[media] rc-core: rename dev->scanmask to dev->scancode_mask

We already have dev->scancode_filter and dev->scancode_wakeup_filter
so rename dev->scanmask to dev->scancode_mask for consistency.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/pci/cx88/cx88-input.c

@@ -478,7 +478,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	dev->priv = core;
 	dev->open = cx88_ir_open;
 	dev->close = cx88_ir_close;
-	dev->scanmask = hardware_mask;
+	dev->scancode_mask = hardware_mask;
 
 	if (ir->sampling) {
 		dev->driver_type = RC_DRIVER_IR_RAW;

drivers/media/pci/ttpci/budget-ci.c

@@ -234,7 +234,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 		break;
 	}
 	if (!budget_ci->ir.full_rc5)
-		dev->scanmask = 0xff;
+		dev->scancode_mask = 0xff;
 
 	error = rc_register_device(dev);
 	if (error) {

drivers/media/rc/rc-main.c

@@ -285,8 +285,8 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
 	 * IR tables from other remotes. So, we support specifying a mask to
 	 * indicate the valid bits of the scancodes.
 	 */
-	if (dev->scanmask)
-		scancode &= dev->scanmask;
+	if (dev->scancode_mask)
+		scancode &= dev->scancode_mask;
 
 	/* First check if we already have a mapping for this ir command */
 	for (i = 0; i < rc_map->len; i++) {

drivers/media/usb/cx231xx/cx231xx-input.c

@@ -91,7 +91,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	dev->init_data.get_key = get_key_isdbt;
 	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
 	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
-	dev->init_data.rc_dev->scanmask = 0xff;
+	dev->init_data.rc_dev->scancode_mask = 0xff;
 	dev->init_data.rc_dev->driver_name = "cx231xx";
 	dev->init_data.type = RC_BIT_NEC;
 	info.addr = 0x30;

drivers/media/usb/tm6000/tm6000-input.c

@@ -443,7 +443,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
 	/* input setup */
 	rc->allowed_protocols = RC_BIT_RC5 | RC_BIT_NEC;
 	/* Neded, in order to support NEC remotes with 24 or 32 bits */
-	rc->scanmask = 0xffff;
+	rc->scancode_mask = 0xffff;
 	rc->priv = ir;
 	rc->change_protocol = tm6000_ir_change_protocol;
 	if (dev->int_in.endp) {

include/media/rc-core.h

@@ -80,11 +80,12 @@ enum rc_filter_type {
  * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols
  * @scancode_filter: scancode filter
  * @scancode_wakeup_filter: scancode wakeup filters
- * @scanmask: some hardware decoders are not capable of providing the full
+ * @scancode_mask: some hardware decoders are not capable of providing the full
  *	scancode to the application. As this is a hardware limit, we can't do
  *	anything with it. Yet, as the same keycode table can be used with other
  *	devices, a mask is provided to allow its usage. Drivers should generally
  *	leave this field in blank
+ * @users: number of current users of the device
  * @priv: driver-specific data
  * @keylock: protects the remaining members of the struct
  * @keypressed: whether a key is currently pressed
@@ -139,8 +140,8 @@ struct rc_dev {
 	u64				enabled_wakeup_protocols;
 	struct rc_scancode_filter	scancode_filter;
 	struct rc_scancode_filter	scancode_wakeup_filter;
+	u32				scancode_mask;
 	u32				users;
-	u32				scanmask;
 	void				*priv;
 	spinlock_t			keylock;
 	bool				keypressed;