Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…jkirsher/next-queue

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2016-04-06

This series contains updates to e1000, e1000e, igb and Kconfig.

Alex fixes igb where we were casting the MAC address as __beXX and then
passing it into le32_to_cpu, when we could simply cast as __lexx to
maintain consistency since it is already little endian.  Then enabled
bulk free in transmit cleanup for igb.

John Holland enables igb to pickup the MAC address from a device tree
blob when CONFIG_OF has been enabled.

Doron Shikmoni fixes a bug in the output of "ethtool -m ethX" where
the data byte appeared duplicated.

Stefan fixes up e1000 and e1000e ethtool offline tests which were calling
dev_close() which causes IFF_UP to be cleared which removes teh interface
routes and some addresses, so use ndo_stop() instead.

Jiri Benc cleans up some old links in the Kconfig for Intel drivers where
we referred to a URL which is no longer valid.  I am so glad Jiri has the
time in his day to spend clicking on and testing all the URL links in the
the kernel.

Arika Chen reverts the addition of a 'rtnl_unlock()' which had a unmatched
'rtnl_lock()' call before it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/Kconfig

@@ -25,16 +25,13 @@ config E100
 	  on the adapter. Look for a label that has a barcode and a number
 	  in the format 123456-001 (six digits hyphen three digits).
 
-	  Use the above information and the Adapter & Driver ID Guide at:
+	  Use the above information and the Adapter & Driver ID Guide that
+	  can be located at:
 
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+	  <http://support.intel.com>
 
 	  to identify the adapter.
 
-	  For the latest Intel PRO/100 network driver for Linux, see:
-
-	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e100.txt>.
 
@@ -47,12 +44,7 @@ config E1000
 	---help---
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -71,12 +63,8 @@ config E1000E
 	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
 	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
 	  use the regular e1000 driver For more information on how to
-	  identify your adapter, go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  identify your adapter, go to the Adapter & Driver ID Guide that
+	  can be located at:
 
 	  <http://support.intel.com>
 
@@ -101,12 +89,7 @@ config IGB
 	---help---
 	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -142,12 +125,7 @@ config IGBVF
 	---help---
 	  This driver supports Intel(R) 82576 virtual functions.  For more
 	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -164,12 +142,7 @@ config IXGB
 	  This driver supports Intel(R) PRO/10GbE family of adapters for
 	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
 	  instead. For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -187,12 +160,7 @@ config IXGBE
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -243,12 +211,7 @@ config IXGBEVF
 	---help---
 	  This driver supports Intel(R) PCI Express virtual functions for the
 	  Intel(R) ixgbe driver.  For more information on how to identify your
-	  adapter, go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/sb/CS-008441.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  adapter, go to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -266,12 +229,7 @@ config I40E
 	---help---
 	  This driver supports Intel(R) Ethernet Controller XL710 Family of
 	  devices.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -326,12 +284,7 @@ config I40EVF
 	---help---
 	  This driver supports Intel(R) XL710 and X710 virtual functions.
 	  For more information on how to identify your adapter, go to the
-	  Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/sb/CS-008441.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 
@@ -347,12 +300,7 @@ config FM10K
 	---help---
 	  This driver supports Intel(R) FM10000 Ethernet Switch Host
 	  Interface.  For more information on how to identify your adapter,
-	  go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/sb/CS-008441.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
+	  go to the Adapter & Driver ID Guide that can be located at:
 
 	  <http://support.intel.com>
 

drivers/net/ethernet/intel/e1000/e1000.h

@@ -358,6 +358,8 @@ struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
 extern char e1000_driver_name[];
 extern const char e1000_driver_version[];
 
+int e1000_open(struct net_device *netdev);
+int e1000_close(struct net_device *netdev);
 int e1000_up(struct e1000_adapter *adapter);
 void e1000_down(struct e1000_adapter *adapter);
 void e1000_reinit_locked(struct e1000_adapter *adapter);

drivers/net/ethernet/intel/e1000/e1000_ethtool.c

@@ -1553,7 +1553,7 @@ static void e1000_diag_test(struct net_device *netdev,
 
 		if (if_running)
 			/* indicate we're in test mode */
-			dev_close(netdev);
+			e1000_close(netdev);
 		else
 			e1000_reset(adapter);
 
@@ -1582,7 +1582,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		e1000_reset(adapter);
 		clear_bit(__E1000_TESTING, &adapter->flags);
 		if (if_running)
-			dev_open(netdev);
+			e1000_open(netdev);
 	} else {
 		e_info(hw, "online testing starting\n");
 		/* Online tests */

drivers/net/ethernet/intel/e1000/e1000_main.c

@@ -114,8 +114,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void e1000_remove(struct pci_dev *pdev);
 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 static int e1000_sw_init(struct e1000_adapter *adapter);
-static int e1000_open(struct net_device *netdev);
-static int e1000_close(struct net_device *netdev);
+int e1000_open(struct net_device *netdev);
+int e1000_close(struct net_device *netdev);
 static void e1000_configure_tx(struct e1000_adapter *adapter);
 static void e1000_configure_rx(struct e1000_adapter *adapter);
 static void e1000_setup_rctl(struct e1000_adapter *adapter);
@@ -1360,7 +1360,7 @@ static int e1000_alloc_queues(struct e1000_adapter *adapter)
  * handler is registered with the OS, the watchdog task is started,
  * and the stack is notified that the interface is ready.
  **/
-static int e1000_open(struct net_device *netdev)
+int e1000_open(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -1437,7 +1437,7 @@ static int e1000_open(struct net_device *netdev)
  * needs to be disabled.  A global MAC reset is issued to stop the
  * hardware, and all transmit and receive resources are freed.
  **/
-static int e1000_close(struct net_device *netdev)
+int e1000_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -480,6 +480,8 @@ extern const char e1000e_driver_version[];
 void e1000e_check_options(struct e1000_adapter *adapter);
 void e1000e_set_ethtool_ops(struct net_device *netdev);
 
+int e1000e_open(struct net_device *netdev);
+int e1000e_close(struct net_device *netdev);
 void e1000e_up(struct e1000_adapter *adapter);
 void e1000e_down(struct e1000_adapter *adapter, bool reset);
 void e1000e_reinit_locked(struct e1000_adapter *adapter);

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -1816,7 +1816,7 @@ static void e1000_diag_test(struct net_device *netdev,
 
 		if (if_running)
 			/* indicate we're in test mode */
-			dev_close(netdev);
+			e1000e_close(netdev);
 
 		if (e1000_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1849,7 +1849,7 @@ static void e1000_diag_test(struct net_device *netdev,
 
 		clear_bit(__E1000_TESTING, &adapter->state);
 		if (if_running)
-			dev_open(netdev);
+			e1000e_open(netdev);
 	} else {
 		/* Online tests */
 

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -4495,7 +4495,7 @@ static int e1000_test_msi(struct e1000_adapter *adapter)
 }
 
 /**
- * e1000_open - Called when a network interface is made active
+ * e1000e_open - Called when a network interface is made active
  * @netdev: network interface device structure
  *
  * Returns 0 on success, negative value on failure
@@ -4506,7 +4506,7 @@ static int e1000_test_msi(struct e1000_adapter *adapter)
  * handler is registered with the OS, the watchdog timer is started,
  * and the stack is notified that the interface is ready.
  **/
-static int e1000_open(struct net_device *netdev)
+int e1000e_open(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -4604,7 +4604,7 @@ static int e1000_open(struct net_device *netdev)
 }
 
 /**
- * e1000_close - Disables a network interface
+ * e1000e_close - Disables a network interface
  * @netdev: network interface device structure
  *
  * Returns 0, this is not allowed to fail
@@ -4614,7 +4614,7 @@ static int e1000_open(struct net_device *netdev)
  * needs to be disabled.  A global MAC reset is issued to stop the
  * hardware, and all transmit and receive resources are freed.
  **/
-static int e1000_close(struct net_device *netdev)
+int e1000e_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct pci_dev *pdev = adapter->pdev;
@@ -6920,8 +6920,8 @@ static int e1000_set_features(struct net_device *netdev,
 }
 
 static const struct net_device_ops e1000e_netdev_ops = {
-	.ndo_open		= e1000_open,
-	.ndo_stop		= e1000_close,
+	.ndo_open		= e1000e_open,
+	.ndo_stop		= e1000e_close,
 	.ndo_start_xmit		= e1000_xmit_frame,
 	.ndo_get_stats64	= e1000e_get_stats64,
 	.ndo_set_rx_mode	= e1000e_set_rx_mode,

drivers/net/ethernet/intel/igb/igb_ethtool.c

@@ -2831,7 +2831,8 @@ static int igb_get_module_eeprom(struct net_device *netdev,
 
