NFC: Add Intel Fields Peak NFC solution driver

Fields Peak complies with the ISO/IEC 14443A/B, 15693, 18092,
and JIS X 6319-4. It is an NCI based controller.

RF Protocols supported:
 - NFC Forum Type 1 Tags (Jewel, Topaz)
 - NFC Forum Type 2 Tags (Mifare UL)
 - NFC Forum Type 3 Tags (FeliCa)
 - NFC Forum Type 4A (ISO/IEC 14443 A-4 106kbps to 848kbps)
 - NFC Forum Type 4B (ISO/IEC 14443 B-4 106kbps to 848kbps)
 - NFCIP in passive and active modes (ISO/IEC 18092 106kbps
   to 424kbps)
 - B’ (based on ISO/IEC 14443 B-2)
 - iCLASS (based on ISO/IEC 15693-2)
 - Vicinity cards (ISO/IEC 15693-3)
 - Kovio tags (NFC Forum Type 2)

The device can be enumerated using ACPI using the id INT339A.
The 1st GPIO is the IRQ and the 2nd is the RESET pin.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/nfc/Kconfig

@@ -68,6 +68,7 @@ config NFC_PORT100
 
 	  If unsure, say N.
 
+source "drivers/nfc/fdp/Kconfig"
 source "drivers/nfc/pn544/Kconfig"
 source "drivers/nfc/microread/Kconfig"
 source "drivers/nfc/nfcmrvl/Kconfig"

drivers/nfc/Makefile

@@ -2,6 +2,7 @@
 # Makefile for nfc devices
 #
 
+obj-$(CONFIG_NFC_FDP)		+= fdp/
 obj-$(CONFIG_NFC_PN544)		+= pn544/
 obj-$(CONFIG_NFC_MICROREAD)	+= microread/
 obj-$(CONFIG_NFC_PN533)		+= pn533.o

drivers/nfc/fdp/Kconfig

@@ -0,0 +1,23 @@
+config NFC_FDP
+	tristate "Intel FDP NFC driver"
+	depends on NFC_NCI
+	select CRC_CCITT
+	default n
+	---help---
+	  Intel Fields Peak NFC controller core driver.
+	  This is a driver based on the NCI NFC kernel layers.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called fdp.
+	  Say N if unsure.
+
+config NFC_FDP_I2C
+	tristate "NFC FDP i2c support"
+	depends on NFC_FDP && I2C
+	---help---
+	  This module adds support for the Intel Fields Peak NFC controller
+	  i2c interface.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called fdp_i2c.
+	  Say N if unsure.

drivers/nfc/fdp/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile for FDP NCI based NFC driver
+#
+
+obj-$(CONFIG_NFC_FDP)     += fdp.o
+obj-$(CONFIG_NFC_FDP_I2C) += fdp_i2c.o
+
+fdp_i2c-objs  = i2c.o
+