Merge branch 'fix/asoc' into for-linus

sound/soc/blackfin/Kconfig

@@ -7,15 +7,6 @@ config SND_BF5XX_I2S
 	  mode (supports single stereo In/Out).
 	  You will also need to select the audio interfaces to support below.
 
-config SND_BF5XX_TDM
-	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
-	depends on (BLACKFIN && SND_SOC)
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the Blackfin SPORT (synchronous serial ports) interface in TDM
-	  mode.
-	  You will also need to select the audio interfaces to support below.
-
 config SND_BF5XX_SOC_SSM2602
 	tristate "SoC SSM2602 Audio support for BF52x ezkit"
 	depends on SND_BF5XX_I2S
@@ -41,6 +32,31 @@ config SND_BFIN_AD73311_SE
 	  Enter the GPIO used to control AD73311's SE pin. Acceptable
 	  values are 0 to 7
 
+config SND_BF5XX_TDM
+	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+	depends on (BLACKFIN && SND_SOC)
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Blackfin SPORT (synchronous serial ports) interface in TDM
+	  mode.
+	  You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_AD1836
+	tristate "SoC AD1836 Audio support for BF5xx"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1836
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD1938
+	tristate "SoC AD1938 Audio support for Blackfin"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1938
+	help
+	  Say Y if you want to add support for AD1938 codec on Blackfin.
+
 config SND_BF5XX_AC97
 	tristate "SoC AC97 Audio for the ADI BF5xx chip"
 	depends on BLACKFIN
@@ -71,6 +87,30 @@ config SND_BF5XX_MULTICHAN_SUPPORT
 	  Say y if you want AC97 driver to support up to 5.1 channel audio.
 	  this mode will consume much more memory for DMA.
 
+config SND_BF5XX_HAVE_COLD_RESET
+	bool "BOARD has COLD Reset GPIO"
+	depends on SND_BF5XX_AC97
+	default y if BFIN548_EZKIT
+	default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+	int "Set a GPIO for cold reset"
+	depends on SND_BF5XX_HAVE_COLD_RESET
+	range 0 159
+	default 19 if BFIN548_EZKIT
+	default 5 if BFIN537_STAMP
+	default 0
+	help
+	  Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+	tristate "SoC AD1980/1 Audio support for BF5xx"
+	depends on SND_BF5XX_AC97
+	select SND_BF5XX_SOC_AC97
+	select SND_SOC_AD1980
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
 config SND_BF5XX_SOC_SPORT
 	tristate
 
@@ -88,30 +128,6 @@ config SND_BF5XX_SOC_AC97
 	select SND_SOC_AC97_BUS
 	select SND_BF5XX_SOC_SPORT
 
-config SND_BF5XX_SOC_AD1836
-	tristate "SoC AD1836 Audio support for BF5xx"
-	depends on SND_BF5XX_TDM
-	select SND_BF5XX_SOC_TDM
-	select SND_SOC_AD1836
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1980
-	tristate "SoC AD1980/1 Audio support for BF5xx"
-	depends on SND_BF5XX_AC97
-	select SND_BF5XX_SOC_AC97
-	select SND_SOC_AD1980
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1938
-        tristate "SoC AD1938 Audio support for Blackfin"
-        depends on SND_BF5XX_TDM
-        select SND_BF5XX_SOC_TDM
-        select SND_SOC_AD1938
-        help
-          Say Y if you want to add support for AD1938 codec on Blackfin.
-
 config SND_BF5XX_SPORT_NUM
 	int "Set a SPORT for Sound chip"
 	depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
@@ -120,19 +136,3 @@ config SND_BF5XX_SPORT_NUM
 	default 0
 	help
 	  Set the correct SPORT for sound chip.
-
-config SND_BF5XX_HAVE_COLD_RESET
-	bool "BOARD has COLD Reset GPIO"
-	depends on SND_BF5XX_AC97
-	default y if BFIN548_EZKIT
-	default n if !BFIN548_EZKIT
-
-config SND_BF5XX_RESET_GPIO_NUM
-	int "Set a GPIO for cold reset"
-	depends on SND_BF5XX_HAVE_COLD_RESET
-	range 0 159
-	default 19 if BFIN548_EZKIT
-	default 5 if BFIN537_STAMP
-	default 0
-	help
-	  Set the correct GPIO for RESET the sound chip.

sound/soc/blackfin/bf5xx-ac97.c

@@ -277,7 +277,11 @@ static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
 	if (!dai->active)
 		return 0;
 
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+	ret = sport_set_multichannel(sport, 16, 0x3FF, 1);
+#else
 	ret = sport_set_multichannel(sport, 16, 0x1F, 1);
+#endif
 	if (ret) {
 		pr_err("SPORT is busy!\n");
 		return -EBUSY;
@@ -334,7 +338,11 @@ static int bf5xx_ac97_probe(struct platform_device *pdev,
 		goto sport_err;
 	}
 	/*SPORT works in TDM mode to simulate AC97 transfers*/
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+	ret = sport_set_multichannel(sport_handle, 16, 0x3FF, 1);
+#else
 	ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
+#endif
 	if (ret) {
 		pr_err("SPORT is busy!\n");
 		ret = -EBUSY;

sound/soc/blackfin/bf5xx-ac97.h

@@ -1,5 +1,5 @@
 /*
- * linux/sound/arm/bf5xx-ac97.h
+ * sound/soc/blackfin/bf5xx-ac97.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

sound/soc/blackfin/bf5xx-i2s.c

@@ -77,12 +77,12 @@ static struct sport_param sport_params[2] = {
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
@@ -227,7 +227,8 @@ static int bf5xx_i2s_probe(struct platform_device *pdev,
 	return 0;
 }
 
-static void bf5xx_i2s_remove(struct snd_soc_dai *dai)
+static void bf5xx_i2s_remove(struct platform_device *pdev,
+			struct snd_soc_dai *dai)
 {
 	pr_debug("%s enter\n", __func__);
 	peripheral_free_list(&sport_req[sport_num][0]);
@@ -236,36 +237,31 @@ static void bf5xx_i2s_remove(struct snd_soc_dai *dai)
 #ifdef CONFIG_PM
 static int bf5xx_i2s_suspend(struct snd_soc_dai *dai)
 {
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
 
 	pr_debug("%s : sport %d\n", __func__, dai->id);
-	if (!dai->active)
-		return 0;
+
 	if (dai->capture.active)
-		sport_rx_stop(sport);
+		sport_rx_stop(sport_handle);
 	if (dai->playback.active)
-		sport_tx_stop(sport);
+		sport_tx_stop(sport_handle);
 	return 0;
 }
 
 static int bf5xx_i2s_resume(struct snd_soc_dai *dai)
 {
 	int ret;
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
 
 	pr_debug("%s : sport %d\n", __func__, dai->id);
-	if (!dai->active)
-		return 0;
 
-	ret = sport_config_rx(sport, RFSR | RCKFE, RSFSE|0x1f, 0, 0);
+	ret = sport_config_rx(sport_handle, bf5xx_i2s.rcr1,
+				      bf5xx_i2s.rcr2, 0, 0);
 	if (ret) {
 		pr_err("SPORT is busy!\n");
 		return -EBUSY;
 	}
 
-	ret = sport_config_tx(sport, TFSR | TCKFE, TSFSE|0x1f, 0, 0);
+	ret = sport_config_tx(sport_handle, bf5xx_i2s.tcr1,
+				      bf5xx_i2s.tcr2, 0, 0);
 	if (ret) {
 		pr_err("SPORT is busy!\n");
 		return -EBUSY;

sound/soc/blackfin/bf5xx-i2s.h

@@ -1,5 +1,5 @@
 /*
- * linux/sound/arm/bf5xx-i2s.h
+ * sound/soc/blackfin/bf5xx-i2s.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

sound/soc/blackfin/bf5xx-sport.c

@@ -326,7 +326,7 @@ static inline int sport_hook_tx_dummy(struct sport_device *sport)
 
 int sport_tx_start(struct sport_device *sport)
 {
-	unsigned flags;
+	unsigned long flags;
 	pr_debug("%s: tx_run:%d, rx_run:%d\n", __func__,
 			sport->tx_run, sport->rx_run);
 	if (sport->tx_run)

sound/soc/blackfin/bf5xx-tdm.c

@@ -78,12 +78,12 @@ static struct sport_param sport_params[2] = {
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,

sound/soc/codecs/ad1836.c

@@ -251,8 +251,7 @@ static int __devexit ad1836_spi_remove(struct spi_device *spi)
 
 static struct spi_driver ad1836_spi_driver = {
 	.driver = {
-		.name	= "ad1836-spi",
-		.bus	= &spi_bus_type,
+		.name	= "ad1836",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= ad1836_spi_probe,

sound/soc/codecs/ad1938.c

@@ -456,7 +456,6 @@ static int __devexit ad1938_spi_remove(struct spi_device *spi)
 static struct spi_driver ad1938_spi_driver = {
 	.driver = {
 		.name	= "ad1938",
-		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= ad1938_spi_probe,
@@ -515,6 +514,7 @@ static int ad1938_register(struct ad1938_priv *ad1938)
 	codec->num_dai = 1;
 	codec->write = ad1938_write_reg;
 	codec->read = ad1938_read_reg_cache;
+	codec->set_bias_level = ad1938_set_bias_level;
 	INIT_LIST_HEAD(&codec->dapm_widgets);
 	INIT_LIST_HEAD(&codec->dapm_paths);
 

sound/soc/codecs/wm8753.c

@@ -595,6 +595,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	/* Mono Capture mixer-mux */
 	{"Capture Right Mixer", "Stereo", "Capture Right Mux"},
+	{"Capture Left Mixer", "Stereo", "Capture Left Mux"},
 	{"Capture Left Mixer", "Analogue Mix Left", "Capture Left Mux"},
 	{"Capture Left Mixer", "Analogue Mix Left", "Capture Right Mux"},
 	{"Capture Right Mixer", "Analogue Mix Right", "Capture Left Mux"},

sound/soc/davinci/davinci-i2s.c

@@ -97,22 +97,19 @@ enum {
 	DAVINCI_MCBSP_WORD_32,
 };
 
-static struct davinci_pcm_dma_params davinci_i2s_pcm_out = {
-	.name = "I2S PCM Stereo out",
-};
-
-static struct davinci_pcm_dma_params davinci_i2s_pcm_in = {
-	.name = "I2S PCM Stereo in",
-};
-
 struct davinci_mcbsp_dev {
+	/*
+	 * dma_params must be first because rtd->dai->cpu_dai->private_data
+	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+	 * davinci_pcm_open.
+	 */
+	struct davinci_pcm_dma_params	dma_params[2];
 	void __iomem			*base;
 #define MOD_DSP_A	0
 #define MOD_DSP_B	1
 	int				mode;
 	u32				pcr;
 	struct clk			*clk;
-	struct davinci_pcm_dma_params	*dma_params[2];
 };
 
 static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -215,14 +212,6 @@ static void davinci_mcbsp_stop(struct davinci_mcbsp_dev *dev, int playback)
 	toggle_clock(dev, playback);
 }
 
-static int davinci_i2s_startup(struct snd_pcm_substream *substream,
-			       struct snd_soc_dai *cpu_dai)
-{
-	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
-	cpu_dai->dma_data = dev->dma_params[substream->stream];
-	return 0;
-}
-
 #define DEFAULT_BITPERSAMPLE	16
 
 static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
@@ -353,8 +342,9 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
-	struct davinci_pcm_dma_params *dma_params = dai->dma_data;
 	struct davinci_mcbsp_dev *dev = dai->private_data;
+	struct davinci_pcm_dma_params *dma_params =
+					&dev->dma_params[substream->stream];
 	struct snd_interval *i = NULL;
 	int mcbsp_word_length;
 	unsigned int rcr, xcr, srgr;
@@ -472,7 +462,6 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
-	.startup 	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -534,12 +523,10 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 
 	dev->base = (void __iomem *)IO_ADDRESS(mem->start);
 
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
 
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
 
 	/* first TX, then RX */
@@ -549,15 +536,15 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].channel = res->start;
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
 		dev_err(&pdev->dev, "no DMA resource\n");
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
 
 	davinci_i2s_dai.private_data = dev;
 	ret = snd_soc_register_dai(&davinci_i2s_dai);