s390/dasd: Make dasd_setup_queue() a discipline function

ECKD, FBA, and the DIAG discipline use slightly different block layer
settings. In preparation of even more diverse queue settings, make
dasd_setup_queue() a discipline function.

Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

drivers/s390/block/dasd.c

@@ -70,7 +70,6 @@ MODULE_LICENSE("GPL");
  * SECTION: prototypes for static functions of dasd.c
  */
 static int  dasd_alloc_queue(struct dasd_block *);
-static void dasd_setup_queue(struct dasd_block *);
 static void dasd_free_queue(struct dasd_block *);
 static int dasd_flush_block_queue(struct dasd_block *);
 static void dasd_device_tasklet(unsigned long);
@@ -358,7 +357,8 @@ static int dasd_state_basic_to_ready(struct dasd_device *device)
 			}
 			return rc;
 		}
-		dasd_setup_queue(block);
+		if (device->discipline->setup_blk_queue)
+			device->discipline->setup_blk_queue(block);
 		set_capacity(block->gdp,
 			     block->blocks << block->s2b_shift);
 		device->state = DASD_STATE_READY;
@@ -3249,55 +3249,6 @@ static int dasd_alloc_queue(struct dasd_block *block)
 	return 0;
 }
 
-/*
- * Allocate and initialize request queue.
- */
-static void dasd_setup_queue(struct dasd_block *block)
-{
-	unsigned int logical_block_size = block->bp_block;
-	struct request_queue *q = block->request_queue;
-	unsigned int max_bytes, max_discard_sectors;
-	int max;
-
-	if (block->base->features & DASD_FEATURE_USERAW) {
-		/*
-		 * the max_blocks value for raw_track access is 256
-		 * it is higher than the native ECKD value because we
-		 * only need one ccw per track
-		 * so the max_hw_sectors are
-		 * 2048 x 512B = 1024kB = 16 tracks
-		 */
-		max = 2048;
-	} else {
-		max = block->base->discipline->max_blocks << block->s2b_shift;
-	}
-	blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
-	q->limits.max_dev_sectors = max;
-	blk_queue_logical_block_size(q, logical_block_size);
-	blk_queue_max_hw_sectors(q, max);
-	blk_queue_max_segments(q, USHRT_MAX);
-	/* with page sized segments we can translate each segement into
-	 * one idaw/tidaw
-	 */
-	blk_queue_max_segment_size(q, PAGE_SIZE);
-	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
-
-	/* Only activate blocklayer discard support for devices that support it */
-	if (block->base->features & DASD_FEATURE_DISCARD) {
-		q->limits.discard_granularity = logical_block_size;
-		q->limits.discard_alignment = PAGE_SIZE;
-
-		/* Calculate max_discard_sectors and make it PAGE aligned */
-		max_bytes = USHRT_MAX * logical_block_size;
-		max_bytes = ALIGN(max_bytes, PAGE_SIZE) - PAGE_SIZE;
-		max_discard_sectors = max_bytes / logical_block_size;
-
-		blk_queue_max_discard_sectors(q, max_discard_sectors);
-		blk_queue_max_write_zeroes_sectors(q, max_discard_sectors);
-		blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
-	}
-}
-
 /*
  * Deactivate and free request queue.
  */

drivers/s390/block/dasd_diag.c

@@ -615,14 +615,34 @@ dasd_diag_dump_sense(struct dasd_device *device, struct dasd_ccw_req * req,
 		    "dump sense not available for DIAG data");
 }
 
+/*
+ * Initialize block layer request queue.
+ */
+static void dasd_diag_setup_blk_queue(struct dasd_block *block)
+{
+	unsigned int logical_block_size = block->bp_block;
+	struct request_queue *q = block->request_queue;
+	int max;
+
+	max = DIAG_MAX_BLOCKS << block->s2b_shift;
+	blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
+	q->limits.max_dev_sectors = max;
+	blk_queue_logical_block_size(q, logical_block_size);
+	blk_queue_max_hw_sectors(q, max);
+	blk_queue_max_segments(q, USHRT_MAX);
+	/* With page sized segments each segment can be translated into one idaw/tidaw */
+	blk_queue_max_segment_size(q, PAGE_SIZE);
+	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
+}
+
 static struct dasd_discipline dasd_diag_discipline = {
 	.owner = THIS_MODULE,
 	.name = "DIAG",
 	.ebcname = "DIAG",
-	.max_blocks = DIAG_MAX_BLOCKS,
 	.check_device = dasd_diag_check_device,
 	.verify_path = dasd_generic_verify_path,
 	.fill_geometry = dasd_diag_fill_geometry,
+	.setup_blk_queue = dasd_diag_setup_blk_queue,
 	.start_IO = dasd_start_diag,
 	.term_IO = dasd_diag_term_IO,
 	.handle_terminated_request = dasd_diag_handle_terminated_request,

