Merge branch 'PTP_CLK-pin-configuration-for-SJA1105-DSA-driver'

Vladimir Oltean says:

====================
PTP_CLK pin configuration for SJA1105 DSA driver

This series adds support for the PTP_CLK pin on SJA1105 to be configured
via the PTP subsystem, in the "periodic output" and "external timestamp
input" modes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/sja1105/sja1105.h

@@ -38,10 +38,13 @@ struct sja1105_regs {
 	u64 config;
 	u64 sgmii;
 	u64 rmii_pll1;
+	u64 ptppinst;
+	u64 ptppindur;
 	u64 ptp_control;
 	u64 ptpclkval;
 	u64 ptpclkrate;
 	u64 ptpclkcorp;
+	u64 ptpsyncts;
 	u64 ptpschtm;
 	u64 ptpegr_ts[SJA1105_NUM_PORTS];
 	u64 pad_mii_tx[SJA1105_NUM_PORTS];
@@ -214,5 +217,7 @@ size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr,
 					 enum packing_op op);
 size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr,
 					    enum packing_op op);
+size_t sja1105pqrs_avb_params_entry_packing(void *buf, void *entry_ptr,
+					    enum packing_op op);
 
 #endif

drivers/net/dsa/sja1105/sja1105_dynamic_config.c

@@ -124,6 +124,9 @@
 #define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD			\
 	SJA1105_SIZE_DYN_CMD
 
+#define SJA1105PQRS_SIZE_AVB_PARAMS_DYN_CMD			\
+	(SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY)
+
 #define SJA1105_MAX_DYN_CMD_SIZE				\
 	SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD
 
@@ -481,6 +484,18 @@ sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
 	return 0;
 }
 
+static void
+sja1105pqrs_avb_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+				   enum packing_op op)
+{
+	u8 *p = buf + SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY;
+	const int size = SJA1105_SIZE_DYN_CMD;
+
+	sja1105_packing(p, &cmd->valid,   31, 31, size, op);
+	sja1105_packing(p, &cmd->errors,  30, 30, size, op);
+	sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
+}
+
 #define OP_READ		BIT(0)
 #define OP_WRITE	BIT(1)
 #define OP_DEL		BIT(2)
@@ -610,7 +625,14 @@ struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
 		.addr = 0x38,
 	},
 	[BLK_IDX_L2_FORWARDING_PARAMS] = {0},
-	[BLK_IDX_AVB_PARAMS] = {0},
+	[BLK_IDX_AVB_PARAMS] = {
+		.entry_packing = sja1105pqrs_avb_params_entry_packing,
+		.cmd_packing = sja1105pqrs_avb_params_cmd_packing,
+		.max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT,
+		.access = (OP_READ | OP_WRITE),
+		.packed_size = SJA1105PQRS_SIZE_AVB_PARAMS_DYN_CMD,
+		.addr = 0x8003,
+	},
 	[BLK_IDX_GENERAL_PARAMS] = {
 		.entry_packing = sja1105et_general_params_entry_packing,
 		.cmd_packing = sja1105et_general_params_cmd_packing,

drivers/net/dsa/sja1105/sja1105_main.c

@@ -479,6 +479,43 @@ static int sja1105_init_general_params(struct sja1105_private *priv)
 	return 0;
 }
 
+static int sja1105_init_avb_params(struct sja1105_private *priv)
+{
+	struct sja1105_avb_params_entry *avb;
+	struct sja1105_table *table;
+
+	table = &priv->static_config.tables[BLK_IDX_AVB_PARAMS];
+
+	/* Discard previous AVB Parameters Table */
+	if (table->entry_count) {
+		kfree(table->entries);
+		table->entry_count = 0;
+	}
+
+	table->entries = kcalloc(SJA1105_MAX_AVB_PARAMS_COUNT,
+				 table->ops->unpacked_entry_size, GFP_KERNEL);
+	if (!table->entries)
+		return -ENOMEM;
+
+	table->entry_count = SJA1105_MAX_AVB_PARAMS_COUNT;
+
+	avb = table->entries;
+
+	/* Configure the MAC addresses for meta frames */
+	avb->destmeta = SJA1105_META_DMAC;
+	avb->srcmeta  = SJA1105_META_SMAC;
+	/* On P/Q/R/S, configure the direction of the PTP_CLK pin as input by
+	 * default. This is because there might be boards with a hardware
+	 * layout where enabling the pin as output might cause an electrical
+	 * clash. On E/T the pin is always an output, which the board designers
+	 * probably already knew, so even if there are going to be electrical
+	 * issues, there's nothing we can do.
+	 */
+	avb->cas_master = false;
+
+	return 0;
+}
+
 #define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000)
 
 static void sja1105_setup_policer(struct sja1105_l2_policing_entry *policing,
@@ -567,6 +604,9 @@ static int sja1105_static_config_load(struct sja1105_private *priv,
 	if (rc < 0)
 		return rc;
 	rc = sja1105_init_general_params(priv);
+	if (rc < 0)
+		return rc;
+	rc = sja1105_init_avb_params(priv);
 	if (rc < 0)
 		return rc;