Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c
  ide-disk: set non-rotational queue flag for SSD and CF devices
  ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list
  ide: Add tx4938ide driver (v2)
  TXx9: Add TX4938 ATA support (v3)
  ide: Add tx4939ide driver (v6)
  ide: two more pci_ioremap_bar() conversions
  pci: use pci_ioremap_bar() in drivers/ide
  sgiioc4: use ide_host_add() (take 2)
  sgiioc4: fix error cleanup path (take 2)

arch/mips/include/asm/txx9/tx4938.h

@@ -292,4 +292,17 @@ void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 void tx4938_mtd_init(int ch);
 
+struct tx4938ide_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	unsigned int gbus_clock;	/*  0 means no PIO mode tuning. */
+	unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
 #endif

arch/mips/txx9/generic/setup_tx4938.c

@@ -16,6 +16,7 @@
 #include <linux/param.h>
 #include <linux/ptrace.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
 #include <asm/txx9irq.h>
@@ -335,6 +336,52 @@ void __init tx4938_mtd_init(int ch)
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			/* .start and .end are filled in later */
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		/*
+		 * The IDE driver should not change bus timings if other ISA
+		 * devices existed.
+		 */
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	u64 ebccr;
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+		if ((ebccr & 0x00f00008) == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+	res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+	res[0].end = res[0].start + 0x20000 - 1;
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
 static void __init tx4938_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;

arch/mips/txx9/rbtx4938/setup.c

@@ -352,6 +352,7 @@ static void __init rbtx4938_device_init(void)
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
 	rbtx4938_mtd_init();
+	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
 	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 

drivers/ide/Kconfig

@@ -720,6 +720,16 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        default "128"
        depends on BLK_DEV_IDE_AU1XXX
 
+config BLK_DEV_IDE_TX4938
+	tristate "TX4938 internal IDE support"
+	depends on SOC_TX4938
+	select IDE_TIMINGS
+
+config BLK_DEV_IDE_TX4939
+	tristate "TX4939 internal IDE support"
+	depends on SOC_TX4939
+	select BLK_DEV_IDEDMA_SFF
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)

drivers/ide/Makefile

@@ -68,7 +68,6 @@ obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o
 
 # Must appear at the end of the block
 obj-$(CONFIG_BLK_DEV_GENERIC)		+= ide-pci-generic.o
-ide-pci-generic-y			+= generic.o
 
 obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
 
@@ -111,3 +110,6 @@ obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
 obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
 
 obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
+
+obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
+obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o

drivers/ide/ide-cd.c

@@ -1966,6 +1966,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
 	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7543A", NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
+	{ "TEAC CD-ROM CD-224E",     NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
 	{ NULL, NULL, 0 }
 };
 

drivers/ide/ide-disk.c

@@ -600,6 +600,7 @@ static int ide_disk_check(ide_drive_t *drive, const char *s)
 static void ide_disk_setup(ide_drive_t *drive)
 {
 	struct ide_disk_obj *idkp = drive->driver_data;
+	struct request_queue *q = drive->queue;
 	ide_hwif_t *hwif = drive->hwif;
 	u16 *id = drive->id;
 	char *m = (char *)&id[ATA_ID_PROD];
@@ -626,11 +627,14 @@ static void ide_disk_setup(ide_drive_t *drive)
 		if (max_s > hwif->rqsize)
 			max_s = hwif->rqsize;
 
-		blk_queue_max_sectors(drive->queue, max_s);
+		blk_queue_max_sectors(q, max_s);
 	}
 
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
-			 drive->queue->max_sectors / 2);
+		q->max_sectors / 2);
+
+	if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
 	/* calculate drive capacity, and select LBA if possible */
 	ide_disk_get_capacity(drive);

drivers/ide/scc_pata.c

@@ -536,10 +536,6 @@ static u8 scc_udma_filter(ide_drive_t *drive)
 
 static int setup_mmio_scc (struct pci_dev *dev, const char *name)
 {
-	unsigned long ctl_base = pci_resource_start(dev, 0);
-	unsigned long dma_base = pci_resource_start(dev, 1);
-	unsigned long ctl_size = pci_resource_len(dev, 0);
-	unsigned long dma_size = pci_resource_len(dev, 1);
 	void __iomem *ctl_addr;
 	void __iomem *dma_addr;
 	int i, ret;
@@ -557,10 +553,12 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name)
 		return ret;
 	}
 
-	if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+	ctl_addr = pci_ioremap_bar(dev, 0);
+	if (!ctl_addr)
 		goto fail_0;
 
-	if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+	dma_addr = pci_ioremap_bar(dev, 1);
+	if (!dma_addr)
 		goto fail_1;
 
 	pci_set_master(dev);

drivers/ide/sgiioc4.c

@@ -567,14 +567,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	struct ide_port_info d = sgiioc4_port_info;
 	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	bar0 = pci_resource_start(dev, 0);
-	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+	virt_base = pci_ioremap_bar(dev, 0);
 	if (virt_base == NULL) {
 		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 				DRV_NAME, bar0);
@@ -590,7 +588,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 		printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
 		       "already in use\n", DRV_NAME, pci_name(dev),
 		       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
-		return -EBUSY;
+		rc = -EBUSY;
+		goto req_mem_rgn_err;
 	}
 
 	/* Initialize the IO registers */
@@ -603,21 +602,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL) {
-		rc = -ENOMEM;
-		goto err;
-	}
-
-	rc = ide_host_register(host, &d, hws);
-	if (rc)
-		goto err_free;
+	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	if (!rc)
+		return 0;
 
-	return 0;
-err_free:
-	ide_host_free(host);
-err:
 	release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
+req_mem_rgn_err:
 	iounmap(virt_base);
 	return rc;
 }

drivers/ide/siimage.c

@@ -784,7 +784,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
 				"available\n", pci_name(dev));
 		} else {
-			ioaddr = ioremap(bar5, barsize);
+			ioaddr = pci_ioremap_bar(dev, 5);
 			if (ioaddr == NULL)
 				release_mem_region(bar5, barsize);
 		}