drivers/s390/block/dasd_eckd.c

@@ -6349,6 +6349,38 @@ static void dasd_eckd_handle_hpf_error(struct dasd_device *device,
 	dasd_schedule_requeue(device);
 }
 
+/*
+ * Initialize block layer request queue.
+ */
+static void dasd_eckd_setup_blk_queue(struct dasd_block *block)
+{
+	unsigned int logical_block_size = block->bp_block;
+	struct request_queue *q = block->request_queue;
+	struct dasd_device *device = block->base;
+	int max;
+
+	if (device->features & DASD_FEATURE_USERAW) {
+		/*
+		 * the max_blocks value for raw_track access is 256
+		 * it is higher than the native ECKD value because we
+		 * only need one ccw per track
+		 * so the max_hw_sectors are
+		 * 2048 x 512B = 1024kB = 16 tracks
+		 */
+		max = DASD_ECKD_MAX_BLOCKS_RAW << block->s2b_shift;
+	} else {
+		max = DASD_ECKD_MAX_BLOCKS << block->s2b_shift;
+	}
+	blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
+	q->limits.max_dev_sectors = max;
+	blk_queue_logical_block_size(q, logical_block_size);
+	blk_queue_max_hw_sectors(q, max);
+	blk_queue_max_segments(q, USHRT_MAX);
+	/* With page sized segments each segment can be translated into one idaw/tidaw */
+	blk_queue_max_segment_size(q, PAGE_SIZE);
+	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
+}
+
 static struct ccw_driver dasd_eckd_driver = {
 	.driver = {
 		.name	= "dasd-eckd",
@@ -6369,31 +6401,18 @@ static struct ccw_driver dasd_eckd_driver = {
 	.int_class   = IRQIO_DAS,
 };
 
-/*
- * max_blocks is dependent on the amount of storage that is available
- * in the static io buffer for each device. Currently each device has
- * 8192 bytes (=2 pages). For 64 bit one dasd_mchunkt_t structure has
- * 24 bytes, the struct dasd_ccw_req has 136 bytes and each block can use
- * up to 16 bytes (8 for the ccw and 8 for the idal pointer). In
- * addition we have one define extent ccw + 16 bytes of data and one
- * locate record ccw + 16 bytes of data. That makes:
- * (8192 - 24 - 136 - 8 - 16 - 8 - 16) / 16 = 499 blocks at maximum.
- * We want to fit two into the available memory so that we can immediately
- * start the next request if one finishes off. That makes 249.5 blocks
- * for one request. Give a little safety and the result is 240.
- */
 static struct dasd_discipline dasd_eckd_discipline = {
 	.owner = THIS_MODULE,
 	.name = "ECKD",
 	.ebcname = "ECKD",
-	.max_blocks = 190,
 	.check_device = dasd_eckd_check_characteristics,
 	.uncheck_device = dasd_eckd_uncheck_device,
 	.do_analysis = dasd_eckd_do_analysis,
 	.verify_path = dasd_eckd_verify_path,
 	.basic_to_ready = dasd_eckd_basic_to_ready,
 	.online_to_ready = dasd_eckd_online_to_ready,
 	.basic_to_known = dasd_eckd_basic_to_known,
+	.setup_blk_queue = dasd_eckd_setup_blk_queue,
 	.fill_geometry = dasd_eckd_fill_geometry,
 	.start_IO = dasd_start_IO,
 	.term_IO = dasd_term_IO,

drivers/s390/block/dasd_eckd.h

@@ -109,6 +109,12 @@
 #define DASD_ECKD_PATH_THRHLD		 256
 #define DASD_ECKD_PATH_INTERVAL		 300
 
