Merge branch 'qlcnic'

Himanshu Madhani says:

====================
qlcnic: Bug fixes.

This series contains bug fixes for mailbox handling and multi Tx queue support
for all supported adapters.

changes from v1 -> v2
o updated patch to fix usage of netif_tx_{wake,stop} api during link change
  as per David Miller's suggestion.
o Dropped patch to use spinklock per tx queue for more work.
o Added reworked patch for memory allocation failures.
o Added patch to allow capturing of dump, when auto recovery is disabled in firmware.
o Added patches for mailbox interrupt handling and debugging data for mailbox failure.

Please apply to net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -447,8 +447,9 @@ irqreturn_t qlcnic_83xx_intr(int irq, void *data)
 
 	qlcnic_83xx_poll_process_aen(adapter);
 
-	if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) {
-		ahw->diag_cnt++;
+	if (ahw->diag_test) {
+		if (ahw->diag_test == QLCNIC_INTERRUPT_TEST)
+			ahw->diag_cnt++;
 		qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter);
 		return IRQ_HANDLED;
 	}
@@ -1345,11 +1346,6 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test,
 	}
 
 	if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) {
-		/* disable and free mailbox interrupt */
-		if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) {
-			qlcnic_83xx_enable_mbx_poll(adapter);
-			qlcnic_83xx_free_mbx_intr(adapter);
-		}
 		adapter->ahw->loopback_state = 0;
 		adapter->ahw->hw_ops->setup_link_event(adapter, 1);
 	}
@@ -1363,33 +1359,20 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev,
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	struct qlcnic_host_sds_ring *sds_ring;
-	int ring, err;
+	int ring;
 
 	clear_bit(__QLCNIC_DEV_UP, &adapter->state);
 	if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) {
 		for (ring = 0; ring < adapter->drv_sds_rings; ring++) {
 			sds_ring = &adapter->recv_ctx->sds_rings[ring];
-			qlcnic_83xx_disable_intr(adapter, sds_ring);
-			if (!(adapter->flags & QLCNIC_MSIX_ENABLED))
-				qlcnic_83xx_enable_mbx_poll(adapter);
+			if (adapter->flags & QLCNIC_MSIX_ENABLED)
+				qlcnic_83xx_disable_intr(adapter, sds_ring);
 		}
 	}
 
 	qlcnic_fw_destroy_ctx(adapter);
 	qlcnic_detach(adapter);
 
-	if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) {
-		if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) {
-			err = qlcnic_83xx_setup_mbx_intr(adapter);
-			qlcnic_83xx_disable_mbx_poll(adapter);
-			if (err) {
-				dev_err(&adapter->pdev->dev,
-					"%s: failed to setup mbx interrupt\n",
-					__func__);
-				goto out;
-			}
-		}
-	}
 	adapter->ahw->diag_test = 0;
 	adapter->drv_sds_rings = drv_sds_rings;
 
@@ -1399,9 +1382,6 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev,
 	if (netif_running(netdev))
 		__qlcnic_up(adapter, netdev);
 
-	if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST &&
-	    !(adapter->flags & QLCNIC_MSIX_ENABLED))
-		qlcnic_83xx_disable_mbx_poll(adapter);
 out:
 	netif_device_attach(netdev);
 }
@@ -3754,6 +3734,19 @@ static void qlcnic_83xx_decode_mbx_rsp(struct qlcnic_adapter *adapter,
 	return;
 }
 
+static inline void qlcnic_dump_mailbox_registers(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+	u32 offset;
+
+	offset = QLCRDX(ahw, QLCNIC_DEF_INT_MASK);
+	dev_info(&adapter->pdev->dev, "Mbx interrupt mask=0x%x, Mbx interrupt enable=0x%x, Host mbx control=0x%x, Fw mbx control=0x%x",
+		 readl(ahw->pci_base0 + offset),
+		 QLCRDX(ahw, QLCNIC_MBX_INTR_ENBL),
+		 QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL),
+		 QLCRDX(ahw, QLCNIC_FW_MBX_CTRL));
+}
+
 static void qlcnic_83xx_mailbox_worker(struct work_struct *work)
 {
 	struct qlcnic_mailbox *mbx = container_of(work, struct qlcnic_mailbox,
@@ -3798,6 +3791,8 @@ static void qlcnic_83xx_mailbox_worker(struct work_struct *work)
 				__func__, cmd->cmd_op, cmd->type, ahw->pci_func,
 				ahw->op_mode);
 			clear_bit(QLC_83XX_MBX_READY, &mbx->status);
+			qlcnic_dump_mailbox_registers(adapter);
+			qlcnic_83xx_get_mbx_data(adapter, cmd);
 			qlcnic_dump_mbx(adapter, cmd);
 			qlcnic_83xx_idc_request_reset(adapter,
 						      QLCNIC_FORCE_FW_DUMP_KEY);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h

