Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
  sh: remove dead config symbols from SH code
  sh: Kill off broken snapgear ds1302 code.
  sh: Add a dummy vga.h.
  rtc: rtc-sh: Zero out tm value for invalid rtc states.
  rtc: sh-rtc: Handle rtc_device_register() failure properly.
  sh: Fix heartbeart on Solution Engine series
  sh: Remove SCI_NPORTS from sh-sci.h
  sh: Fix up PAGE_KERNEL_PCC() for nommu.
  sh: hs7751rvoip: Kill off dead IPR IRQ mappings.
  sh: hs7751rvoip: irq.c needs linux/interrupt.h.
  sh: Kill off __{copy,clear}_user_page().
  sh: Optimized copy_{to,from}_user_page() for SH-4.
  sh: Wire up clear_user_highpage().
  sh: Kill off the remaining ST40 cruft.
  superhyway: Handle device_register() retval properly.
  sh: kgdb sysrq depends on magic sysrq.
  sh: Add -Werror for clean directories.
  sh: Fix up kgdb build with modular sh-sci.
  sh: Export __{s,u}divsi3_i4i on all CPUs.
  sh: Fix up kgdb-on-NMI branch target.
  ...

arch/sh/Kconfig

@@ -211,10 +211,12 @@ config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
 	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
 	help
-	  Select SolutionEngine if configuring for a Hitachi SH7709
-	  or SH7750 evaluation board.
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 
 config SH_7206_SOLUTION_ENGINE
 	bool "SolutionEngine7206"
@@ -603,7 +605,7 @@ config BOOT_LINK_OFFSET
 
 config UBC_WAKEUP
 	bool "Wakeup UBC on startup"
-	depends on CPU_SH4
+	depends on CPU_SH4 && !CPU_SH4A
 	help
 	  Selecting this option will wakeup the User Break Controller (UBC) on
 	  startup. Although the UBC is left in an awake state when the processor

arch/sh/Kconfig.debug

@@ -124,12 +124,13 @@ config KGDB_NMI
 
 config SH_KGDB_CONSOLE
 	bool "Console messages through GDB"
-	depends on !SERIAL_SH_SCI_CONSOLE
+	depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 	default n
 
 config KGDB_SYSRQ
 	bool "Allow SysRq 'G' to enter KGDB"
+	depends on MAGIC_SYSRQ
 	default y
 
 comment "Serial port setup"

arch/sh/boards/renesas/hs7751rvoip/irq.c

@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hs7751rvoip.h>

arch/sh/boards/renesas/hs7751rvoip/setup.c

@@ -15,20 +15,6 @@
 #include <asm/io.h>
 #include <asm/machvec.h>
 
-static struct ipr_data hs77501rvoip_ipr_map[] = {
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-	{ DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-#endif
-};
-
-static void __init hs7751rvoip_init_irq(void)
-{
-	make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map));
-
-	init_hs7751rvoip_IRQ();
-}
-
 static void hs7751rvoip_power_off(void)
 {
 	ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
@@ -75,14 +61,13 @@ static int __init hs7751rvoip_cf_init(void)
 
 	return 0;
 }
+device_initcall(hs7751rvoip_cf_init);
 
 /*
  * Initialize the board
  */
 static void __init hs7751rvoip_setup(char **cmdline_p)
 {
-	device_initcall(hs7751rvoip_cf_init);
-
 	ctrl_outb(0xf0, PA_OUTPORTR);
 	pm_power_off = hs7751rvoip_power_off;
 
@@ -115,6 +100,6 @@ static struct sh_machine_vector mv_hs7751rvoip __initmv = {
 	.mv_outsw		= hs7751rvoip_outsw,
 	.mv_outsl		= hs7751rvoip_outsl,
 
-	.mv_init_irq		= hs7751rvoip_init_irq,
+	.mv_init_irq		= init_hs7751rvoip_IRQ,
 	.mv_ioport_map		= hs7751rvoip_ioport_map,
 };

arch/sh/boards/renesas/sh7710voipgw/setup.c

@@ -11,7 +11,6 @@
 #include <asm/machvec.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 
 static struct ipr_data sh7710voipgw_ipr_map[] = {
 	{ TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },

arch/sh/boards/se/7206/irq.c

@@ -9,7 +9,6 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <asm/se7206.h>
 

arch/sh/boards/se/770x/setup.c

@@ -94,6 +94,7 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
 };
 
 static struct resource heartbeat_resources[] = {

arch/sh/boards/se/7722/setup.c

@@ -16,8 +16,13 @@
 #include <asm/machvec.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
+#include <asm/heartbeat.h>
 
 /* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start  = PA_LED,
@@ -29,6 +34,9 @@ static struct resource heartbeat_resources[] = {
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources  = ARRAY_SIZE(heartbeat_resources),
 	.resource       = heartbeat_resources,
 };

arch/sh/boards/se/7780/setup.c

@@ -14,8 +14,13 @@
 #include <asm/machvec.h>
 #include <asm/se7780.h>
 #include <asm/io.h>
+#include <asm/heartbeat.h>
 
 /* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start  = PA_LED,
@@ -27,6 +32,9 @@ static struct resource heartbeat_resources[] = {
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources  = ARRAY_SIZE(heartbeat_resources),
 	.resource       = heartbeat_resources,
 };

arch/sh/boards/snapgear/Makefile

@@ -2,5 +2,4 @@
 # Makefile for the SnapGear specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o rtc.o
-
+obj-y	 := setup.o io.o