Merge tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for boot breakage because of misaligned FDTs

 - fix for overwritten exception handlers

 - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
   performance

* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Reserve exception base early to prevent corruption
  MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
  crypto: mips/poly1305 - enable for all MIPS processors
  MIPS: boot/compressed: Copy DTB to aligned address

arch/mips/boot/compressed/decompress.c

@@ -14,6 +14,7 @@
 
 #include <asm/addrspace.h>
 #include <asm/unaligned.h>
+#include <asm-generic/vmlinux.lds.h>
 
 /*
  * These two variables specify the free mem region
@@ -120,6 +121,13 @@ void decompress_kernel(unsigned long boot_heap_start)
 		/* last four bytes is always image size in little endian */
 		image_size = get_unaligned_le32((void *)&__image_end - 4);
 
+		/* The device tree's address must be properly aligned  */
+		image_size = ALIGN(image_size, STRUCT_ALIGNMENT);
+
+		puts("Copy device tree to address  ");
+		puthex(VMLINUX_LOAD_ADDRESS_ULL + image_size);
+		puts("\n");
+
 		/* copy dtb to where the booted kernel will expect it */
 		memcpy((void *)VMLINUX_LOAD_ADDRESS_ULL + image_size,
 		       __appended_dtb, dtb_size);

arch/mips/crypto/Makefile

@@ -12,8 +12,8 @@ AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
 obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
 poly1305-mips-y := poly1305-core.o poly1305-glue.o
 
-perlasm-flavour-$(CONFIG_CPU_MIPS32) := o32
-perlasm-flavour-$(CONFIG_CPU_MIPS64) := 64
+perlasm-flavour-$(CONFIG_32BIT) := o32
+perlasm-flavour-$(CONFIG_64BIT) := 64
 
 quiet_cmd_perlasm = PERLASM $@
       cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)

arch/mips/include/asm/traps.h

@@ -24,8 +24,11 @@ extern void (*board_ebase_setup)(void);
 extern void (*board_cache_error_setup)(void);
 
 extern int register_nmi_notifier(struct notifier_block *nb);
+extern void reserve_exception_space(phys_addr_t addr, unsigned long size);
 extern char except_vec_nmi[];
 
+#define VECTORSPACING 0x100	/* for EI/VI mode */
+
 #define nmi_notifier(fn, pri)						\
 ({									\
 	static struct notifier_block fn##_nb = {			\

arch/mips/kernel/cpu-probe.c

@@ -26,6 +26,7 @@
 #include <asm/elf.h>
 #include <asm/pgtable-bits.h>
 #include <asm/spram.h>
+#include <asm/traps.h>
 #include <linux/uaccess.h>
 
 #include "fpu-probe.h"
@@ -1628,6 +1629,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_BMIPS3300;
 		__cpu_name[cpu] = "Broadcom BMIPS3300";
 		set_elf_platform(cpu, "bmips3300");
+		reserve_exception_space(0x400, VECTORSPACING * 64);
 		break;
 	case PRID_IMP_BMIPS43XX: {
 		int rev = c->processor_id & PRID_REV_MASK;
@@ -1638,6 +1640,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "Broadcom BMIPS4380";
 			set_elf_platform(cpu, "bmips4380");
 			c->options |= MIPS_CPU_RIXI;
+			reserve_exception_space(0x400, VECTORSPACING * 64);
 		} else {
 			c->cputype = CPU_BMIPS4350;
 			__cpu_name[cpu] = "Broadcom BMIPS4350";
@@ -1654,6 +1657,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "Broadcom BMIPS5000";
 		set_elf_platform(cpu, "bmips5000");
 		c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI;
+		reserve_exception_space(0x1000, VECTORSPACING * 64);
 		break;
 	}
 }
@@ -2133,6 +2137,8 @@ void cpu_probe(void)
 	if (cpu == 0)
 		__ua_limit = ~((1ull << cpu_vmbits) - 1);
 #endif
+
+	reserve_exception_space(0, 0x1000);
 }
 
 void cpu_report(void)

arch/mips/kernel/cpu-r3k-probe.c

@@ -21,6 +21,7 @@
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/elf.h>
+#include <asm/traps.h>
 
 #include "fpu-probe.h"
 
@@ -158,6 +159,8 @@ void cpu_probe(void)
 		cpu_set_fpu_opts(c);
 	else
 		cpu_set_nofpu_opts(c);
+
+	reserve_exception_space(0, 0x400);
 }
 
 void cpu_report(void)

arch/mips/kernel/traps.c

@@ -2009,13 +2009,16 @@ void __noreturn nmi_exception_handler(struct pt_regs *regs)
 	nmi_exit();
 }
 
-#define VECTORSPACING 0x100	/* for EI/VI mode */
-
 unsigned long ebase;
 EXPORT_SYMBOL_GPL(ebase);
 unsigned long exception_handlers[32];
 unsigned long vi_handlers[64];
 
+void reserve_exception_space(phys_addr_t addr, unsigned long size)
+{
+	memblock_reserve(addr, size);
+}
+
 void __init *set_except_vector(int n, void *addr)
 {
 	unsigned long handler = (unsigned long) addr;
@@ -2367,10 +2370,7 @@ void __init trap_init(void)
 
 	if (!cpu_has_mips_r2_r6) {
 		ebase = CAC_BASE;
-		ebase_pa = virt_to_phys((void *)ebase);
 		vec_size = 0x400;
-
-		memblock_reserve(ebase_pa, vec_size);
 	} else {
 		if (cpu_has_veic || cpu_has_vint)
 			vec_size = 0x200 + VECTORSPACING*64;

arch/mips/kernel/vmlinux.lds.S

@@ -145,6 +145,7 @@ SECTIONS
 	}
 
 #ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	STRUCT_ALIGN();
 	.appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
 		*(.appended_dtb)
 		KEEP(*(.appended_dtb))
@@ -172,6 +173,11 @@ SECTIONS
 #endif
 
 #ifdef CONFIG_MIPS_RAW_APPENDED_DTB
+	.fill : {
+		FILL(0);
+		BYTE(0);
+		. = ALIGN(8);
+	}
 	__appended_dtb = .;
 	/* leave space for appended DTB */
 	. += 0x100000;

crypto/Kconfig

@@ -767,7 +767,7 @@ config CRYPTO_POLY1305_X86_64
 
 config CRYPTO_POLY1305_MIPS
 	tristate "Poly1305 authenticator algorithm (MIPS optimized)"
-	depends on CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
+	depends on MIPS
 	select CRYPTO_ARCH_HAVE_LIB_POLY1305
 
 config CRYPTO_MD4

drivers/net/Kconfig

@@ -94,7 +94,7 @@ config WIREGUARD
 	select CRYPTO_BLAKE2S_ARM if ARM
 	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
 	select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
-	select CRYPTO_POLY1305_MIPS if CPU_MIPS32 || (CPU_MIPS64 && 64BIT)
+	select CRYPTO_POLY1305_MIPS if MIPS
 	help
 	  WireGuard is a secure, fast, and easy to use replacement for IPSec
 	  that uses modern cryptography and clever networking tricks. It's