mmc: at91_mci: fix multiblock SDIO transfers

The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte
transfers, but at91_mci driver doesn't use them and handles all SDIO
transfers as ordinary MMC block transfers. This causes problems for
multiple-block SDIO transfers (in particular for 256-bytes blocks).

Fix this situation by checking the opcode for SDIO CMD53 and setting
the transfer type in the AT91_MCI_CMDR register properly.

This patch was tested with libertas SDIO driver: problem with TX
timeouts on big packets was eliminated.

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Cc: <stable@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

arch/arm/mach-at91/include/mach/at91_mci.h

@@ -74,6 +74,8 @@
 #define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */

drivers/mmc/host/at91_mci.c

@@ -69,6 +69,7 @@
 #include <linux/highmem.h>
 
 #include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 		else if (data->flags & MMC_DATA_WRITE)
 			cmdr |= AT91_MCI_TRCMD_START;
 
-		if (data->flags & MMC_DATA_STREAM)
-			cmdr |= AT91_MCI_TRTYP_STREAM;
-		if (data->blocks > 1)
-			cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
+		} else {
+			if (data->flags & MMC_DATA_STREAM)
+				cmdr |= AT91_MCI_TRTYP_STREAM;
+			if (data->blocks > 1)
+				cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+		}
 	}
 	else {
 		block_length = 0;