Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into…

… drm-fixes

* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
  drm/i915: Only bind to function 0 of the PCI device
  drm/i915: Suppress spurious vblank interrupts
  drm: Avoid leak of adjusted mode along quick set_mode paths
  drm: Simplify and defend later checks when disabling a crtc
  drm: Don't switch fb when disabling an output
  drm/i915: Reset crtc after resume
  drm/i915/crt: Force the initial probe after reset
  drm/i915: Reset state after a GPU reset or resume
  drm: Add an interface to reset the device
  drm/i915/sdvo: If at first we don't succeed in reading the response, wait

drivers/gpu/drm/drm_crtc.c

@@ -2674,3 +2674,23 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
 	mutex_unlock(&dev->mode_config.mutex);
 	return ret;
 }
+
+void drm_mode_config_reset(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		if (crtc->funcs->reset)
+			crtc->funcs->reset(crtc);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		if (encoder->funcs->reset)
+			encoder->funcs->reset(encoder);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->funcs->reset)
+			connector->funcs->reset(connector);
+}
+EXPORT_SYMBOL(drm_mode_config_reset);

drivers/gpu/drm/drm_crtc_helper.c

@@ -343,13 +343,12 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	struct drm_encoder *encoder;
 	bool ret = true;
 
-	adjusted_mode = drm_mode_duplicate(dev, mode);
-
 	crtc->enabled = drm_helper_crtc_in_use(crtc);
-
 	if (!crtc->enabled)
 		return true;
 
+	adjusted_mode = drm_mode_duplicate(dev, mode);
+
 	saved_hwmode = crtc->hwmode;
 	saved_mode = crtc->mode;
 	saved_x = crtc->x;
@@ -437,10 +436,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	 */
 	drm_calc_timestamping_constants(crtc);
 
-	/* XXX free adjustedmode */
-	drm_mode_destroy(dev, adjusted_mode);
 	/* FIXME: add subpixel order */
 done:
+	drm_mode_destroy(dev, adjusted_mode);
 	if (!ret) {
 		crtc->hwmode = saved_hwmode;
 		crtc->mode = saved_mode;
@@ -497,14 +495,17 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 
 	crtc_funcs = set->crtc->helper_private;
 
+	if (!set->mode)
+		set->fb = NULL;
+
 	if (set->fb) {
 		DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
 				set->crtc->base.id, set->fb->base.id,
 				(int)set->num_connectors, set->x, set->y);
 	} else {
-		DRM_DEBUG_KMS("[CRTC:%d] [NOFB] #connectors=%d (x y) (%i %i)\n",
-				set->crtc->base.id, (int)set->num_connectors,
-				set->x, set->y);
+		DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
+		set->mode = NULL;
+		set->num_connectors = 0;
 	}
 
 	dev = set->crtc->dev;
@@ -649,8 +650,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		mode_changed = true;
 
 	if (mode_changed) {
-		set->crtc->enabled = (set->mode != NULL);
-		if (set->mode != NULL) {
+		set->crtc->enabled = drm_helper_crtc_in_use(set->crtc);
+		if (set->crtc->enabled) {
 			DRM_DEBUG_KMS("attempting to set mode from"
 					" userspace\n");
 			drm_mode_debug_printmodeline(set->mode);

drivers/gpu/drm/drm_irq.c

@@ -1250,15 +1250,15 @@ void drm_handle_vblank_events(struct drm_device *dev, int crtc)
  * Drivers should call this routine in their vblank interrupt handlers to
  * update the vblank counter and send any signals that may be pending.
  */
-void drm_handle_vblank(struct drm_device *dev, int crtc)
+bool drm_handle_vblank(struct drm_device *dev, int crtc)
 {
 	u32 vblcount;
 	s64 diff_ns;
 	struct timeval tvblank;
 	unsigned long irqflags;
 
 	if (!dev->num_crtcs)
-		return;
+		return false;
 
 	/* Need timestamp lock to prevent concurrent execution with
 	 * vblank enable/disable, as this would cause inconsistent
@@ -1269,7 +1269,7 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
 	/* Vblank irq handling disabled. Nothing to do. */
 	if (!dev->vblank_enabled[crtc]) {
 		spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
-		return;
+		return false;
 	}
 
 	/* Fetch corresponding timestamp for this vblank interval from
@@ -1311,5 +1311,6 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
 	drm_handle_vblank_events(dev, crtc);
 
 	spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
+	return true;
 }
 EXPORT_SYMBOL(drm_handle_vblank);

drivers/gpu/drm/i915/i915_drv.c

@@ -354,6 +354,7 @@ static int i915_drm_thaw(struct drm_device *dev)
 		error = i915_gem_init_ringbuffer(dev);
 		mutex_unlock(&dev->struct_mutex);
 