@@ -662,4 +662,5 @@ pci_ers_result_t qlcnic_83xx_io_error_detected(struct pci_dev *,
 					       pci_channel_state_t);
 pci_ers_result_t qlcnic_83xx_io_slot_reset(struct pci_dev *);
 void qlcnic_83xx_io_resume(struct pci_dev *);
+void qlcnic_83xx_stop_hw(struct qlcnic_adapter *);
 #endif

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

@@ -740,6 +740,7 @@ static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter)
 	adapter->ahw->idc.err_code = -EIO;
 	dev_err(&adapter->pdev->dev,
 		"%s: Device in unknown state\n", __func__);
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
 	return 0;
 }
 
@@ -818,7 +819,6 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter)
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	struct qlcnic_mailbox *mbx = ahw->mailbox;
 	int ret = 0;
-	u32 owner;
 	u32 val;
 
 	/* Perform NIC configuration based ready state entry actions */
@@ -848,9 +848,9 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter)
 			set_bit(__QLCNIC_RESETTING, &adapter->state);
 			qlcnic_83xx_idc_enter_need_reset_state(adapter, 1);
 		}  else {
-			owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
-			if (ahw->pci_func == owner)
-				qlcnic_dump_fw(adapter);
+			netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n",
+				    __func__);
+			qlcnic_83xx_idc_enter_failed_state(adapter, 1);
 		}
 		return -EIO;
 	}
@@ -948,13 +948,26 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter)
 	return 0;
 }
 
-static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter)
+static void qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter)
 {
-	dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__);
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+	u32 val, owner;
+
+	val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
+	if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) {
+		owner = qlcnic_83xx_idc_find_reset_owner_id(adapter);
+		if (ahw->pci_func == owner) {
+			qlcnic_83xx_stop_hw(adapter);
+			qlcnic_dump_fw(adapter);
+		}
+	}
+
+	netdev_warn(adapter->netdev, "%s: Reboot will be required to recover the adapter!!\n",
+		    __func__);
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
-	adapter->ahw->idc.err_code = -EIO;
+	ahw->idc.err_code = -EIO;
 
-	return 0;
+	return;
 }
 
 static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter)
@@ -1063,12 +1076,6 @@ void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work)
 	adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state;
 	qlcnic_83xx_periodic_tasks(adapter);
 
-	/* Do not reschedule if firmaware is in hanged state and auto
-	 * recovery is disabled
-	 */
-	if ((adapter->flags & QLCNIC_FW_HANG) && !qlcnic_auto_fw_reset)
-		return;
-
 	/* Re-schedule the function */
 	if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status))
 		qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state,
@@ -1219,10 +1226,10 @@ void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key)
 	}
 
 	val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
-	if ((val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) ||
-	    !qlcnic_auto_fw_reset) {
-		dev_err(&adapter->pdev->dev,
-			"%s:failed, device in non reset mode\n", __func__);
+	if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) {
+		netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n",
+			    __func__);
+		qlcnic_83xx_idc_enter_failed_state(adapter, 0);
 		qlcnic_83xx_unlock_driver(adapter);
 		return;
 	}
@@ -1254,24 +1261,24 @@ static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter)
 	if (size & 0xF)
 		size = (size + 16) & ~0xF;
 
-	p_cache = kzalloc(size, GFP_KERNEL);
+	p_cache = vzalloc(size);
 	if (p_cache == NULL)
 		return -ENOMEM;
 
 	ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache,
 						size / sizeof(u32));
 	if (ret) {
-		kfree(p_cache);
+		vfree(p_cache);
 		return ret;
 	}
 	/* 16 byte write to MS memory */
 	ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache,
 					  size / 16);
 	if (ret) {
-		kfree(p_cache);
+		vfree(p_cache);
 		return ret;
 	}
-	kfree(p_cache);
+	vfree(p_cache);
 
 	return ret;
 }
@@ -1939,7 +1946,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev,
 	p_dev->ahw->reset.seq_index = index;
 }
 
