staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS

Instead now use ioremap. This is needed for 3.4 since this change
emerged in mainline during one of the previous rc cycles.

These solves the following compilation breaks:

drivers/staging/tidspbridge/core/tiomap3430.c:
    In function ‘bridge_brd_start’:
drivers/staging/tidspbridge/core/tiomap3430.c:425:4:
    error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’

drivers/staging/tidspbridge/core/wdt.c: In function ‘dsp_wdt_init’:
drivers/staging/tidspbridge/core/wdt.c:56:2:
    error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’

For control registers a new function needs to be defined so we
can get rid of a layer violation, but that approach must be queued
for the next merge window.

As seen in:
http://www.arm.linux.org.uk/developer/build/
platform: omap4430-sdp		build: uImage
config: randconfig			version: 3.4.0-rc3
start time: Apr 20 2012 01:07

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/tidspbridge/core/tiomap3430.c

@@ -79,10 +79,6 @@
 #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
 
-#define OMAP343X_CTRL_REGADDR(reg) \
-	OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-
-
 /* Forward Declarations: */
 static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
 static int bridge_brd_read(struct bridge_dev_context *dev_ctxt,
@@ -418,19 +414,27 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 
 		/* Assert RST1 i.e only the RST only for DSP megacell */
 		if (!status) {
+			/*
+			 * XXX: ioremapping  MUST be removed once ctrl
+			 * function is made available.
+			 */
+			void __iomem *ctrl = ioremap(OMAP343X_CTRL_BASE, SZ_4K);
+			if (!ctrl)
+				return -ENOMEM;
+
 			(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
 					OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD,
 					OMAP2_RM_RSTCTRL);
 			/* Mask address with 1K for compatibility */
 			__raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK,
-					OMAP343X_CTRL_REGADDR(
-					OMAP343X_CONTROL_IVA2_BOOTADDR));
+					ctrl + OMAP343X_CONTROL_IVA2_BOOTADDR);
 			/*
 			 * Set bootmode to self loop if dsp_debug flag is true
 			 */
 			__raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0,
-					OMAP343X_CTRL_REGADDR(
-					OMAP343X_CONTROL_IVA2_BOOTMOD));
+					ctrl + OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+			iounmap(ctrl);
 		}
 	}
 	if (!status) {

drivers/staging/tidspbridge/core/wdt.c

@@ -53,7 +53,10 @@ int dsp_wdt_init(void)
 	int ret = 0;
 
 	dsp_wdt.sm_wdt = NULL;
-	dsp_wdt.reg_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_WDT3_BASE);
+	dsp_wdt.reg_base = ioremap(OMAP34XX_WDT3_BASE, SZ_4K);
+	if (!dsp_wdt.reg_base)
+		return -ENOMEM;
+
 	tasklet_init(&dsp_wdt.wdt3_tasklet, dsp_wdt_dpc, 0);
 
 	dsp_wdt.fclk = clk_get(NULL, "wdt3_fck");
@@ -99,6 +102,9 @@ void dsp_wdt_exit(void)
 	dsp_wdt.fclk = NULL;
 	dsp_wdt.iclk = NULL;
 	dsp_wdt.sm_wdt = NULL;
+
+	if (dsp_wdt.reg_base)
+		iounmap(dsp_wdt.reg_base);
 	dsp_wdt.reg_base = NULL;
 }