+/*
+ * Maximum number of blocks to be chained
+ */
+#define DASD_ECKD_MAX_BLOCKS		 190
+#define DASD_ECKD_MAX_BLOCKS_RAW	 256
+
 /*****************************************************************************
  * SECTION: Type Definitions
  ****************************************************************************/

drivers/s390/block/dasd_fba.c

@@ -770,27 +770,46 @@ dasd_fba_dump_sense(struct dasd_device *device, struct dasd_ccw_req * req,
 }
 
 /*
- * max_blocks is dependent on the amount of storage that is available
- * in the static io buffer for each device. Currently each device has
- * 8192 bytes (=2 pages). For 64 bit one dasd_mchunkt_t structure has
- * 24 bytes, the struct dasd_ccw_req has 136 bytes and each block can use
- * up to 16 bytes (8 for the ccw and 8 for the idal pointer). In
- * addition we have one define extent ccw + 16 bytes of data and a
- * locate record ccw for each block (stupid devices!) + 16 bytes of data.
- * That makes:
- * (8192 - 24 - 136 - 8 - 16) / 40 = 200.2 blocks at maximum.
- * We want to fit two into the available memory so that we can immediately
- * start the next request if one finishes off. That makes 100.1 blocks
- * for one request. Give a little safety and the result is 96.
+ * Initialize block layer request queue.
  */
+static void dasd_fba_setup_blk_queue(struct dasd_block *block)
+{
+	unsigned int logical_block_size = block->bp_block;
+	struct request_queue *q = block->request_queue;
+	unsigned int max_bytes, max_discard_sectors;
+	int max;
+
+	max = DASD_FBA_MAX_BLOCKS << block->s2b_shift;
+	blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
+	q->limits.max_dev_sectors = max;
+	blk_queue_logical_block_size(q, logical_block_size);
+	blk_queue_max_hw_sectors(q, max);
+	blk_queue_max_segments(q, USHRT_MAX);
+	/* With page sized segments each segment can be translated into one idaw/tidaw */
+	blk_queue_max_segment_size(q, PAGE_SIZE);
+	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
+
+	q->limits.discard_granularity = logical_block_size;
+	q->limits.discard_alignment = PAGE_SIZE;
+
+	/* Calculate max_discard_sectors and make it PAGE aligned */
+	max_bytes = USHRT_MAX * logical_block_size;
+	max_bytes = ALIGN(max_bytes, PAGE_SIZE) - PAGE_SIZE;
+	max_discard_sectors = max_bytes / logical_block_size;
+
+	blk_queue_max_discard_sectors(q, max_discard_sectors);
+	blk_queue_max_write_zeroes_sectors(q, max_discard_sectors);
+	blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+}
+
 static struct dasd_discipline dasd_fba_discipline = {
 	.owner = THIS_MODULE,
 	.name = "FBA ",
 	.ebcname = "FBA ",
-	.max_blocks = 96,
 	.check_device = dasd_fba_check_characteristics,
 	.do_analysis = dasd_fba_do_analysis,
 	.verify_path = dasd_generic_verify_path,
+	.setup_blk_queue = dasd_fba_setup_blk_queue,
 	.fill_geometry = dasd_fba_fill_geometry,
 	.start_IO = dasd_start_IO,
 	.term_IO = dasd_term_IO,

drivers/s390/block/dasd_fba.h

@@ -9,6 +9,11 @@
 #ifndef DASD_FBA_H
 #define DASD_FBA_H
 
+/*
+ * Maximum number of blocks to be chained
+ */
+#define DASD_FBA_MAX_BLOCKS		96
+
 struct DE_fba_data {
 	struct {
 		unsigned char perm:2;	/* Permissions on this extent */

drivers/s390/block/dasd_int.h

@@ -268,7 +268,6 @@ struct dasd_discipline {
 	struct module *owner;
 	char ebcname[8];	/* a name used for tagging and printks */
 	char name[8];		/* a name used for tagging and printks */
-	int max_blocks;		/* maximum number of blocks to be chained */
 
 	struct list_head list;	/* used for list of disciplines */
 
@@ -307,6 +306,10 @@ struct dasd_discipline {
 	int (*online_to_ready) (struct dasd_device *);
 	int (*basic_to_known)(struct dasd_device *);
 
+	/*
+	 * Initialize block layer request queue.
+	 */
+	void (*setup_blk_queue)(struct dasd_block *);
 	/* (struct dasd_device *);
 	 * Device operation functions. build_cp creates a ccw chain for
 	 * a block device request, start_io starts the request and