Merge v5.16-rc5 into drm-next

Thomas Zimmermann requested a fixes backmerge, specifically also for 96c5f82 ("drm/vc4: fix error code in vc4_create_object()") Just a bunch of adjacent changes conflicts, even the big pile of them in vc4. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
mariux64 · Dec 14, 2021 · 99b03ca · 99b03ca
2 parents 211b4db + 2585cf9
commit 99b03ca
Show file tree

Hide file tree

Showing 929 changed files with 10,985 additions and 7,121 deletions.
diff --git a/.mailmap b/.mailmap
@@ -126,6 +126,8 @@ Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
+Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
+Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>

diff --git a/Documentation/admin-guide/blockdev/drbd/figures.rst b/Documentation/admin-guide/blockdev/drbd/figures.rst
@@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
     :alt:   disk-states-8.dot
     :align: center
 
-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
     :align: center
diff --git a/...min-guide/blockdev/drbd/node-states-8.dot → ...min-guide/blockdev/drbd/peer-states-8.dot b/...min-guide/blockdev/drbd/node-states-8.dot → ...min-guide/blockdev/drbd/peer-states-8.dot
@@ -1,8 +1,3 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
 digraph peer_states {
 	Secondary -> Primary           [ label = "recv state packet" ]
 	Primary   -> Secondary 	       [ label = "recv state packet" ]

diff --git a/Documentation/arm64/pointer-authentication.rst b/Documentation/arm64/pointer-authentication.rst
@@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the
 virtual address size configured by the kernel. For example, with a
 virtual address size of 48, the PAC is 7 bits wide.
 
-Recent versions of GCC can compile code with APIAKey-based return
-address protection when passed the -msign-return-address option. This
-uses instructions in the HINT space (unless -march=armv8.3-a or higher
-is also passed), and such code can run on systems without the pointer
-authentication extension.
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.
 
 In addition to exec(), keys can also be reinitialized to random values
 using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,

diff --git a/Documentation/conf.py b/Documentation/conf.py
@@ -249,11 +249,16 @@
 
 html_static_path = ['sphinx-static']
 
-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
+html_css_files = [
+    'theme_overrides.css',
+]
+
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [
+            '_static/theme_overrides.css',
+        ],
+    }
 
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied

diff --git a/Documentation/cpu-freq/core.rst b/Documentation/cpu-freq/core.rst
@@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE.
 The third argument is a struct cpufreq_freqs with the following
 values:
 
-=====	===========================
-cpu	number of the affected CPU
+======	======================================
+policy	a pointer to the struct cpufreq_policy
 old	old frequency
 new	new frequency
 flags	flags of the cpufreq driver
-=====	===========================
+======	======================================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================

diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -17,9 +17,10 @@ properties:
     oneOf:
       - enum:
           - fsl,imx7ulp-lpi2c
-          - fsl,imx8qm-lpi2c
       - items:
-          - const: fsl,imx8qxp-lpi2c
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8qm-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -136,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;

diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -142,7 +142,7 @@ examples:
         down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 

diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:

diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -29,7 +29,7 @@ properties:
           - PHY_TYPE_PCIE
           - PHY_TYPE_SATA
           - PHY_TYPE_SGMII
-          - PHY_TYPE_USB
+          - PHY_TYPE_USB3
       - description: The PHY instance
         minimum: 0
         maximum: 1 # for DP, SATA or USB

diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -105,7 +105,7 @@ examples:
           reg = <0x65>;
           interrupt-parent = <&gpio1>;
           interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
           ti,sc-ocp-limit-microamp = <2000000>;
           ti,sc-ovp-limit-microvolt = <17800000>;
           monitored-battery = <&bat>;

diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
@@ -19,6 +19,9 @@ properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#sound-dai-cells":
     const: 0
 

diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -33,6 +33,7 @@ properties:
               - rockchip,rk3328-spi
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
               - rockchip,rv1126-spi
           - const: rockchip,rk3066-spi
 

diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/cifs/ksmbd.rst
@@ -50,11 +50,11 @@ ksmbd.mountd (user space daemon)
 --------------------------------
 
 ksmbd.mountd is userspace process to, transfer user account and password that
-are registered using ksmbd.adduser(part of utils for user space). Further it
+are registered using ksmbd.adduser (part of utils for user space). Further it
 allows sharing information parameters that parsed from smb.conf to ksmbd in
 kernel. For the execution part it has a daemon which is continuously running
 and connected to the kernel interface using netlink socket, it waits for the
-requests(dcerpc and share/user info). It handles RPC calls (at a minimum few
+requests (dcerpc and share/user info). It handles RPC calls (at a minimum few
 dozen) that are most important for file server from NetShareEnum and
 NetServerGetInfo. Complete DCE/RPC response is prepared from the user space
 and passed over to the associated kernel thread for the client.
@@ -154,11 +154,11 @@ Each layer
 1. Enable all component prints
 	# sudo ksmbd.control -d "all"
 
-2. Enable one of components(smb, auth, vfs, oplock, ipc, conn, rdma)
+2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma)
 	# sudo ksmbd.control -d "smb"
 
-3. Show what prints are enable.
-	# cat/sys/class/ksmbd-control/debug
+3. Show what prints are enabled.
+	# cat /sys/class/ksmbd-control/debug
 	  [smb] auth vfs oplock ipc conn [rdma]
 
 4. Disable prints: