Merge branch 'for-arm-soc/arch-timers' of git://git.kernel.org/pub/sc…

…m/linux/kernel/git/will/linux into kvm-arm/timer

Documentation/device-mapper/dm-raid.txt

@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -1,13 +1,14 @@
 * ARM architected timer
 
-ARM Cortex-A7 and Cortex-A15 have a per-core architected timer, which
-provides per-cpu timers.
+ARM cores may have a per-core architected timer, which provides per-cpu timers.
 
 The timer is attached to a GIC to deliver its per-processor interrupts.
 
 ** Timer node properties:
 
-- compatible : Should at least contain "arm,armv7-timer".
+- compatible : Should at least contain one of
+	"arm,armv7-timer"
+	"arm,armv8-timer"
 
 - interrupts : Interrupt list for secure, non-secure, virtual and
   hypervisor timers, in that order.

Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -81,7 +81,8 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
 		};
 	};
 };

Documentation/filesystems/f2fs.txt

@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |    Node     |   Segment   |   Segment  |      |
-    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |            |            |   Segment   |    Node     |   Segment  |      |
+    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
-   Main area.
-
 - Segment Information Table (SIT)
  : It contains segment information such as valid block count and bitmap for the
    validity of all the blocks.
 
+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+   Main area.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    NAT   |   SIT   |
+  |   CP   |    SIT   |   NAT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

Documentation/x86/boot.txt

@@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
+Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

Documentation/x86/zero-page.txt

@@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

MAINTAINERS

@@ -228,7 +228,7 @@ S:	Maintained
 F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-M:	Joey Lee <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
@@ -648,7 +648,7 @@ F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	MAINTAINED
+S:	Maintained
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@@ -1351,6 +1351,14 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
+WILOCITY WIL6210 WIRELESS DRIVER
+M:	Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
+L:	linux-wireless@vger.kernel.org
+L:	wil6210@qca.qualcomm.com
+S:	Supported
+W:	http://wireless.kernel.org/en/users/Drivers/wil6210
+F:	drivers/net/wireless/ath/wil6210/
+
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
@@ -1964,9 +1972,9 @@ S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Supported
+S:	Odd Fixes
 F:	sound/soc/codecs/cs4270*
 
 CLEANCACHE API
@@ -2958,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3183,9 +3191,9 @@ F:	include/uapi/video/
 F:	include/uapi/linux/fb.h
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linux-fbdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/video/fsl-diu-fb.*
 
 FREESCALE DMA DRIVER
@@ -3220,9 +3228,8 @@ F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Orphan
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
@@ -3241,16 +3248,16 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
@@ -4908,7 +4915,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5087,7 +5094,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
 MSI LAPTOP SUPPORT
-M:	"Lee, Chun-Yi" <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
@@ -5183,7 +5190,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -5517,8 +5524,7 @@ M:	Benoît Cousson <b-cousson@ti.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod.c
-F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
+F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <b-cousson@ti.com>
@@ -6589,7 +6595,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h
 
 SERIAL DRIVERS
-M:	Alan Cox <alan@linux.intel.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial
@@ -7092,7 +7098,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@ti.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -7344,7 +7350,7 @@ S:	Odd Fixes
 F:	drivers/staging/speakup/
 
 STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@ti.com>
+M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
@@ -8536,7 +8542,7 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <mjg@redhat.com>
+M:	Matthew Garrett <matthew.garrett@nebula.com>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ )
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------

arch/arm/Kconfig

@@ -4,6 +4,7 @@ config ARM
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT if MMU
 	select CPU_PM if (SUSPEND || CPU_IDLE)
@@ -1572,9 +1573,10 @@ config HAVE_ARM_SCU
 	help
 	  This option enables support for the ARM system coherency unit
 
-config ARM_ARCH_TIMER
+config HAVE_ARM_ARCH_TIMER
 	bool "Architected timer support"
 	depends on CPU_V7
+	select ARM_ARCH_TIMER
 	help
 	  This option enables support for the ARM architected timer
 

arch/arm/boot/dts/Makefile

@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the

arch/arm/boot/dts/armada-370-db.dts

@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {