MIPS: kernel: traps: Add MIPS R6 related definitions

Add MIPS R6 support to cache and ftlb exceptions, as well as
to the hwrena and ebase register configuration.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

arch/mips/kernel/traps.c

@@ -1649,7 +1649,7 @@ asmlinkage void cache_parity_error(void)
 	printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
 	       reg_val & (1<<30) ? "secondary" : "primary",
 	       reg_val & (1<<31) ? "data" : "insn");
-	if (cpu_has_mips_r2 &&
+	if ((cpu_has_mips_r2_r6) &&
 	    ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) {
 		pr_err("Error bits: %s%s%s%s%s%s%s%s\n",
 			reg_val & (1<<29) ? "ED " : "",
@@ -1689,7 +1689,7 @@ asmlinkage void do_ftlb(void)
 	unsigned int reg_val;
 
 	/* For the moment, report the problem and hang. */
-	if (cpu_has_mips_r2 &&
+	if ((cpu_has_mips_r2_r6) &&
 	    ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) {
 		pr_err("FTLB error exception, cp0_ecc=0x%08x:\n",
 		       read_c0_ecc());
@@ -1978,7 +1978,7 @@ static void configure_hwrena(void)
 {
 	unsigned int hwrena = cpu_hwrena_impl_bits;
 
-	if (cpu_has_mips_r2)
+	if (cpu_has_mips_r2_r6)
 		hwrena |= 0x0000000f;
 
 	if (!noulri && cpu_has_userlocal)
@@ -2022,7 +2022,7 @@ void per_cpu_trap_init(bool is_boot_cpu)
 	 *  o read IntCtl.IPTI to determine the timer interrupt
 	 *  o read IntCtl.IPPCI to determine the performance counter interrupt
 	 */
-	if (cpu_has_mips_r2) {
+	if (cpu_has_mips_r2_r6) {
 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
@@ -2113,7 +2113,7 @@ void __init trap_init(void)
 #else
         ebase = CKSEG0;
 #endif
-		if (cpu_has_mips_r2)
+		if (cpu_has_mips_r2_r6)
 			ebase += (read_c0_ebase() & 0x3ffff000);
 	}