igb: add XDP support

Add XDP support to the IGB driver.
The implementation follows the IXGBE XDP implementation
closely and I used the following patches as basis:

1. commit 9247080 ("ixgbe: add XDP support for pass and drop actions")
2. commit 33fdc82 ("ixgbe: add support for XDP_TX action")
3. commit ed93a39 ("ixgbe: tweak page counting for XDP_REDIRECT")

Due to the hardware constraints of the devices using the
IGB driver we must share the TX queues with XDP which
means locking the TX queue for XDP.

I ran tests on an older device to get better numbers.
Test machine:

Intel(R) Atom(TM) CPU C2338 @ 1.74GHz (2 Cores)
2x Intel I211

Routing Original Driver Network Stack: 382 Kpps

Routing XDP Redirect (xdp_fwd_kern): 1.48 Mpps
XDP Drop: 1.48 Mpps

Using XDP we can achieve line rate forwarding even on
an older Intel Atom CPU.

Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/igb/igb.h

@@ -19,6 +19,8 @@
 #include <linux/pci.h>
 #include <linux/mdio.h>
 
+#include <net/xdp.h>
+
 struct igb_adapter;
 
 #define E1000_PCS_CFG_IGN_SD	1
@@ -79,6 +81,12 @@ struct igb_adapter;
 #define IGB_I210_RX_LATENCY_100		2213
 #define IGB_I210_RX_LATENCY_1000	448
 
+/* XDP */
+#define IGB_XDP_PASS		0
+#define IGB_XDP_CONSUMED	BIT(0)
+#define IGB_XDP_TX		BIT(1)
+#define IGB_XDP_REDIR		BIT(2)
+
 struct vf_data_storage {
 	unsigned char vf_mac_addresses[ETH_ALEN];
 	u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
@@ -132,17 +140,62 @@ struct vf_mac_filter {
 
 /* Supported Rx Buffer Sizes */
 #define IGB_RXBUFFER_256	256
+#define IGB_RXBUFFER_1536	1536
 #define IGB_RXBUFFER_2048	2048
 #define IGB_RXBUFFER_3072	3072
 #define IGB_RX_HDR_LEN		IGB_RXBUFFER_256
 #define IGB_TS_HDR_LEN		16
 
-#define IGB_SKB_PAD		(NET_SKB_PAD + NET_IP_ALIGN)
+/* Attempt to maximize the headroom available for incoming frames.  We
+ * use a 2K buffer for receives and need 1536/1534 to store the data for
+ * the frame.  This leaves us with 512 bytes of room.  From that we need
+ * to deduct the space needed for the shared info and the padding needed
+ * to IP align the frame.
+ *
+ * Note: For cache line sizes 256 or larger this value is going to end
+ *	 up negative.  In these cases we should fall back to the 3K
+ *	 buffers.
+ */
 #if (PAGE_SIZE < 8192)
-#define IGB_MAX_FRAME_BUILD_SKB \
-	(SKB_WITH_OVERHEAD(IGB_RXBUFFER_2048) - IGB_SKB_PAD - IGB_TS_HDR_LEN)
+#define IGB_MAX_FRAME_BUILD_SKB (IGB_RXBUFFER_1536 - NET_IP_ALIGN)
+#define IGB_2K_TOO_SMALL_WITH_PADDING \
+((NET_SKB_PAD + IGB_TS_HDR_LEN + IGB_RXBUFFER_1536) > SKB_WITH_OVERHEAD(IGB_RXBUFFER_2048))
+
+static inline int igb_compute_pad(int rx_buf_len)
+{
+	int page_size, pad_size;
+
+	page_size = ALIGN(rx_buf_len, PAGE_SIZE / 2);
+	pad_size = SKB_WITH_OVERHEAD(page_size) - rx_buf_len;
+
+	return pad_size;
+}
+
+static inline int igb_skb_pad(void)
+{
+	int rx_buf_len;
+
+	/* If a 2K buffer cannot handle a standard Ethernet frame then
+	 * optimize padding for a 3K buffer instead of a 1.5K buffer.
+	 *
+	 * For a 3K buffer we need to add enough padding to allow for
+	 * tailroom due to NET_IP_ALIGN possibly shifting us out of
+	 * cache-line alignment.
+	 */
+	if (IGB_2K_TOO_SMALL_WITH_PADDING)
+		rx_buf_len = IGB_RXBUFFER_3072 + SKB_DATA_ALIGN(NET_IP_ALIGN);
+	else
+		rx_buf_len = IGB_RXBUFFER_1536;
+
+	/* if needed make room for NET_IP_ALIGN */
+	rx_buf_len -= NET_IP_ALIGN;
+
+	return igb_compute_pad(rx_buf_len);
+}
+
+#define IGB_SKB_PAD	igb_skb_pad()
 #else
-#define IGB_MAX_FRAME_BUILD_SKB (IGB_RXBUFFER_2048 - IGB_TS_HDR_LEN)
+#define IGB_SKB_PAD	(NET_SKB_PAD + NET_IP_ALIGN)
 #endif
 
