Merge tag 'usb-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small remaining USB and Thunderbolt fixes and device ids
  for 6.12-rc7. Included in here are:

   - new USB serial driver device ids

   - thunderbolt driver fixes for reported problems

   - typec bugfixes

   - dwc3 driver fix

   - musb driver fix

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: qcserial: add support for Sierra Wireless EM86xx
  thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
  usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()
  usb: dwc3: fix fault at system suspend if device was already runtime suspended
  usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  usb: musb: sunxi: Fix accessing an released usb phy
  USB: serial: io_edgeport: fix use after free in debug printk
  USB: serial: option: add Quectel RG650V
  USB: serial: option: add Fibocom FG132 0x0112 composition
  thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING

drivers/thunderbolt/retimer.c

@@ -532,6 +532,8 @@ int tb_retimer_scan(struct tb_port *port, bool add)
 	}
 
 	ret = 0;
+	if (!IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING))
+		max = min(last_idx, max);
 
 	/* Add retimers if they do not exist already */
 	for (i = 1; i <= max; i++) {

drivers/thunderbolt/usb4.c

@@ -48,7 +48,7 @@ enum usb4_ba_index {
 
 /* Delays in us used with usb4_port_wait_for_bit() */
 #define USB4_PORT_DELAY			50
-#define USB4_PORT_SB_DELAY		5000
+#define USB4_PORT_SB_DELAY		1000
 
 static int usb4_native_switch_op(struct tb_switch *sw, u16 opcode,
 				 u32 *metadata, u8 *status,

drivers/usb/dwc3/core.c

@@ -2342,10 +2342,18 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 	u32 reg;
 	int i;
 
-	dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
-			    DWC3_GUSB2PHYCFG_SUSPHY) ||
-			    (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) &
-			    DWC3_GUSB3PIPECTL_SUSPHY);
+	if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
+		dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
+				    DWC3_GUSB2PHYCFG_SUSPHY) ||
+				    (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) &
+				    DWC3_GUSB3PIPECTL_SUSPHY);
+		/*
+		 * TI AM62 platform requires SUSPHY to be
+		 * enabled for system suspend to work.
+		 */
+		if (!dwc->susphy_state)
+			dwc3_enable_susphy(dwc, true);
+	}
 
 	switch (dwc->current_dr_role) {
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2398,15 +2406,6 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		break;
 	}
 
-	if (!PMSG_IS_AUTO(msg)) {
-		/*
-		 * TI AM62 platform requires SUSPHY to be
-		 * enabled for system suspend to work.
-		 */
-		if (!dwc->susphy_state)
-			dwc3_enable_susphy(dwc, true);
-	}
-
 	return 0;
 }
 

drivers/usb/musb/sunxi.c

@@ -293,8 +293,6 @@ static int sunxi_musb_exit(struct musb *musb)
 	if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags))
 		sunxi_sram_release(musb->controller->parent);
 
-	devm_usb_put_phy(glue->dev, glue->xceiv);
-
 	return 0;
 }
 

drivers/usb/serial/io_edgeport.c

@@ -770,11 +770,12 @@ static void edge_bulk_out_data_callback(struct urb *urb)
 static void edge_bulk_out_cmd_callback(struct urb *urb)
 {
 	struct edgeport_port *edge_port = urb->context;
+	struct device *dev = &urb->dev->dev;
 	int status = urb->status;
 
 	atomic_dec(&CmdUrbs);
-	dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n",
-		__func__, urb, atomic_read(&CmdUrbs));
+	dev_dbg(dev, "%s - FREE URB %p (outstanding %d)\n", __func__, urb,
+		atomic_read(&CmdUrbs));
 
 
 	/* clean up the transfer buffer */
@@ -784,8 +785,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 	usb_free_urb(urb);
 
 	if (status) {
-		dev_dbg(&urb->dev->dev,
-			"%s - nonzero write bulk status received: %d\n",
+		dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
 			__func__, status);
 		return;
 	}

drivers/usb/serial/option.c

@@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_VENDOR_ID			0x2c7c
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_RG650V			0x0122
 #define QUECTEL_PRODUCT_EM061K_LTA		0x0123
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
@@ -1273,6 +1274,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0, 0) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
@@ -2320,6 +2323,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x30) },	/* Fibocom FG132 Diag */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x40) },	/* Fibocom FG132 AT */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0, 0) },		/* Fibocom FG132 NMEA */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff),			/* Fibocom FM135 (laptop MBIM) */
 	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */

drivers/usb/serial/qcserial.c

@@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x9090)},	/* Sierra Wireless EM7565 QDL */
 	{DEVICE_SWI(0x1199, 0x9091)},	/* Sierra Wireless EM7565 */
 	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
+	{DEVICE_SWI(0x1199, 0x90e4)},	/* Sierra Wireless EM86xx QDL*/
+	{DEVICE_SWI(0x1199, 0x90e5)},	/* Sierra Wireless EM86xx */
 	{DEVICE_SWI(0x1199, 0xc080)},	/* Sierra Wireless EM7590 QDL */
 	{DEVICE_SWI(0x1199, 0xc081)},	/* Sierra Wireless EM7590 */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */

drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c

@@ -227,6 +227,10 @@ qcom_pmic_typec_pdphy_pd_transmit_payload(struct pmic_typec_pdphy *pmic_typec_pd
 
 	spin_lock_irqsave(&pmic_typec_pdphy->lock, flags);
 
+	hdr_len = sizeof(msg->header);
+	txbuf_len = pd_header_cnt_le(msg->header) * 4;
+	txsize_len = hdr_len + txbuf_len - 1;
+
 	ret = regmap_read(pmic_typec_pdphy->regmap,
 			  pmic_typec_pdphy->base + USB_PDPHY_RX_ACKNOWLEDGE_REG,
 			  &val);
@@ -244,10 +248,6 @@ qcom_pmic_typec_pdphy_pd_transmit_payload(struct pmic_typec_pdphy *pmic_typec_pd
 	if (ret)
 		goto done;
 
-	hdr_len = sizeof(msg->header);
-	txbuf_len = pd_header_cnt_le(msg->header) * 4;
-	txsize_len = hdr_len + txbuf_len - 1;
-
 	/* Write message header sizeof(u16) to USB_PDPHY_TX_BUFFER_HDR_REG */
 	ret = regmap_bulk_write(pmic_typec_pdphy->regmap,
 				pmic_typec_pdphy->base + USB_PDPHY_TX_BUFFER_HDR_REG,

drivers/usb/typec/ucsi/ucsi_ccg.c

@@ -482,6 +482,8 @@ static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc,
 
 	port = uc->orig;
 	new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd);
+	if (new_cam >= ARRAY_SIZE(uc->updated))
+		return;
 	new_port = &uc->updated[new_cam];
 	cam = new_port->linked_idx;
 	enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd);