Merge tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.ker…

…nel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical

From Tony Lindgren:
Non-critical fixes for omaps for v3.11 merge window.

* tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap-usb-host: Fix memory leaks
  ARM: OMAP2+: Fix serial init for device tree based booting
  arm/omap: use const char properly
  ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails
  ARM: OMAP2+: devices: Do not print error when DMIC hwmod lookup fails
  ARM: OMAP2+: devices: Do not print error when McPDM hwmod lookup fails
  ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0
  ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0
  ARM: OMAP: fix dsi regulator names
  + Linux 3.10-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/dmatest.txt

@@ -34,7 +34,7 @@ command:
 After a while you will start to get messages about current status or error like
 in the original code.
 
-Note that running a new test will stop any in progress test.
+Note that running a new test will not stop any in progress test.
 
 The following command should return actual state of the test.
 	% cat /sys/kernel/debug/dmatest/run
@@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state.
 
 The module parameters that is supplied to the kernel command line will be used
 for the first performed test. After user gets a control, the test could be
-interrupted or re-run with same or different parameters. For the details see
-the above section "Part 2 - When dmatest is built as a module..."
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
 
 In both cases the module parameters are used as initial values for the test case.
 You always could check them at run-time by running

Documentation/filesystems/xfs.txt

@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
 	removing extended attributes) the on-disk superblock feature
 	bit field will be updated to reflect this format being in use.
 
+	CRC enabled filesystems always use the attr2 format, and so
+	will reject the noattr2 mount option if it is set.
+
   barrier
 	Enables the use of block layer write barriers for writes into
 	the journal and unwritten extent conversion.  This allows for

MAINTAINERS

@@ -2890,8 +2890,8 @@ F:	drivers/media/dvb-frontends/ec100*
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
+W:	http://ecryptfs.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
 F:	Documentation/filesystems/ecryptfs.txt
@@ -4448,6 +4448,16 @@ S:	Maintained
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
+ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
+M:	Or Gerlitz <ogerlitz@mellanox.com>
+M:	Roi Dayan <roid@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+S:	Supported
+W:	http://www.openfabrics.org
+W:	www.open-iscsi.org
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+F:	drivers/infiniband/ulp/iser
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/boot/dts/bcm2835.dtsi

@@ -44,6 +44,7 @@
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
 			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
 		};
 
 		gpio: gpio {

arch/arm/boot/dts/imx25.dtsi

@@ -141,8 +141,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>;
-				clock-names = "ipg";
+				clocks = <&clks 62>, <&clks 62>;
+				clock-names = "ipg", "per";
 				interrupts = <14>;
 				status = "disabled";
 			};
@@ -182,8 +182,8 @@
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50004000 0x4000>;
 				interrupts = <0>;
-				clocks = <&clks 80>;
-				clock-names = "ipg";
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -210,8 +210,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>;
-				clock-names = "ipg";
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
 				interrupts = <13>;
 				status = "disabled";
 			};

arch/arm/boot/dts/imx27.dtsi

@@ -131,7 +131,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 0>;
+				clocks = <&clks 53>, <&clks 53>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -142,7 +142,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 0>;
+				clocks = <&clks 52>, <&clks 52>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -223,7 +223,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 0>;
+				clocks = <&clks 51>, <&clks 51>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51.dtsi

@@ -631,7 +631,7 @@
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx53.dtsi

@@ -714,7 +714,7 @@
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/include/asm/tlb.h

@@ -33,18 +33,6 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb)	0
-#else
-#define tlb_fast_mode(tlb)	1
-#endif
-
 #define MMU_GATHER_BUNDLE	8
 
 /*
@@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 {
 	tlb_flush(tlb);
-	if (!tlb_fast_mode(tlb)) {
-		free_pages_and_swap_cache(tlb->pages, tlb->nr);
-		tlb->nr = 0;
-		if (tlb->pages == tlb->local)
-			__tlb_alloc_page(tlb);
-	}
+	free_pages_and_swap_cache(tlb->pages, tlb->nr);
+	tlb->nr = 0;
+	if (tlb->pages == tlb->local)
+		__tlb_alloc_page(tlb);
 }
 
 static inline void
@@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 
 static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu */
-	}
-
 	tlb->pages[tlb->nr++] = page;
 	VM_BUG_ON(tlb->nr > tlb->max);
 	return tlb->max - tlb->nr;

arch/arm/kvm/arm.c

@@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
 	wait_event_interruptible(*wq, !vcpu->arch.pause);
 }
 
