Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt

@@ -32,8 +32,8 @@ Example:
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

Documentation/devicetree/bindings/usb/renesas_usbhs.txt

@@ -15,10 +15,8 @@ Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
   - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : Must contain a list of DMA names:
-   - tx0 ... tx<n>
-   - rx0 ... rx<n>
-    - This <n> means DnFIFO in USBHS module.
+  - dma-names : named "ch%d", where %d is the channel number ranging from zero
+                to the number of channels (DnFIFOs) minus one.
 
 Example:
 	usbhs: usb@e6590000 {

MAINTAINERS

@@ -51,9 +51,9 @@ trivial patch so apply some common sense.
 	or does something very odd once a month document it.
 
 	PLEASE remember that submissions must be made under the terms
-	of the OSDL certificate of contribution and should include a
-	Signed-off-by: line.  The current version of this "Developer's
-	Certificate of Origin" (DCO) is listed in the file
+	of the Linux Foundation certificate of contribution and should
+	include a Signed-off-by: line.  The current version of this
+	"Developer's Certificate of Origin" (DCO) is listed in the file
 	Documentation/SubmittingPatches.
 
 6.	Make sure you have the right to send any changes you make. If you
@@ -7587,6 +7587,7 @@ F:	drivers/pci/host/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSIS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
+M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	drivers/pci/host/*designware*
@@ -7600,8 +7601,9 @@ F:	Documentation/devicetree/bindings/pci/host-generic-pci.txt
 F:	drivers/pci/host/pci-host-generic.c
 
 PCIE DRIVER FOR ST SPEAR13XX
+M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	drivers/pci/host/*spear*
 
 PCMCIA SUBSYSTEM

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -223,6 +223,25 @@
 /include/ "tps65217.dtsi"
 
 &tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";

arch/arm/boot/dts/am35xx-clocks.dtsi

@@ -12,55 +12,55 @@
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <1>;
 	};
 
 	emac_fck: emac_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <9>;
 	};
 
 	vpfe_ick: vpfe_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <2>;
 	};
 
 	vpfe_fck: vpfe_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <10>;
 	};
 
 	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <0>;
 	};
 
 	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <8>;
 	};
 
 	hecc_ck: hecc_ck {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <3>;
 	};
 };

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -95,6 +95,11 @@
 
 		internal-regs {
 
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
 			/* J10: VCC, NC, RX, NC, TX, GND  */
 			serial@12000 {
 				status = "okay";

arch/arm/boot/dts/dm816x.dtsi

@@ -382,7 +382,7 @@
 			ti,hwmods = "usb_otg_hs";
 
 			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401400 0x400
 				       0x47401000 0x200>;
 				reg-names = "mc", "control";
@@ -422,7 +422,7 @@
 			};
 
 			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";

arch/arm/boot/dts/omap3-n900.dts

@@ -832,8 +832,8 @@
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

arch/arm/mach-exynos/suspend.c

@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
 static u32 exynos_irqwake_intmask = 0xffffffff;
 
 static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
-	{ 105, BIT(1) }, /* RTC alarm */
-	{ 106, BIT(2) }, /* RTC tick */
+	{ 73, BIT(1) }, /* RTC alarm */
+	{ 74, BIT(2) }, /* RTC tick */
 	{ /* sentinel */ },
 };
 

arch/arm/mach-omap2/sleep34xx.S

@@ -203,23 +203,8 @@ save_context_wfi:
 	 */
 	ldr	r1, kernel_flush
 	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
 	b	omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
 omap3_do_wfi_sram_addr:
 	.word omap3_do_wfi_sram
 kernel_flush:
@@ -364,10 +349,7 @@ exit_nonoff_modes:
  * ===================================
  */
 	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
 sdrc_power:
 	.word	SDRC_POWER_V
 cm_idlest1_core:

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

@@ -16,7 +16,8 @@
 #include "mt8173.dtsi"
 
 / {
-	model = "mediatek,mt8173-evb";
+	model = "MediaTek MT8173 evaluation board";
+	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
 
 	aliases {
 		serial0 = &uart0;

arch/ia64/kernel/smpboot.c

@@ -127,7 +127,7 @@ int smp_num_siblings = 1;
 volatile int ia64_cpu_to_sapicid[NR_CPUS];
 EXPORT_SYMBOL(ia64_cpu_to_sapicid);
 
-static volatile cpumask_t cpu_callin_map;
+static cpumask_t cpu_callin_map;
 
 struct smp_boot_data smp_boot_data __initdata;
 
@@ -477,6 +477,7 @@ do_boot_cpu (int sapicid, int cpu, struct task_struct *idle)
 	for (timeout = 0; timeout < 100000; timeout++) {
 		if (cpumask_test_cpu(cpu, &cpu_callin_map))
 			break;  /* It has booted */
+		barrier(); /* Make sure we re-read cpu_callin_map */
 		udelay(100);
 	}
 	Dprintk("\n");

arch/mips/ath79/setup.c

@@ -225,7 +225,7 @@ void __init plat_time_init(void)
 	ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
 	ref_clk_rate = ath79_get_sys_clk_rate("ref");
 
