Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
  ALSA: jack - Use card->shortname for input name
  ALSA: usb-audio - Workaround for misdetected sample rate with CM6207
  ALSA: usb-audio - Fix non-continuous rate detection
  sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
  Revert "Sound: hda - Restore PCI configuration space with interrupts off"

sound/core/jack.c

@@ -47,7 +47,7 @@ static int snd_jack_dev_register(struct snd_device *device)
 	int err;
 
 	snprintf(jack->name, sizeof(jack->name), "%s %s",
-		 card->longname, jack->id);
+		 card->shortname, jack->id);
 	jack->input_dev->name = jack->name;
 
 	/* Default to the sound card device. */

sound/pci/hda/hda_intel.c

@@ -1947,16 +1947,13 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state)
 	return 0;
 }
 
-static int azx_resume_early(struct pci_dev *pci)
-{
-	return pci_restore_state(pci);
-}
-
 static int azx_resume(struct pci_dev *pci)
 {
 	struct snd_card *card = pci_get_drvdata(pci);
 	struct azx *chip = card->private_data;
 
+	pci_set_power_state(pci, PCI_D0);
+	pci_restore_state(pci);
 	if (pci_enable_device(pci) < 0) {
 		printk(KERN_ERR "hda-intel: pci_enable_device failed, "
 		       "disabling device\n");
@@ -2468,7 +2465,6 @@ static struct pci_driver driver = {
 	.remove = __devexit_p(azx_remove),
 #ifdef CONFIG_PM
 	.suspend = azx_suspend,
-	.resume_early = azx_resume_early,
 	.resume = azx_resume,
 #endif
 };

sound/pci/oxygen/virtuoso.c

@@ -26,7 +26,7 @@
  * SPI 0 -> 1st PCM1796 (front)
  * SPI 1 -> 2nd PCM1796 (surround)
  * SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
+ * SPI 4 -> 4th PCM1796 (back)
  *
  * GPIO 2 -> M0 of CS5381
  * GPIO 3 -> M1 of CS5381
@@ -207,12 +207,6 @@ static void xonar_gpio_changed(struct oxygen *chip);
 static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
 				     u8 reg, u8 value)
 {
-	/*
-	 * We don't want to do writes on SPI 4 because the EEPROM, which shares
-	 * the same pin, might get confused and broken.  We'd better take care
-	 * that the driver works with the default register values ...
-	 */
-#if 0
 	/* maps ALSA channel pair number to SPI output */
 	static const u8 codec_map[4] = {
 		0, 1, 2, 4
@@ -223,7 +217,6 @@ static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
 			 (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
 			 (reg << 8) | value);
-#endif
 }
 
 static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -757,9 +750,6 @@ static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -12700, 100, 0);
 
 static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
 {
-	if (!strncmp(template->name, "Master Playback ", 16))
-		/* disable volume/mute because they would require SPI writes */
-		return 1;
 	if (!strncmp(template->name, "CD Capture ", 11))
 		/* CD in is actually connected to the video in pin */
 		template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -850,8 +840,9 @@ static const struct oxygen_model model_xonar_d2 = {
 	.dac_volume_min = 0x0f,
 	.dac_volume_max = 0xff,
 	.misc_flags = OXYGEN_MISC_MIDI,
-	.function_flags = OXYGEN_FUNCTION_SPI,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
+	.function_flags = OXYGEN_FUNCTION_SPI |
+			  OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 };
 

sound/usb/usbaudio.c

@@ -2524,32 +2524,34 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
 		 * build the rate table and bitmap flags
 		 */
 		int r, idx;
-		unsigned int nonzero_rates = 0;
 
 		fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
 		if (fp->rate_table == NULL) {
 			snd_printk(KERN_ERR "cannot malloc\n");
 			return -1;
 		}
 
-		fp->nr_rates = nr_rates;
-		fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
+		fp->nr_rates = 0;
+		fp->rate_min = fp->rate_max = 0;
 		for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
 			unsigned int rate = combine_triple(&fmt[idx]);
+			if (!rate)
+				continue;
 			/* C-Media CM6501 mislabels its 96 kHz altsetting */
 			if (rate == 48000 && nr_rates == 1 &&
-			    chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+			    (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
+			     chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
 			    fp->altsetting == 5 && fp->maxpacksize == 392)
 				rate = 96000;
-			fp->rate_table[r] = rate;
-			nonzero_rates |= rate;
-			if (rate < fp->rate_min)
+			fp->rate_table[fp->nr_rates] = rate;
+			if (!fp->rate_min || rate < fp->rate_min)
 				fp->rate_min = rate;
-			else if (rate > fp->rate_max)
+			if (!fp->rate_max || rate > fp->rate_max)
 				fp->rate_max = rate;
 			fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+			fp->nr_rates++;
 		}
-		if (!nonzero_rates) {
+		if (!fp->nr_rates) {
 			hwc_debug("All rates were zero. Skipping format!\n");
 			return -1;
 		}

sound/usb/usbmidi.c

@@ -1625,6 +1625,7 @@ static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi* umidi,
 	}
 
 	ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	ep_info.out_interval = 0;
 	ep_info.out_cables = endpoint->out_cables & 0x5555;
 	err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
 	if (err < 0)