Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/clk/linux

Pull clk driver fixes from Stephen Boyd:

 - Make the regulator state match the GDSC power domain state at boot on
   Qualcomm SoCs so that the regulator isn't turned off inadvertently.

 - Fix earlycon on i.MX6Q SoCs

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gdsc: Ensure regulator init state matches GDSC state
  clk: imx6q: fix uart earlycon unwork

drivers/clk/imx/clk-imx6q.c

@@ -974,6 +974,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 			       hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk);
 	}
 
-	imx_register_uart_clocks(1);
+	imx_register_uart_clocks(2);
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);

drivers/clk/qcom/gdsc.c

@@ -357,34 +357,52 @@ static int gdsc_init(struct gdsc *sc)
 	if (on < 0)
 		return on;
 
-	/*
-	 * Votable GDSCs can be ON due to Vote from other masters.
-	 * If a Votable GDSC is ON, make sure we have a Vote.
-	 */
-	if ((sc->flags & VOTABLE) && on)
-		gdsc_enable(&sc->pd);
+	if (on) {
+		/* The regulator must be on, sync the kernel state */
+		if (sc->rsupply) {
+			ret = regulator_enable(sc->rsupply);
+			if (ret < 0)
+				return ret;
+		}
 
-	/*
-	 * Make sure the retain bit is set if the GDSC is already on, otherwise
-	 * we end up turning off the GDSC and destroying all the register
-	 * contents that we thought we were saving.
-	 */
-	if ((sc->flags & RETAIN_FF_ENABLE) && on)
-		gdsc_retain_ff_on(sc);
+		/*
+		 * Votable GDSCs can be ON due to Vote from other masters.
+		 * If a Votable GDSC is ON, make sure we have a Vote.
+		 */
+		if (sc->flags & VOTABLE) {
+			ret = regmap_update_bits(sc->regmap, sc->gdscr,
+						 SW_COLLAPSE_MASK, val);
+			if (ret)
+				return ret;
+		}
+
+		/* Turn on HW trigger mode if supported */
+		if (sc->flags & HW_CTRL) {
+			ret = gdsc_hwctrl(sc, true);
+			if (ret < 0)
+				return ret;
+		}
 
-	/* If ALWAYS_ON GDSCs are not ON, turn them ON */
-	if (sc->flags & ALWAYS_ON) {
-		if (!on)
-			gdsc_enable(&sc->pd);
+		/*
+		 * Make sure the retain bit is set if the GDSC is already on,
+		 * otherwise we end up turning off the GDSC and destroying all
+		 * the register contents that we thought we were saving.
+		 */
+		if (sc->flags & RETAIN_FF_ENABLE)
+			gdsc_retain_ff_on(sc);
+	} else if (sc->flags & ALWAYS_ON) {
+		/* If ALWAYS_ON GDSCs are not ON, turn them ON */
+		gdsc_enable(&sc->pd);
 		on = true;
-		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	}
 
 	if (on || (sc->pwrsts & PWRSTS_RET))
 		gdsc_force_mem_on(sc);
 	else
 		gdsc_clear_mem_on(sc);
 
+	if (sc->flags & ALWAYS_ON)
+		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	if (!sc->pd.power_off)
 		sc->pd.power_off = gdsc_disable;
 	if (!sc->pd.power_on)