-	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz",
+	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
 		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
 		ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
 		ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,

arch/mips/kernel/cpu-probe.c

@@ -74,13 +74,12 @@ static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
 {
 	unsigned long sr, mask, fcsr, fcsr0, fcsr1;
 
+	fcsr = c->fpu_csr31;
 	mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
 
 	sr = read_c0_status();
 	__enable_fpu(FPU_AS_IS);
 
-	fcsr = read_32bit_cp1_register(CP1_STATUS);
-
 	fcsr0 = fcsr & mask;
 	write_32bit_cp1_register(CP1_STATUS, fcsr0);
 	fcsr0 = read_32bit_cp1_register(CP1_STATUS);

arch/mips/kernel/irq.c

@@ -109,7 +109,7 @@ void __init init_IRQ(void)
 #endif
 }
 
-#ifdef DEBUG_STACKOVERFLOW
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
 static inline void check_stack_overflow(void)
 {
 	unsigned long sp;

arch/mips/kvm/emulate.c

@@ -2409,7 +2409,7 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
 		if (vcpu->mmio_needed == 2)
 			*gpr = *(int16_t *) run->mmio.data;
 		else
-			*gpr = *(int16_t *) run->mmio.data;
+			*gpr = *(uint16_t *)run->mmio.data;
 
 		break;
 	case 1:

arch/mips/loongson/loongson-3/smp.c

@@ -272,7 +272,7 @@ void loongson3_ipi_interrupt(struct pt_regs *regs)
 	if (action & SMP_ASK_C0COUNT) {
 		BUG_ON(cpu != 0);
 		c0count = read_c0_count();
-		for (i = 1; i < loongson_sysconf.nr_cpus; i++)
+		for (i = 1; i < num_possible_cpus(); i++)
 			per_cpu(core0_c0count, i) = c0count;
 	}
 }

arch/mips/mm/c-r4k.c

@@ -1372,7 +1372,7 @@ static int probe_scache(void)
 	scache_size = addr;
 	c->scache.linesz = 16 << ((config & R4K_CONF_SB) >> 22);
 	c->scache.ways = 1;
-	c->dcache.waybit = 0;		/* does not matter */
+	c->scache.waybit = 0;		/* does not matter */
 
 	return 1;
 }

arch/mips/net/bpf_jit.c

@@ -681,11 +681,7 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx)
 		sp_off += config_enabled(CONFIG_64BIT) ?
 			(ARGS_USED_BY_JIT + 1) * RSIZE : RSIZE;
 
-	/*
-	 * Subtract the bytes for the last registers since we only care about
-	 * the location on the stack pointer.
-	 */
-	return sp_off - RSIZE;
+	return sp_off;
 }
 
 static void build_prologue(struct jit_ctx *ctx)

arch/mips/ralink/ill_acc.c

@@ -41,7 +41,7 @@ static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
 		addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
 		type & ILL_ACC_LEN_M);
 
-	rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+	rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
 
 	return IRQ_HANDLED;
 }

arch/s390/net/bpf_jit.h

@@ -48,7 +48,9 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
  * We get 160 bytes stack space from calling function, but only use
  * 11 * 8 byte (old backchain + r15 - r6) for storing registers.
  */
-#define STK_OFF (MAX_BPF_STACK + 8 + 4 + 4 + (160 - 11 * 8))
+#define STK_SPACE	(MAX_BPF_STACK + 8 + 4 + 4 + 160)
+#define STK_160_UNUSED	(160 - 11 * 8)
+#define STK_OFF		(STK_SPACE - STK_160_UNUSED)
 #define STK_OFF_TMP	160	/* Offset of tmp buffer on stack */
 #define STK_OFF_HLEN	168	/* Offset of SKB header length on stack */
 

arch/s390/net/bpf_jit_comp.c

@@ -384,13 +384,16 @@ static void bpf_jit_prologue(struct bpf_jit *jit)
 	}
 	/* Setup stack and backchain */
 	if (jit->seen & SEEN_STACK) {
-		/* lgr %bfp,%r15 (BPF frame pointer) */
-		EMIT4(0xb9040000, BPF_REG_FP, REG_15);
+		if (jit->seen & SEEN_FUNC)
+			/* lgr %w1,%r15 (backchain) */
+			EMIT4(0xb9040000, REG_W1, REG_15);
+		/* la %bfp,STK_160_UNUSED(%r15) (BPF frame pointer) */
+		EMIT4_DISP(0x41000000, BPF_REG_FP, REG_15, STK_160_UNUSED);
 		/* aghi %r15,-STK_OFF */
 		EMIT4_IMM(0xa70b0000, REG_15, -STK_OFF);
 		if (jit->seen & SEEN_FUNC)
-			/* stg %bfp,152(%r15) (backchain) */
-			EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_FP, REG_0,
+			/* stg %w1,152(%r15) (backchain) */
+			EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0,
 				      REG_15, 152);
 	}
 	/*