Merge branch 'stmmac'

Giuseppe Cavallaro says:

====================
stmmac fixes: EEE and chained mode

These patches are to fix some new problems in the STMMAC driver.

Mandatory changes are for EEE that needs to be disabled if not supported
and for the chain mode that is broken and the kernel panics if this mode
is enabled.

v3: removed a patch from my previous set that touched the stmmac_tx path
    that has not to be applied. Other patches for cleaning-up will be
    sent on top of net-next git repo.

v4: do not surround the defaul buffer selection using Koption and adopt
    a default to 1536bytes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/chain_mode.c

@@ -151,7 +151,7 @@ static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
 					  sizeof(struct dma_desc)));
 }
 
-const struct stmmac_chain_mode_ops chain_mode_ops = {
+const struct stmmac_mode_ops chain_mode_ops = {
 	.init = stmmac_init_dma_chain,
 	.is_jumbo_frm = stmmac_is_jumbo_frm,
 	.jumbo_frm = stmmac_jumbo_frm,

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -419,20 +419,13 @@ struct mii_regs {
 	unsigned int data;	/* MII Data */
 };
 
-struct stmmac_ring_mode_ops {
-	unsigned int (*is_jumbo_frm) (int len, int ehn_desc);
-	unsigned int (*jumbo_frm) (void *priv, struct sk_buff *skb, int csum);
-	void (*refill_desc3) (void *priv, struct dma_desc *p);
-	void (*init_desc3) (struct dma_desc *p);
-	void (*clean_desc3) (void *priv, struct dma_desc *p);
-	int (*set_16kib_bfsize) (int mtu);
-};
-
-struct stmmac_chain_mode_ops {
+struct stmmac_mode_ops {
 	void (*init) (void *des, dma_addr_t phy_addr, unsigned int size,
 		      unsigned int extend_desc);
 	unsigned int (*is_jumbo_frm) (int len, int ehn_desc);
 	unsigned int (*jumbo_frm) (void *priv, struct sk_buff *skb, int csum);
+	int (*set_16kib_bfsize)(int mtu);
+	void (*init_desc3)(struct dma_desc *p);
 	void (*refill_desc3) (void *priv, struct dma_desc *p);
 	void (*clean_desc3) (void *priv, struct dma_desc *p);
 };
@@ -441,8 +434,7 @@ struct mac_device_info {
 	const struct stmmac_ops *mac;
 	const struct stmmac_desc_ops *desc;
 	const struct stmmac_dma_ops *dma;
-	const struct stmmac_ring_mode_ops *ring;
-	const struct stmmac_chain_mode_ops *chain;
+	const struct stmmac_mode_ops *mode;
 	const struct stmmac_hwtimestamp *ptp;
 	struct mii_regs mii;	/* MII register Addresses */
 	struct mac_link link;
@@ -460,7 +452,7 @@ void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
 void stmmac_set_mac(void __iomem *ioaddr, bool enable);
 
 void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr);
-extern const struct stmmac_ring_mode_ops ring_mode_ops;
-extern const struct stmmac_chain_mode_ops chain_mode_ops;
+extern const struct stmmac_mode_ops ring_mode_ops;
+extern const struct stmmac_mode_ops chain_mode_ops;
 
 #endif /* __COMMON_H__ */

drivers/net/ethernet/stmicro/stmmac/ring_mode.c

@@ -100,10 +100,9 @@ static void stmmac_refill_desc3(void *priv_ptr, struct dma_desc *p)
 {
 	struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr;
 
-	if (unlikely(priv->plat->has_gmac))
-		/* Fill DES3 in case of RING mode */
-		if (priv->dma_buf_sz >= BUF_SIZE_8KiB)
-			p->des3 = p->des2 + BUF_SIZE_8KiB;
+	/* Fill DES3 in case of RING mode */
+	if (priv->dma_buf_sz >= BUF_SIZE_8KiB)
+		p->des3 = p->des2 + BUF_SIZE_8KiB;
 }
 
 /* In ring mode we need to fill the desc3 because it is used as buffer */
@@ -126,7 +125,7 @@ static int stmmac_set_16kib_bfsize(int mtu)
 	return ret;
 }
 
-const struct stmmac_ring_mode_ops ring_mode_ops = {
+const struct stmmac_mode_ops ring_mode_ops = {
 	.is_jumbo_frm = stmmac_is_jumbo_frm,
 	.jumbo_frm = stmmac_jumbo_frm,
 	.refill_desc3 = stmmac_refill_desc3,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -92,8 +92,8 @@ static int tc = TC_DEFAULT;
 module_param(tc, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(tc, "DMA threshold control value");
 
-#define DMA_BUFFER_SIZE	BUF_SIZE_4KiB
-static int buf_sz = DMA_BUFFER_SIZE;
+#define	DEFAULT_BUFSIZE	1536
+static int buf_sz = DEFAULT_BUFSIZE;
 module_param(buf_sz, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(buf_sz, "DMA buffer size");
 
@@ -136,8 +136,8 @@ static void stmmac_verify_args(void)
 		dma_rxsize = DMA_RX_SIZE;
 	if (unlikely(dma_txsize < 0))
 		dma_txsize = DMA_TX_SIZE;
-	if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
-		buf_sz = DMA_BUFFER_SIZE;
+	if (unlikely((buf_sz < DEFAULT_BUFSIZE) || (buf_sz > BUF_SIZE_16KiB)))
+		buf_sz = DEFAULT_BUFSIZE;
 	if (unlikely(flow_ctrl > 1))
 		flow_ctrl = FLOW_AUTO;
 	else if (likely(flow_ctrl < 0))
@@ -286,10 +286,25 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 
 	/* MAC core supports the EEE feature. */
 	if (priv->dma_cap.eee) {
+		int tx_lpi_timer = priv->tx_lpi_timer;
+
 		/* Check if the PHY supports EEE */
-		if (phy_init_eee(priv->phydev, 1))
+		if (phy_init_eee(priv->phydev, 1)) {
+			/* To manage at run-time if the EEE cannot be supported
+			 * anymore (for example because the lp caps have been
+			 * changed).
+			 * In that case the driver disable own timers.
+			 */
+			if (priv->eee_active) {
+				pr_debug("stmmac: disable EEE\n");
+				del_timer_sync(&priv->eee_ctrl_timer);
+				priv->hw->mac->set_eee_timer(priv->ioaddr, 0,
+							     tx_lpi_timer);
+			}
+			priv->eee_active = 0;
 			goto out;
-
+		}
+		/* Activate the EEE and start timers */
 		if (!priv->eee_active) {
 			priv->eee_active = 1;
 			init_timer(&priv->eee_ctrl_timer);
@@ -300,13 +315,13 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 
 			priv->hw->mac->set_eee_timer(priv->ioaddr,
 						     STMMAC_DEFAULT_LIT_LS,
-						     priv->tx_lpi_timer);
+						     tx_lpi_timer);
 		} else
 			/* Set HW EEE according to the speed */
 			priv->hw->mac->set_eee_pls(priv->ioaddr,
 						   priv->phydev->link);
 
-		pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
+		pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");
 
 		ret = true;
 	}
@@ -886,10 +901,10 @@ static int stmmac_set_bfsize(int mtu, int bufsize)
 		ret = BUF_SIZE_8KiB;
 	else if (mtu >= BUF_SIZE_2KiB)
 		ret = BUF_SIZE_4KiB;
-	else if (mtu >= DMA_BUFFER_SIZE)
+	else if (mtu > DEFAULT_BUFSIZE)
 		ret = BUF_SIZE_2KiB;
 	else
-		ret = DMA_BUFFER_SIZE;
+		ret = DEFAULT_BUFSIZE;
 
 	return ret;
 }
@@ -951,9 +966,9 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
 
 	p->des2 = priv->rx_skbuff_dma[i];
 
-	if ((priv->mode == STMMAC_RING_MODE) &&
+	if ((priv->hw->mode->init_desc3) &&
 	    (priv->dma_buf_sz == BUF_SIZE_16KiB))
-		priv->hw->ring->init_desc3(p);
+		priv->hw->mode->init_desc3(p);
 
 	return 0;
 }
@@ -984,11 +999,8 @@ static int init_dma_desc_rings(struct net_device *dev)
 	unsigned int bfsize = 0;
 	int ret = -ENOMEM;
 
-	/* Set the max buffer size according to the DESC mode
-	 * and the MTU. Note that RING mode allows 16KiB bsize.
-	 */
-	if (priv->mode == STMMAC_RING_MODE)
-		bfsize = priv->hw->ring->set_16kib_bfsize(dev->mtu);
+	if (priv->hw->mode->set_16kib_bfsize)
+		bfsize = priv->hw->mode->set_16kib_bfsize(dev->mtu);
 
 	if (bfsize < BUF_SIZE_16KiB)
 		bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
@@ -1029,15 +1041,15 @@ static int init_dma_desc_rings(struct net_device *dev)
 	/* Setup the chained descriptor addresses */
 	if (priv->mode == STMMAC_CHAIN_MODE) {
 		if (priv->extend_desc) {
-			priv->hw->chain->init(priv->dma_erx, priv->dma_rx_phy,
-					      rxsize, 1);
-			priv->hw->chain->init(priv->dma_etx, priv->dma_tx_phy,
-					      txsize, 1);
+			priv->hw->mode->init(priv->dma_erx, priv->dma_rx_phy,
+					     rxsize, 1);
+			priv->hw->mode->init(priv->dma_etx, priv->dma_tx_phy,
+					     txsize, 1);
 		} else {
-			priv->hw->chain->init(priv->dma_rx, priv->dma_rx_phy,
-					      rxsize, 0);
-			priv->hw->chain->init(priv->dma_tx, priv->dma_tx_phy,
-					      txsize, 0);
+			priv->hw->mode->init(priv->dma_rx, priv->dma_rx_phy,
+					     rxsize, 0);
+			priv->hw->mode->init(priv->dma_tx, priv->dma_tx_phy,
+					     txsize, 0);
 		}
 	}
 
@@ -1288,7 +1300,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
 					 DMA_TO_DEVICE);
 			priv->tx_skbuff_dma[entry] = 0;
 		}
-		priv->hw->ring->clean_desc3(priv, p);
+		priv->hw->mode->clean_desc3(priv, p);
 
 		if (likely(skb != NULL)) {
 			dev_kfree_skb(skb);
@@ -1844,6 +1856,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	int nfrags = skb_shinfo(skb)->nr_frags;
 	struct dma_desc *desc, *first;
 	unsigned int nopaged_len = skb_headlen(skb);
+	unsigned int enh_desc = priv->plat->enh_desc;
 
 	if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
 		if (!netif_queue_stopped(dev)) {
@@ -1871,27 +1884,19 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	first = desc;
 
 	/* To program the descriptors according to the size of the frame */
-	if (priv->mode == STMMAC_RING_MODE) {
-		is_jumbo = priv->hw->ring->is_jumbo_frm(skb->len,
-							priv->plat->enh_desc);
-		if (unlikely(is_jumbo))
-			entry = priv->hw->ring->jumbo_frm(priv, skb,
-							  csum_insertion);
-	} else {
-		is_jumbo = priv->hw->chain->is_jumbo_frm(skb->len,
-							 priv->plat->enh_desc);
-		if (unlikely(is_jumbo))
-			entry = priv->hw->chain->jumbo_frm(priv, skb,
-							   csum_insertion);
-	}
+	if (enh_desc)
+		is_jumbo = priv->hw->mode->is_jumbo_frm(skb->len, enh_desc);
+
 	if (likely(!is_jumbo)) {
 		desc->des2 = dma_map_single(priv->device, skb->data,
 					    nopaged_len, DMA_TO_DEVICE);
 		priv->tx_skbuff_dma[entry] = desc->des2;
 		priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
 						csum_insertion, priv->mode);
-	} else
+	} else {
 		desc = first;
+		entry = priv->hw->mode->jumbo_frm(priv, skb, csum_insertion);
+	}
 
 	for (i = 0; i < nfrags; i++) {
 		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -2029,7 +2034,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
 
 			p->des2 = priv->rx_skbuff_dma[entry];
 
-			priv->hw->ring->refill_desc3(priv, p);
+			priv->hw->mode->refill_desc3(priv, p);
 
 			if (netif_msg_rx_status(priv))
 				pr_debug("\trefill entry #%d\n", entry);
@@ -2633,11 +2638,11 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 
 	/* To use the chained or ring mode */
 	if (chain_mode) {
-		priv->hw->chain = &chain_mode_ops;
+		priv->hw->mode = &chain_mode_ops;
 		pr_info(" Chain mode enabled\n");
 		priv->mode = STMMAC_CHAIN_MODE;
 	} else {
-		priv->hw->ring = &ring_mode_ops;
+		priv->hw->mode = &ring_mode_ops;
 		pr_info(" Ring mode enabled\n");
 		priv->mode = STMMAC_RING_MODE;
 	}

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -36,7 +36,7 @@ static const struct of_device_id stmmac_dt_ids[] = {
 #ifdef CONFIG_DWMAC_STI
 	{ .compatible = "st,stih415-dwmac", .data = &sti_gmac_data},
 	{ .compatible = "st,stih416-dwmac", .data = &sti_gmac_data},
-	{ .compatible = "st,stih127-dwmac", .data = &sti_gmac_data},
+	{ .compatible = "st,stid127-dwmac", .data = &sti_gmac_data},
 #endif
 	/* SoC specific glue layers should come before generic bindings */
 	{ .compatible = "st,spear600-gmac"},