Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Updates for interrupt core and drivers:

  Core:

   - Fix a few inconsistencies between UP and SMP vs interrupt
     affinities

   - Small updates and cleanups all over the place

  New drivers:

   - LoongArch interrupt controller

   - Renesas RZ/G2L interrupt controller

  Updates:

   - Hotpath optimization for SiFive PLIC

   - Workaround for broken PLIC edge triggered interrupts

   - Simall cleanups and improvements as usual"

* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  irqchip/mmp: Declare init functions in common header file
  irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
  genirq: Use for_each_action_of_desc in actions_show()
  irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
  irqchip: Add LoongArch CPU interrupt controller support
  irqchip: Add Loongson Extended I/O interrupt controller support
  irqchip/loongson-liointc: Add ACPI init support
  irqchip/loongson-pch-msi: Add ACPI init support
  irqchip/loongson-pch-pic: Add ACPI init support
  irqchip: Add Loongson PCH LPC controller support
  LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
  LoongArch: Use ACPI_GENERIC_GSI for gsi handling
  genirq/generic_chip: Export irq_unmap_generic_chip
  ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
  APCI: irq: Add support for multiple GSI domains
  LoongArch: Provisionally add ACPICA data structures
  irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
  irqdomain: Report irq number for NOMAP domains
  irqchip/gic-v3: Fix comment typo
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
  ...

Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml

@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+          - renesas,r9a07g054-irqc    # RZ/V2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    description: The first cell should contain external interrupt number (IRQ0-7) and the
+                 second cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 41
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+            reg = <0x110a0000 0x10000>;
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+            clock-names = "clk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_IA55_RESETN>;
+    };

Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -26,9 +26,14 @@ description:
   with priority below this threshold will not cause the PLIC to raise its
   interrupt line leading to the context.
 
-  While the PLIC supports both edge-triggered and level-triggered interrupts,
-  interrupt handlers are oblivious to this distinction and therefore it is not
-  specified in the PLIC device-tree binding.
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
 
   While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
   "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
@@ -47,6 +52,10 @@ maintainers:
 properties:
   compatible:
     oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
       - items:
           - enum:
               - sifive,fu540-c000-plic
@@ -64,8 +73,7 @@ properties:
   '#address-cells':
     const: 0
 
-  '#interrupt-cells':
-    const: 1
+  '#interrupt-cells': true
 
   interrupt-controller: true
 
@@ -82,6 +90,12 @@ properties:
     description:
       Specifies how many external interrupts are supported by this controller.
 
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
 required:
   - compatible
   - '#address-cells'
@@ -91,6 +105,47 @@ required:
   - interrupts-extended
   - riscv,ndev
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml

@@ -47,6 +47,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
   clocks:
     maxItems: 1
 
@@ -110,6 +121,8 @@ required:
   - gpio-controller
   - '#gpio-cells'
   - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
   - clocks
   - power-domains
   - resets
@@ -126,6 +139,8 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
             gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
             clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
             resets = <&cpg R9A07G044_GPIO_RSTN>,
                      <&cpg R9A07G044_GPIO_PORT_RESETN>,

arch/alpha/kernel/irq.c

@@ -60,7 +60,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }

arch/arm/mach-hisi/Kconfig

@@ -40,7 +40,7 @@ config ARCH_HIP04
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
 	select MCPM_QUAD_CLUSTER if SMP
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 	help
 	  Support for Hisilicon HiP04 SoC family
 

arch/arm/mach-mmp/mmp2.h

@@ -5,13 +5,13 @@
 #include <linux/platform_data/pxa_sdhci.h>
 
 extern void mmp2_timer_init(void);
-extern void __init mmp2_init_icu(void);
 extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/dma-mmp_tdma.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 

arch/arm/mach-mmp/pxa168.h

@@ -5,7 +5,6 @@
 #include <linux/reboot.h>
 
 extern void pxa168_timer_init(void);
-extern void __init icu_init_irq(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(enum reboot_mode, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
@@ -18,6 +17,7 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
 #include <linux/soc/mmp/cputype.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 

arch/arm/mach-mmp/pxa910.h

@@ -3,13 +3,13 @@
 #define __ASM_MACH_PXA910_H
 
 extern void pxa910_timer_init(void);
-extern void __init icu_init_irq(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/mmp_disp.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 

arch/ia64/kernel/iosapic.c

@@ -834,7 +834,7 @@ iosapic_unregister_intr (unsigned int gsi)
 	if (iosapic_intr_info[irq].count == 0) {
 #ifdef CONFIG_SMP
 		/* Clear affinity */
-		cpumask_setall(irq_get_affinity_mask(irq));
+		irq_data_update_affinity(irq_get_irq_data(irq), cpu_all_mask);
 #endif
 		/* Clear the interrupt information */
 		iosapic_intr_info[irq].dest = 0;

arch/ia64/kernel/irq.c

@@ -57,8 +57,8 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 };
 void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 {
 	if (irq < NR_IRQS) {
-		cpumask_copy(irq_get_affinity_mask(irq),
-			     cpumask_of(cpu_logical_id(hwid)));
+		irq_data_update_affinity(irq_get_irq_data(irq),
+					 cpumask_of(cpu_logical_id(hwid)));
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }

arch/ia64/kernel/msi_ia64.c

@@ -37,7 +37,7 @@ static int ia64_set_msi_irq_affinity(struct irq_data *idata,
 	msg.data = data;
 
 	pci_write_msi_msg(irq, &msg);
-	cpumask_copy(irq_data_get_affinity_mask(idata), cpumask_of(cpu));
+	irq_data_update_affinity(idata, cpumask_of(cpu));
 
 	return 0;
 }
@@ -132,7 +132,7 @@ static int dmar_msi_set_affinity(struct irq_data *data,
 	msg.address_lo |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
 
 	dmar_msi_write(irq, &msg);
-	cpumask_copy(irq_data_get_affinity_mask(data), mask);
+	irq_data_update_affinity(data, mask);
 
 	return 0;
 }

arch/loongarch/Kconfig

@@ -2,6 +2,7 @@
 config LOONGARCH
 	bool
 	default y
+	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
 	select ARCH_BINFMT_ELF_STATE
 	select ARCH_ENABLE_MEMORY_HOTPLUG