Merge tag 'iio-fixes-for-3.12b2' of git://git.kernel.org/pub/scm/linu…

…x/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 3.12 cycle (take 2)

A few small fixes:
1) Make sure that debugfs entries are removed early enough to prevent
a race.
2) Drop a stray regulator_put from ad8366 left over from the devm_ patches.
3) The ST magnetometer driver had incorrect register addresses for the
   actual data channels.

drivers/iio/amplifiers/ad8366.c

@@ -185,10 +185,8 @@ static int ad8366_remove(struct spi_device *spi)
 
 	iio_device_unregister(indio_dev);
 
-	if (!IS_ERR(reg)) {
+	if (!IS_ERR(reg))
 		regulator_disable(reg);
-		regulator_put(reg);
-	}
 
 	return 0;
 }

drivers/iio/industrialio-core.c

@@ -852,7 +852,6 @@ static void iio_dev_release(struct device *device)
 		iio_device_unregister_trigger_consumer(indio_dev);
 	iio_device_unregister_eventset(indio_dev);
 	iio_device_unregister_sysfs(indio_dev);
-	iio_device_unregister_debugfs(indio_dev);
 
 	ida_simple_remove(&iio_ida, indio_dev->id);
 	kfree(indio_dev);
@@ -1087,6 +1086,7 @@ void iio_device_unregister(struct iio_dev *indio_dev)
 
 	if (indio_dev->chrdev.dev)
 		cdev_del(&indio_dev->chrdev);
+	iio_device_unregister_debugfs(indio_dev);
 
 	iio_disable_all_buffers(indio_dev);
 

drivers/iio/magnetometer/st_magn_core.c

@@ -29,9 +29,9 @@
 #define ST_MAGN_NUMBER_DATA_CHANNELS		3
 
 /* DEFAULT VALUE FOR SENSORS */
-#define ST_MAGN_DEFAULT_OUT_X_L_ADDR		0X04
-#define ST_MAGN_DEFAULT_OUT_Y_L_ADDR		0X08
-#define ST_MAGN_DEFAULT_OUT_Z_L_ADDR		0X06
+#define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0X03
+#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0X07
+#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0X05
 
 /* FULLSCALE */
 #define ST_MAGN_FS_AVL_1300MG			1300
@@ -117,16 +117,16 @@
 static const struct iio_chan_spec st_magn_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
-			ST_MAGN_DEFAULT_OUT_X_L_ADDR),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_X_H_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
-			ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
-			ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };