ARM: 9059/1: cache-v7: get rid of mini-stack

Now that we have reduced the number of registers that we need to
preserve when calling v7_invalidate_l1 from the boot code, we can use
scratch registers to preserve the remaining ones, and get rid of the
mini stack entirely. This works around any issues regarding cache
behavior in relation to the uncached accesses to this memory, which is
hard to get right in the general case (i.e., both bare metal and under
virtualization)

While at it, switch v7_invalidate_l1 to using ip as a scratch register
instead of r4. This makes the function AAPCS compliant, and removes the
need to stash r4 in ip across the call.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

arch/arm/include/asm/memory.h

@@ -150,21 +150,6 @@ extern unsigned long vectors_base;
  */
 #define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
 
-#ifdef CONFIG_XIP_KERNEL
-/*
- * When referencing data in RAM from the XIP region in a relative manner
- * with the MMU off, we need the relative offset between the two physical
- * addresses.  The macro below achieves this, which is:
- *    __pa(v_data) - __xip_pa(v_text)
- */
-#define PHYS_RELATIVE(v_data, v_text) \
-	(((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
-	 ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
-          CONFIG_XIP_PHYS_ADDR))
-#else
-#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
-#endif
-
 #ifndef __ASSEMBLY__
 
 /*

arch/arm/mm/cache-v7.S

@@ -53,12 +53,12 @@ ENTRY(v7_invalidate_l1)
 	and	r2, r0, #0x7
 	add	r2, r2, #4		@ SetShift
 
-1:	movw	r4, #0x7fff
-	and	r0, r4, r0, lsr #13	@ 'NumSets' in CCSIDR[27:13]
+1:	movw	ip, #0x7fff
+	and	r0, ip, r0, lsr #13	@ 'NumSets' in CCSIDR[27:13]
 
-2:	mov	r4, r0, lsl r2		@ NumSet << SetShift
-	orr	r4, r4, r3		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r4, c7, c6, 2
+2:	mov	ip, r0, lsl r2		@ NumSet << SetShift
+	orr	ip, ip, r3		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, ip, c7, c6, 2
 	subs	r0, r0, #1		@ Set--
 	bpl	2b
 	subs	r3, r3, r1		@ Way--

arch/arm/mm/proc-v7.S

@@ -256,6 +256,20 @@ ENDPROC(cpu_pj4b_do_resume)
 
 #endif
 
+	@
+	@ Invoke the v7_invalidate_l1() function, which adheres to the AAPCS
+	@ rules, and so it may corrupt registers that we need to preserve.
+	@
+	.macro	do_invalidate_l1
+	mov	r6, r1
+	mov	r7, r2
+	mov	r10, lr
+	bl	v7_invalidate_l1		@ corrupts {r0-r3, ip, lr}
+	mov	r1, r6
+	mov	r2, r7
+	mov	lr, r10
+	.endm
+
 /*
  *	__v7_setup
  *
@@ -277,20 +291,17 @@ __v7_ca5mp_setup:
 __v7_ca9mp_setup:
 __v7_cr7mp_setup:
 __v7_cr8mp_setup:
+	do_invalidate_l1
 	mov	r10, #(1 << 0)			@ Cache/TLB ops broadcasting
 	b	1f
 __v7_ca7mp_setup:
 __v7_ca12mp_setup:
 __v7_ca15mp_setup:
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
+	do_invalidate_l1
 	mov	r10, #0
-1:	adr	r0, __v7_setup_stack_ptr
-	ldr	r12, [r0]
-	add	r12, r12, r0			@ the local stack
-	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
-	bl      v7_invalidate_l1
-	ldmia	r12, {r1-r6, lr}
+1:
 #ifdef CONFIG_SMP
 	orr	r10, r10, #(1 << 6)		@ Enable SMP/nAMP mode
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
@@ -471,12 +482,7 @@ __v7_pj4b_setup:
 #endif /* CONFIG_CPU_PJ4B */
 
 __v7_setup:
-	adr	r0, __v7_setup_stack_ptr
-	ldr	r12, [r0]
-	add	r12, r12, r0			@ the local stack
-	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
-	bl      v7_invalidate_l1
-	ldmia	r12, {r1-r6, lr}
+	do_invalidate_l1
 
 __v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
@@ -548,17 +554,8 @@ __errata_finish:
 	orr	r0, r0, r6			@ set them
  THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	ret	lr				@ return to head.S:__ret
-
-	.align	2
-__v7_setup_stack_ptr:
-	.word	PHYS_RELATIVE(__v7_setup_stack, .)
 ENDPROC(__v7_setup)
 
-	.bss
-	.align	2
-__v7_setup_stack:
-	.space	4 * 7				@ 7 registers
-
 	__INITDATA
 
 	.weak cpu_v7_bugs_init