+		drm_mode_config_reset(dev);
 		drm_irq_install(dev);
 
 		/* Resume the modeset for every activated CRTC */
@@ -542,6 +543,7 @@ int i915_reset(struct drm_device *dev, u8 flags)
 
 		mutex_unlock(&dev->struct_mutex);
 		drm_irq_uninstall(dev);
+		drm_mode_config_reset(dev);
 		drm_irq_install(dev);
 		mutex_lock(&dev->struct_mutex);
 	}
@@ -566,6 +568,14 @@ int i915_reset(struct drm_device *dev, u8 flags)
 static int __devinit
 i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	/* Only bind to function 0 of the device. Early generations
+	 * used function 1 as a placeholder for multi-head. This causes
+	 * us confusion instead, especially on the systems where both
+	 * functions have the same PCI-ID!
+	 */
+	if (PCI_FUNC(pdev->devfn))
+		return -ENODEV;
+
 	return drm_get_pci_dev(pdev, ent, &driver);
 }
 

drivers/gpu/drm/i915/i915_irq.c

@@ -1196,18 +1196,18 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 				intel_finish_page_flip_plane(dev, 1);
 		}
 
-		if (pipea_stats & vblank_status) {
+		if (pipea_stats & vblank_status &&
+		    drm_handle_vblank(dev, 0)) {
 			vblank++;
-			drm_handle_vblank(dev, 0);
 			if (!dev_priv->flip_pending_is_done) {
 				i915_pageflip_stall_check(dev, 0);
 				intel_finish_page_flip(dev, 0);
 			}
 		}
 
-		if (pipeb_stats & vblank_status) {
+		if (pipeb_stats & vblank_status &&
+		    drm_handle_vblank(dev, 1)) {
 			vblank++;
-			drm_handle_vblank(dev, 1);
 			if (!dev_priv->flip_pending_is_done) {
 				i915_pageflip_stall_check(dev, 1);
 				intel_finish_page_flip(dev, 1);

drivers/gpu/drm/i915/intel_crt.c

@@ -535,6 +535,15 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
+static void intel_crt_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+
+	if (HAS_PCH_SPLIT(dev))
+		crt->force_hotplug_required = 1;
+}
+
 /*
  * Routines for controlling stuff on the analog port
  */
@@ -548,6 +557,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.reset = intel_crt_reset,
 	.dpms = drm_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,

drivers/gpu/drm/i915/intel_display.c

@@ -5551,6 +5551,18 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	return ret;
 }
 
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	/* Reset flags back to the 'unknown' status so that they
+	 * will be correctly set on the initial modeset.
+	 */
+	intel_crtc->cursor_addr = 0;
+	intel_crtc->dpms_mode = -1;
+	intel_crtc->active = true; /* force the pipe off on setup_init_config */
+}
+
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.dpms = intel_crtc_dpms,
 	.mode_fixup = intel_crtc_mode_fixup,
@@ -5562,6 +5574,7 @@ static struct drm_crtc_helper_funcs intel_helper_funcs = {
 };
 
 static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.reset = intel_crtc_reset,
 	.cursor_set = intel_crtc_cursor_set,
 	.cursor_move = intel_crtc_cursor_move,
 	.gamma_set = intel_crtc_gamma_set,
@@ -5652,9 +5665,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
-	intel_crtc->cursor_addr = 0;
-	intel_crtc->dpms_mode = -1;
-	intel_crtc->active = true; /* force the pipe off on setup_init_config */
+	intel_crtc_reset(&intel_crtc->base);
 
 	if (HAS_PCH_SPLIT(dev)) {
 		intel_helper_funcs.prepare = ironlake_crtc_prepare;

drivers/gpu/drm/i915/intel_sdvo.c

@@ -473,20 +473,6 @@ static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd,
 		return false;
 	}
 
-	i = 3;
-	while (status == SDVO_CMD_STATUS_PENDING && i--) {
-		if (!intel_sdvo_read_byte(intel_sdvo,
-					  SDVO_I2C_CMD_STATUS,
-					  &status))
-			return false;
-	}
-	if (status != SDVO_CMD_STATUS_SUCCESS) {
-		DRM_DEBUG_KMS("command returns response %s [%d]\n",
-			      status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP ? cmd_status_names[status] : "???",
-			      status);
-		return false;
-	}
-
 	return true;
 }
 
@@ -497,6 +483,8 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
 	u8 status;
 	int i;
 