 	/* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
 	for (i = 0; i < last_word - first_word + 1; i++) {
-		status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
+		status = igb_read_phy_reg_i2c(hw, (first_word + i) * 2,
+					      &dataword[i]);
 		if (status) {
 			/* Error occurred while reading module */
 			kfree(dataword);

drivers/net/ethernet/intel/igb/igb_main.c

@@ -50,6 +50,7 @@
 #include <linux/aer.h>
 #include <linux/prefetch.h>
 #include <linux/pm_runtime.h>
+#include <linux/etherdevice.h>
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
@@ -150,7 +151,7 @@ static void igb_update_dca(struct igb_q_vector *);
 static void igb_setup_dca(struct igb_adapter *);
 #endif /* CONFIG_IGB_DCA */
 static int igb_poll(struct napi_struct *, int);
-static bool igb_clean_tx_irq(struct igb_q_vector *);
+static bool igb_clean_tx_irq(struct igb_q_vector *, int);
 static int igb_clean_rx_irq(struct igb_q_vector *, int);
 static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
 static void igb_tx_timeout(struct net_device *);
@@ -2442,9 +2443,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	/* copy the MAC address out of the NVM */
-	if (hw->mac.ops.read_mac_addr(hw))
-		dev_err(&pdev->dev, "NVM Read Error\n");
+	if (eth_platform_get_mac_address(&pdev->dev, hw->mac.addr)) {
+		/* copy the MAC address out of the NVM */
+		if (hw->mac.ops.read_mac_addr(hw))
+			dev_err(&pdev->dev, "NVM Read Error\n");
+	}
 
 	memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
 
@@ -6522,13 +6525,14 @@ static int igb_poll(struct napi_struct *napi, int budget)
 		igb_update_dca(q_vector);
 #endif
 	if (q_vector->tx.ring)
-		clean_complete = igb_clean_tx_irq(q_vector);
+		clean_complete = igb_clean_tx_irq(q_vector, budget);
 
 	if (q_vector->rx.ring) {
 		int cleaned = igb_clean_rx_irq(q_vector, budget);
 
 		work_done += cleaned;
-		clean_complete &= (cleaned < budget);
+		if (cleaned >= budget)
+			clean_complete = false;
 	}
 
 	/* If all work not completed, return budget and keep polling */
@@ -6545,10 +6549,11 @@ static int igb_poll(struct napi_struct *napi, int budget)
 /**
  *  igb_clean_tx_irq - Reclaim resources after transmit completes
  *  @q_vector: pointer to q_vector containing needed info
+ *  @napi_budget: Used to determine if we are in netpoll
  *
  *  returns true if ring is completely cleaned
  **/
-static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector, int napi_budget)
 {
 	struct igb_adapter *adapter = q_vector->adapter;
 	struct igb_ring *tx_ring = q_vector->tx.ring;
@@ -6587,7 +6592,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
 		total_packets += tx_buffer->gso_segs;
 
 		/* free the skb */
-		dev_consume_skb_any(tx_buffer->skb);
+		napi_consume_skb(tx_buffer->skb, napi_budget);
 
 		/* unmap skb header data */
 		dma_unmap_single(tx_ring->dev,
@@ -7574,7 +7579,6 @@ static int igb_resume(struct device *dev)
 
 	if (igb_init_interrupt_scheme(adapter, true)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
-		rtnl_unlock();
 		return -ENOMEM;
 	}
 
@@ -7845,11 +7849,13 @@ static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rar_low, rar_high;
 
-	/* HW expects these in little endian so we reverse the byte order
-	 * from network order (big endian) to CPU endian
+	/* HW expects these to be in network order when they are plugged
+	 * into the registers which are little endian.  In order to guarantee
+	 * that ordering we need to do an leXX_to_cpup here in order to be
+	 * ready for the byteswap that occurs with writel
 	 */
-	rar_low = le32_to_cpup((__be32 *)(addr));
-	rar_high = le16_to_cpup((__be16 *)(addr + 4));
+	rar_low = le32_to_cpup((__le32 *)(addr));
+	rar_high = le16_to_cpup((__le16 *)(addr + 4));
 
 	/* Indicate to hardware the Address is Valid. */
 	rar_high |= E1000_RAH_AV;