-static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev)
+void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev)
 {
 	p_dev->ahw->reset.seq_index = 0;
 
@@ -1994,6 +2001,14 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter)
 	val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL);
 	if (!(val & QLC_83XX_IDC_GRACEFULL_RESET))
 		qlcnic_dump_fw(adapter);
+
+	if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) {
+		netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n",
+			    __func__);
+		qlcnic_83xx_idc_enter_failed_state(adapter, 1);
+		return err;
+	}
+
 	qlcnic_83xx_init_hw(adapter);
 
 	if (qlcnic_83xx_copy_bootloader(adapter))
@@ -2073,8 +2088,8 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 		ahw->nic_mode = QLCNIC_DEFAULT_MODE;
 		adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
 		ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
-		adapter->max_sds_rings = ahw->max_rx_ques;
-		adapter->max_tx_rings = ahw->max_tx_ques;
+		adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
+		adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS;
 	} else {
 		return -EIO;
 	}

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

@@ -667,30 +667,25 @@ qlcnic_set_ringparam(struct net_device *dev,
 static int qlcnic_validate_ring_count(struct qlcnic_adapter *adapter,
 				      u8 rx_ring, u8 tx_ring)
 {
+	if (rx_ring == 0 || tx_ring == 0)
+		return -EINVAL;
+
 	if (rx_ring != 0) {
 		if (rx_ring > adapter->max_sds_rings) {
-			netdev_err(adapter->netdev, "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n",
+			netdev_err(adapter->netdev,
+				   "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n",
 				   rx_ring, adapter->max_sds_rings);
 			return -EINVAL;
 		}
 	}
 
 	 if (tx_ring != 0) {
-		if (qlcnic_82xx_check(adapter) &&
-		    (tx_ring > adapter->max_tx_rings)) {
+		if (tx_ring > adapter->max_tx_rings) {
 			netdev_err(adapter->netdev,
 				   "Invalid ring count, Tx ring count %d should not be greater than max %d driver Tx rings.\n",
 				   tx_ring, adapter->max_tx_rings);
 			return -EINVAL;
 		}
-
-		if (qlcnic_83xx_check(adapter) &&
-		    (tx_ring > QLCNIC_SINGLE_RING)) {
-			netdev_err(adapter->netdev,
-				   "Invalid ring count, Tx ring count %d should not be greater than %d driver Tx rings.\n",
-				   tx_ring, QLCNIC_SINGLE_RING);
-			 return -EINVAL;
-		}
 	}
 
 	return 0;
@@ -948,6 +943,7 @@ static int qlcnic_irq_test(struct net_device *netdev)
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	struct qlcnic_cmd_args cmd;
 	int ret, drv_sds_rings = adapter->drv_sds_rings;
+	int drv_tx_rings = adapter->drv_tx_rings;
 
 	if (qlcnic_83xx_check(adapter))
 		return qlcnic_83xx_interrupt_test(netdev);
@@ -980,6 +976,7 @@ static int qlcnic_irq_test(struct net_device *netdev)
 
 clear_diag_irq:
 	adapter->drv_sds_rings = drv_sds_rings;
+	adapter->drv_tx_rings = drv_tx_rings;
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
 
 	return ret;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c

@@ -687,17 +687,11 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup)
 	if (adapter->ahw->linkup && !linkup) {
 		netdev_info(netdev, "NIC Link is down\n");
 		adapter->ahw->linkup = 0;
-		if (netif_running(netdev)) {
-			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
-		}
+		netif_carrier_off(netdev);
 	} else if (!adapter->ahw->linkup && linkup) {
 		netdev_info(netdev, "NIC Link is up\n");
 		adapter->ahw->linkup = 1;
-		if (netif_running(netdev)) {
-			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
-		}
+		netif_carrier_on(netdev);
 	}
 }
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -1178,6 +1178,7 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter)
 	} else {
 		adapter->ahw->nic_mode = QLCNIC_DEFAULT_MODE;
 		adapter->max_tx_rings = QLCNIC_MAX_HW_TX_RINGS;
+		adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
 		adapter->flags &= ~QLCNIC_ESWITCH_ENABLED;
 	}
 
@@ -1940,7 +1941,6 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
 	qlcnic_detach(adapter);
 
 	adapter->drv_sds_rings = QLCNIC_SINGLE_RING;
-	adapter->drv_tx_rings = QLCNIC_SINGLE_RING;
 	adapter->ahw->diag_test = test;
 	adapter->ahw->linkup = 0;