 /* How many Rx Buffers do we bundle into one write to the hardware ? */
@@ -194,13 +247,22 @@ enum igb_tx_flags {
 #define IGB_SFF_ADDRESSING_MODE		0x4
 #define IGB_SFF_8472_UNSUP		0x00
 
+enum igb_tx_buf_type {
+	IGB_TYPE_SKB = 0,
+	IGB_TYPE_XDP,
+};
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer
  */
 struct igb_tx_buffer {
 	union e1000_adv_tx_desc *next_to_watch;
 	unsigned long time_stamp;
-	struct sk_buff *skb;
+	enum igb_tx_buf_type type;
+	union {
+		struct sk_buff *skb;
+		struct xdp_frame *xdpf;
+	};
 	unsigned int bytecount;
 	u16 gso_segs;
 	__be16 protocol;
@@ -248,6 +310,7 @@ struct igb_ring_container {
 struct igb_ring {
 	struct igb_q_vector *q_vector;	/* backlink to q_vector */
 	struct net_device *netdev;	/* back pointer to net_device */
+	struct bpf_prog *xdp_prog;
 	struct device *dev;		/* device pointer for dma mapping */
 	union {				/* array of buffer info structs */
 		struct igb_tx_buffer *tx_buffer_info;
@@ -288,6 +351,7 @@ struct igb_ring {
 			struct u64_stats_sync rx_syncp;
 		};
 	};
+	struct xdp_rxq_info xdp_rxq;
 } ____cacheline_internodealigned_in_smp;
 
 struct igb_q_vector {
@@ -339,7 +403,7 @@ static inline unsigned int igb_rx_bufsz(struct igb_ring *ring)
 		return IGB_RXBUFFER_3072;
 
 	if (ring_uses_build_skb(ring))
-		return IGB_MAX_FRAME_BUILD_SKB + IGB_TS_HDR_LEN;
+		return IGB_MAX_FRAME_BUILD_SKB;
 #endif
 	return IGB_RXBUFFER_2048;
 }
@@ -467,6 +531,7 @@ struct igb_adapter {
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 
 	struct net_device *netdev;
+	struct bpf_prog *xdp_prog;
 
 	unsigned long state;
 	unsigned int flags;
@@ -643,6 +708,9 @@ enum igb_boards {
 
 extern char igb_driver_name[];
 
+int igb_xmit_xdp_ring(struct igb_adapter *adapter,
+		      struct igb_ring *ring,
+		      struct xdp_frame *xdpf);
 int igb_open(struct net_device *netdev);
 int igb_close(struct net_device *netdev);
 int igb_up(struct igb_adapter *);

drivers/net/ethernet/intel/igb/igb_ethtool.c

@@ -961,6 +961,10 @@ static int igb_set_ringparam(struct net_device *netdev,
 			memcpy(&temp_ring[i], adapter->rx_ring[i],
 			       sizeof(struct igb_ring));
 
+			/* Clear copied XDP RX-queue info */
+			memset(&temp_ring[i].xdp_rxq, 0,
+			       sizeof(temp_ring[i].xdp_rxq));
+
 			temp_ring[i].count = new_rx_count;
 			err = igb_setup_rx_resources(&temp_ring[i]);
 			if (err) {