tools/bpf: Remove bpf-helpers from bpftool docs

This logic is used for validating the manual pages from selftests, so
move the infra under tools/testing/selftests/bpf/ and rely on selftests
for validation rather than tying it into the bpftool build.

Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-12-joe@cilium.io

tools/bpf/bpftool/.gitignore

@@ -3,7 +3,6 @@
 /bootstrap/
 /bpftool
 bpftool*.8
-bpf-helpers.*
 FEATURE-DUMP.bpftool
 feature
 libbpf

tools/bpf/bpftool/Documentation/Makefile

@@ -16,15 +16,12 @@ prefix ?= /usr/local
 mandir ?= $(prefix)/man
 man8dir = $(mandir)/man8
 
-# Load targets for building eBPF helpers man page.
-include ../../Makefile.helpers
-
 MAN8_RST = $(wildcard bpftool*.rst)
 
 _DOC_MAN8 = $(patsubst %.rst,%.8,$(MAN8_RST))
 DOC_MAN8 = $(addprefix $(OUTPUT),$(_DOC_MAN8))
 
-man: man8 helpers
+man: man8
 man8: $(DOC_MAN8)
 
 RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null)
@@ -46,16 +43,16 @@ ifndef RST2MAN_DEP
 endif
 	$(QUIET_GEN)( cat $< ; printf "%b" $(call see_also,$<) ) | rst2man $(RST2MAN_OPTS) > $@
 
-clean: helpers-clean
+clean:
 	$(call QUIET_CLEAN, Documentation)
 	$(Q)$(RM) $(DOC_MAN8)
 
-install: man helpers-install
+install: man
 	$(call QUIET_INSTALL, Documentation-man)
 	$(Q)$(INSTALL) -d -m 755 $(DESTDIR)$(man8dir)
 	$(Q)$(INSTALL) -m 644 $(DOC_MAN8) $(DESTDIR)$(man8dir)
 
-uninstall: helpers-uninstall
+uninstall:
 	$(call QUIET_UNINST, Documentation-man)
 	$(Q)$(RM) $(addprefix $(DESTDIR)$(man8dir)/,$(_DOC_MAN8))
 	$(Q)$(RMDIR) $(DESTDIR)$(man8dir)

tools/testing/selftests/bpf/.gitignore

@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
+bpf-helpers*
 test_verifier
 test_maps
 test_lru_map

tools/testing/selftests/bpf/Makefile

@@ -68,6 +68,7 @@ TEST_PROGS := test_kmod.sh \
 	test_bpftool_build.sh \
 	test_bpftool.sh \
 	test_bpftool_metadata.sh \
+	test_docs_build.sh \
 	test_xsk.sh
 
 TEST_PROGS_EXTENDED := with_addr.sh \
@@ -103,6 +104,7 @@ override define CLEAN
 	$(call msg,CLEAN)
 	$(Q)$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
 	$(Q)$(MAKE) -C bpf_testmod clean
+	$(Q)$(MAKE) docs-clean
 endef
 
 include ../lib.mk
@@ -180,6 +182,7 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL)
 		    cp $(SCRATCH_DIR)/runqslower $@
 
 $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
+$(TEST_GEN_FILES): docs
 
 $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
 $(OUTPUT)/test_skb_cgroup_id_user: cgroup_helpers.c
@@ -200,11 +203,16 @@ $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile)    \
 		    CC=$(HOSTCC) LD=$(HOSTLD)				       \
 		    OUTPUT=$(HOST_BUILD_DIR)/bpftool/			       \
 		    prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install
-	$(Q)mkdir -p $(BUILD_DIR)/bpftool/Documentation
-	$(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras)	       \
-		    -C $(BPFTOOLDIR)/Documentation			       \
-		    OUTPUT=$(BUILD_DIR)/bpftool/Documentation/		       \
-		    prefix= DESTDIR=$(SCRATCH_DIR)/ install
+
+docs:
+	$(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras)	\
+	            -f Makefile.docs					\
+	            prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@
+
+docs-clean:
+	$(Q)$(MAKE) $(submake_extras)					\
+	            -f Makefile.docs					\
+	            prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@
 
