Merge tag 'iio-fixes-for-4.11d' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/jic23/iio into staging-linus

4th set of IIO fixes for the 4.12 cycle.

core
 - fix IIO_VAL_FRACTIONAL_LOG2 handling for negative values.
bmg160
 - reset chip on probe to avoid a failure on some systems
cros_ec
 - return type correctly when reading raw and calibbias data.
hid-sensor-accel
 - fix a duplicate scan index error due to wrong number of channels
 for gravity sensor.
hid-sensors
 - ensure a get_feature is always done before the first set feature to
 avoid issues with wrong cached values.
st-pressure
 - initalize lps22hb boot time to avoid giving stale data.

drivers/iio/accel/hid-sensor-accel-3d.c

@@ -370,10 +370,12 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 		name = "accel_3d";
 		channel_spec = accel_3d_channels;
 		channel_size = sizeof(accel_3d_channels);
+		indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
 	} else {
 		name = "gravity";
 		channel_spec = gravity_channels;
 		channel_size = sizeof(gravity_channels);
+		indio_dev->num_channels = ARRAY_SIZE(gravity_channels);
 	}
 	ret = hid_sensor_parse_common_attributes(hsdev, hsdev->usage,
 					&accel_state->common_attributes);
@@ -395,7 +397,6 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 		goto error_free_dev_mem;
 	}
 
-	indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
 	indio_dev->dev.parent = &pdev->dev;
 	indio_dev->info = &accel_3d_info;
 	indio_dev->name = name;

drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c

@@ -61,7 +61,7 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 		ret = st->core.read_ec_sensors_data(indio_dev, 1 << idx, &data);
 		if (ret < 0)
 			break;
-
+		ret = IIO_VAL_INT;
 		*val = data;
 		break;
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -76,7 +76,7 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
 			st->core.calib[i] =
 				st->core.resp->sensor_offset.offset[i];
-
+		ret = IIO_VAL_INT;
 		*val = st->core.calib[idx];
 		break;
 	case IIO_CHAN_INFO_SCALE:

drivers/iio/common/hid-sensors/hid-sensor-attributes.c

@@ -379,6 +379,8 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
 {
 
 	struct hid_sensor_hub_attribute_info timestamp;
+	s32 value;
+	int ret;
 
 	hid_sensor_get_reporting_interval(hsdev, usage_id, st);
 
@@ -417,6 +419,14 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
 		st->sensitivity.index, st->sensitivity.report_id,
 		timestamp.index, timestamp.report_id);
 
+	ret = sensor_hub_get_feature(hsdev,
+				st->power_state.report_id,
+				st->power_state.index, sizeof(value), &value);
+	if (ret < 0)
+		return ret;
+	if (value < 0)
+		return -EINVAL;
+
 	return 0;
 }
 EXPORT_SYMBOL(hid_sensor_parse_common_attributes);

drivers/iio/gyro/bmg160_core.c

@@ -27,6 +27,7 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
+#include <linux/delay.h>
 #include "bmg160.h"
 
 #define BMG160_IRQ_NAME		"bmg160_event"
@@ -52,6 +53,9 @@
 #define BMG160_DEF_BW			100
 #define BMG160_REG_PMU_BW_RES		BIT(7)
 
+#define BMG160_GYRO_REG_RESET		0x14
+#define BMG160_GYRO_RESET_VAL		0xb6
+
 #define BMG160_REG_INT_MAP_0		0x17
 #define BMG160_INT_MAP_0_BIT_ANY	BIT(1)
 
@@ -236,6 +240,14 @@ static int bmg160_chip_init(struct bmg160_data *data)
 	int ret;
 	unsigned int val;
 
+	/*
+	 * Reset chip to get it in a known good state. A delay of 30ms after
+	 * reset is required according to the datasheet.
+	 */
+	regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
+		     BMG160_GYRO_RESET_VAL);
+	usleep_range(30000, 30700);
+
 	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
 	if (ret < 0) {
 		dev_err(dev, "Error reading reg_chip_id\n");

drivers/iio/industrialio-core.c

@@ -610,10 +610,9 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
 		tmp0 = (int)div_s64_rem(tmp, 1000000000, &tmp1);
 		return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
 	case IIO_VAL_FRACTIONAL_LOG2:
-		tmp = (s64)vals[0] * 1000000000LL >> vals[1];
-		tmp1 = do_div(tmp, 1000000000LL);
-		tmp0 = tmp;
-		return snprintf(buf, len, "%d.%09u", tmp0, tmp1);
+		tmp = shift_right((s64)vals[0] * 1000000000LL, vals[1]);
+		tmp0 = (int)div_s64_rem(tmp, 1000000000LL, &tmp1);
+		return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
 	case IIO_VAL_INT_MULTIPLE:
 	{
 		int i;

drivers/iio/pressure/st_pressure_core.c

@@ -457,6 +457,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = true,
+		.bootime = 2,
 	},
 };