+the virtual memory address spaces monitoring can have multiple processes as the
+monitoring targets.  Users can set the targets by writing relevant id values of
+the targets to, and get the ids of the current targets by reading from the
+``target_ids`` file.  In case of the virtual address spaces monitoring, the
+values should be pids of the monitoring target processes.  For example, below
+commands set processes having pids 42 and 4242 as the monitoring targets and
+check it again::
+
+    # cd <debugfs>/damon
+    # echo 42 4242 > target_ids
+    # cat target_ids
+    42 4242
+
+Note that setting the target ids doesn't start the monitoring.
+
+
+Turning On/Off
+--------------
+
+Setting the files as described above doesn't incur effect unless you explicitly
+start the monitoring.  You can start, stop, and check the current status of the
+monitoring by writing to and reading from the ``monitor_on`` file.  Writing
+``on`` to the file starts the monitoring of the targets with the attributes.
+Writing ``off`` to the file stops those.  DAMON also stops if every target
+process is terminated.  Below example commands turn on, off, and check the
+status of DAMON::
+
+    # cd <debugfs>/damon
+    # echo on > monitor_on
+    # echo off > monitor_on
+    # cat monitor_on
+    off
+
+Please note that you cannot write to the above-mentioned debugfs files while
+the monitoring is turned on.  If you write to the files while DAMON is running,
+an error code such as ``-EBUSY`` will be returned.
+
+
+Tracepoint for Monitoring Results
+=================================
+
+DAMON provides the monitoring results via a tracepoint,
+``damon:damon_aggregated``.  While the monitoring is turned on, you could
+record the tracepoint events and show results using tracepoint supporting tools
+like ``perf``.  For example::
+
+    # echo on > monitor_on
+    # perf record -e damon:damon_aggregated &
+    # sleep 5
+    # kill 9 $(pidof perf)
+    # echo off > monitor_on
+    # perf script

Documentation/admin-guide/mm/index.rst

@@ -27,6 +27,7 @@ the Linux memory management.
 
    concepts
    cma_debugfs
+   damon/index
    hugetlbpage
    idle_page_tracking
    ksm