+	DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
+
 	/*
 	 * The documentation states that all commands will be
 	 * processed within 15µs, and that we need only poll
@@ -505,14 +493,19 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
 	 *
 	 * Check 5 times in case the hardware failed to read the docs.
 	 */
-	do {
+	if (!intel_sdvo_read_byte(intel_sdvo,
+				  SDVO_I2C_CMD_STATUS,
+				  &status))
+		goto log_fail;
+
+	while (status == SDVO_CMD_STATUS_PENDING && retry--) {
+		udelay(15);
 		if (!intel_sdvo_read_byte(intel_sdvo,
 					  SDVO_I2C_CMD_STATUS,
 					  &status))
-			return false;
-	} while (status == SDVO_CMD_STATUS_PENDING && --retry);
+			goto log_fail;
+	}
 
-	DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
 	if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
 		DRM_LOG_KMS("(%s)", cmd_status_names[status]);
 	else
@@ -533,7 +526,7 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
 	return true;
 
 log_fail:
-	DRM_LOG_KMS("\n");
+	DRM_LOG_KMS("... failed\n");
 	return false;
 }
 
@@ -550,14 +543,18 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
 static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
 					      u8 ddc_bus)
 {
+	/* This must be the immediately preceding write before the i2c xfer */
 	return intel_sdvo_write_cmd(intel_sdvo,
 				    SDVO_CMD_SET_CONTROL_BUS_SWITCH,
 				    &ddc_bus, 1);
 }
 
 static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len)
 {
-	return intel_sdvo_write_cmd(intel_sdvo, cmd, data, len);
+	if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len))
+		return false;
+
+	return intel_sdvo_read_response(intel_sdvo, NULL, 0);
 }
 
 static bool
@@ -859,18 +856,21 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
 
 	intel_dip_infoframe_csum(&avi_if);
 
-	if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_INDEX,
+	if (!intel_sdvo_set_value(intel_sdvo,
+				  SDVO_CMD_SET_HBUF_INDEX,
 				  set_buf_index, 2))
 		return false;
 
 	for (i = 0; i < sizeof(avi_if); i += 8) {
-		if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_DATA,
+		if (!intel_sdvo_set_value(intel_sdvo,
+					  SDVO_CMD_SET_HBUF_DATA,
 					  data, 8))
 			return false;
 		data++;
 	}
 
-	return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_TXRATE,
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_HBUF_TXRATE,
 				    &tx_rate, 1);
 }
 

include/drm/drmP.h

@@ -1367,7 +1367,7 @@ extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
 extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
 extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
 				     struct timeval *vblanktime);
-extern void drm_handle_vblank(struct drm_device *dev, int crtc);
+extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
 extern int drm_vblank_get(struct drm_device *dev, int crtc);
 extern void drm_vblank_put(struct drm_device *dev, int crtc);
 extern void drm_vblank_off(struct drm_device *dev, int crtc);

include/drm/drm_crtc.h

@@ -275,6 +275,7 @@ struct drm_pending_vblank_event;
 
 /**
  * drm_crtc_funcs - control CRTCs for a given device
+ * @reset: reset CRTC after state has been invalidate (e.g. resume)
  * @dpms: control display power levels
  * @save: save CRTC state
  * @resore: restore CRTC state
@@ -302,6 +303,8 @@ struct drm_crtc_funcs {
 	void (*save)(struct drm_crtc *crtc); /* suspend? */
 	/* Restore CRTC state */
 	void (*restore)(struct drm_crtc *crtc); /* resume? */
+	/* Reset CRTC state */
+	void (*reset)(struct drm_crtc *crtc);
 
 	/* cursor controls */
 	int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
@@ -379,6 +382,7 @@ struct drm_crtc {
  * @dpms: set power state (see drm_crtc_funcs above)
  * @save: save connector state
  * @restore: restore connector state
+ * @reset: reset connector after state has been invalidate (e.g. resume)
  * @mode_valid: is this mode valid on the given connector?
  * @mode_fixup: try to fixup proposed mode for this connector
  * @mode_set: set this mode
@@ -396,6 +400,7 @@ struct drm_connector_funcs {
 	void (*dpms)(struct drm_connector *connector, int mode);
 	void (*save)(struct drm_connector *connector);
 	void (*restore)(struct drm_connector *connector);
+	void (*reset)(struct drm_connector *connector);
 
 	/* Check to see if anything is attached to the connector.
 	 * @force is set to false whilst polling, true when checking the
@@ -413,6 +418,7 @@ struct drm_connector_funcs {
 };
 
 struct drm_encoder_funcs {
+	void (*reset)(struct drm_encoder *encoder);
 	void (*destroy)(struct drm_encoder *encoder);
 };
 
@@ -656,6 +662,7 @@ extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
 						   struct drm_display_mode *mode);
 extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode);
 extern void drm_mode_config_init(struct drm_device *dev);
+extern void drm_mode_config_reset(struct drm_device *dev);
 extern void drm_mode_config_cleanup(struct drm_device *dev);
 extern void drm_mode_set_name(struct drm_display_mode *mode);
 extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2);