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.target >= 0;
+}
+
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
@@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int ret;
 	sigset_t sigsaved;
 
-	/* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
-	if (unlikely(vcpu->arch.target < 0))
+	if (unlikely(!kvm_vcpu_initialized(vcpu)))
 		return -ENOEXEC;
 
 	ret = kvm_vcpu_first_run_init(vcpu);
@@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_SET_ONE_REG:
 	case KVM_GET_ONE_REG: {
 		struct kvm_one_reg reg;
+
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg, argp, sizeof(reg)))
 			return -EFAULT;
 		if (ioctl == KVM_SET_ONE_REG)
@@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		struct kvm_reg_list reg_list;
 		unsigned n;
 
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
 			return -EFAULT;
 		n = reg_list.n;

arch/arm/kvm/mmu.c

@@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector;
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
-	kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
+	/*
+	 * This function also gets called when dealing with HYP page
+	 * tables. As HYP doesn't have an associated struct kvm (and
+	 * the HYP page tables are fairly static), we don't do
+	 * anything there.
+	 */
+	if (kvm)
+		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
 }
 
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
@@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
 	return p;
 }
 
-static void clear_pud_entry(pud_t *pud)
+static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
 {
 	pmd_t *pmd_table = pmd_offset(pud, 0);
 	pud_clear(pud);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
 	pmd_free(NULL, pmd_table);
 	put_page(virt_to_page(pud));
 }
 
-static void clear_pmd_entry(pmd_t *pmd)
+static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
 {
 	pte_t *pte_table = pte_offset_kernel(pmd, 0);
 	pmd_clear(pmd);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
 	pte_free_kernel(NULL, pte_table);
 	put_page(virt_to_page(pmd));
 }
@@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd)
 	return page_count(pmd_page) == 1;
 }
 
-static void clear_pte_entry(pte_t *pte)
+static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr)
 {
 	if (pte_present(*pte)) {
 		kvm_set_pte(pte, __pte(0));
 		put_page(virt_to_page(pte));
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
 	}
 }
 
@@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte)
 	return page_count(pte_page) == 1;
 }
 
-static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
+static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
+			unsigned long long start, u64 size)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
 		}
 
 		pte = pte_offset_kernel(pmd, addr);
-		clear_pte_entry(pte);
+		clear_pte_entry(kvm, pte, addr);
 		range = PAGE_SIZE;
 
 		/* If we emptied the pte, walk back up the ladder */
 		if (pte_empty(pte)) {
-			clear_pmd_entry(pmd);
+			clear_pmd_entry(kvm, pmd, addr);
 			range = PMD_SIZE;
 			if (pmd_empty(pmd)) {
-				clear_pud_entry(pud);
+				clear_pud_entry(kvm, pud, addr);
 				range = PUD_SIZE;
 			}
 		}
@@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void)
 	mutex_lock(&kvm_hyp_pgd_mutex);
 
 	if (boot_hyp_pgd) {
-		unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
-		unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
+		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 		kfree(boot_hyp_pgd);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd)
-		unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 
 	kfree(init_bounce_page);
 	init_bounce_page = NULL;
@@ -200,9 +211,10 @@ void free_hyp_pgds(void)
 
 	if (hyp_pgd) {
 		for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
-			unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
-			unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+
 		kfree(hyp_pgd);
 		hyp_pgd = NULL;
 	}
@@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
  */
 static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 {
-	unmap_range(kvm->arch.pgd, start, size);
+	unmap_range(kvm, kvm->arch.pgd, start, size);
 }
 
 /**
@@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm,
 static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
 {
 	unmap_stage2_range(kvm, gpa, PAGE_SIZE);
-	kvm_tlb_flush_vmid_ipa(kvm, gpa);
 }
 
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)

arch/arm/mach-exynos/common.c

@@ -386,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
 
 void __init exynos_init_io(struct map_desc *mach_desc, int size)
 {
+	debug_ll_io_init();
+
 #ifdef CONFIG_OF
 	if (initial_boot_params)
 		of_scan_flat_dt(exynos_fdt_map_chipid, NULL);

arch/arm/mach-imx/clk-imx6q.c

@@ -181,14 +181,14 @@ static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy",
 static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
-static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
 static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ldb_di_sels[]	= { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };