arm64: dts: Add HDLCD support on Juno platforms

ARM's Juno platforms have two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -114,8 +114,8 @@
 			scpi_clk: scpi_clocks@3 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
-				clock-indices = <3>, <4>;
-				clock-output-names = "pxlclk0", "pxlclk1";
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
 			};
 		};
 
@@ -145,6 +145,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint@0 {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint@0 {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -163,14 +191,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter@70 {
+		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint@0 {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter@71 {
+		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint@0 {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};