 $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)		       \
 	   ../../../include/uapi/linux/bpf.h                                   \
@@ -477,3 +485,5 @@ EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR)	\
 	prog_tests/tests.h map_tests/tests.h verifier/tests.h		\
 	feature								\
 	$(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc bpf_testmod.ko)
+
+.PHONY: docs docs-clean

tools/bpf/Makefile.helpers → tools/testing/selftests/bpf/Makefile.docs

@@ -1,13 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
-ifndef allow-override
-  include ../scripts/Makefile.include
-  include ../scripts/utilities.mak
-else
-  # Assume Makefile.helpers is being run from bpftool/Documentation
-  # subdirectory. Go up two more directories to fetch bpf.h header and
-  # associated script.
-  UP2DIR := ../../
-endif
+
+include ../../../scripts/Makefile.include
+include ../../../scripts/utilities.mak
 
 INSTALL ?= install
 RM ?= rm -f
@@ -29,32 +23,40 @@ MAN7_RST = $(HELPERS_RST)
 _DOC_MAN7 = $(patsubst %.rst,%.7,$(MAN7_RST))
 DOC_MAN7 = $(addprefix $(OUTPUT),$(_DOC_MAN7))
 
+DOCTARGETS := helpers
+
+docs: $(DOCTARGETS)
 helpers: man7
 man7: $(DOC_MAN7)
 
 RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null)
 
-$(OUTPUT)$(HELPERS_RST): $(UP2DIR)../../include/uapi/linux/bpf.h
-	$(QUIET_GEN)$(UP2DIR)../../scripts/bpf_doc.py --filename $< > $@
+# Configure make rules for the man page bpf-$1.$2.
+# $1 - target for scripts/bpf_doc.py
+# $2 - man page section to generate the troff file
+define DOCS_RULES =
+$(OUTPUT)bpf-$1.rst: ../../../../include/uapi/linux/bpf.h
+	$$(QUIET_GEN)../../../../scripts/bpf_doc.py $1 \
+		--filename $$< > $$@
 
 $(OUTPUT)%.7: $(OUTPUT)%.rst
 ifndef RST2MAN_DEP
 	$(error "rst2man not found, but required to generate man pages")
 endif
 	$(QUIET_GEN)rst2man $< > $@
 
-helpers-clean:
+docs-clean:
 	$(call QUIET_CLEAN, eBPF_helpers-manpage)
 	$(Q)$(RM) $(DOC_MAN7) $(OUTPUT)$(HELPERS_RST)
 
-helpers-install: helpers
+docs-install: helpers
 	$(call QUIET_INSTALL, eBPF_helpers-manpage)
 	$(Q)$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir)
 	$(Q)$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
 
-helpers-uninstall:
+docs-uninstall:
 	$(call QUIET_UNINST, eBPF_helpers-manpage)
 	$(Q)$(RM) $(addprefix $(DESTDIR)$(man7dir)/,$(_DOC_MAN7))
 	$(Q)$(RMDIR) $(DESTDIR)$(man7dir)
 
-.PHONY: helpers helpers-clean helpers-install helpers-uninstall
+.PHONY: docs docs-clean docs-install docs-uninstall

tools/testing/selftests/bpf/test_bpftool_build.sh

@@ -85,23 +85,6 @@ make_with_tmpdir() {
 	echo
 }
 
-make_doc_and_clean() {
-	echo -e "\$PWD:    $PWD"
-	echo -e "command: make -s $* doc >/dev/null"
-	RST2MAN_OPTS="--exit-status=1" make $J -s $* doc
-	if [ $? -ne 0 ] ; then
-		ERROR=1
-		printf "FAILURE: Errors or warnings when building documentation\n"
-	fi
-	(
-		if [ $# -ge 1 ] ; then
-			cd ${@: -1}
-		fi
-		make -s doc-clean
-	)
-	echo
-}
-
 echo "Trying to build bpftool"
 echo -e "... through kbuild\n"
 
@@ -162,7 +145,3 @@ make_and_clean
 make_with_tmpdir OUTPUT
 
 make_with_tmpdir O
-
-echo -e "Checking documentation build\n"
-# From tools/bpf/bpftool
-make_doc_and_clean

tools/testing/selftests/bpf/test_doc_build.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+# Assume script is located under tools/testing/selftests/bpf/. We want to start
+# build attempts from the top of kernel repository.
+SCRIPT_REL_PATH=$(realpath --relative-to=$PWD $0)
+SCRIPT_REL_DIR=$(dirname $SCRIPT_REL_PATH)
+KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
+cd $KDIR_ROOT_DIR
+
+for tgt in docs docs-clean; do
+	make -s -C $PWD/$SCRIPT_REL_DIR $tgt;
+done