i2c: mchp-pci1xxxx: Update Timing registers

Update I2C timing registers based on latest hardware design.
This fix does not break functionality of chips with older design and
existing users will not be affected.

Fixes: 3616936 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-mchp-pci1xxxx.c

@@ -48,9 +48,9 @@
  * SR_HOLD_TIME_XK_TICKS field will indicate the number of ticks of the
  * baud clock required to program 'Hold Time' at X KHz.
  */
-#define SR_HOLD_TIME_100K_TICKS	133
-#define SR_HOLD_TIME_400K_TICKS	20
-#define SR_HOLD_TIME_1000K_TICKS	11
+#define SR_HOLD_TIME_100K_TICKS		150
+#define SR_HOLD_TIME_400K_TICKS		20
+#define SR_HOLD_TIME_1000K_TICKS	12
 
 #define SMB_CORE_COMPLETION_REG_OFF3	(SMBUS_MAST_CORE_ADDR_BASE + 0x23)
 
@@ -65,17 +65,17 @@
  * the baud clock required to program 'fair idle delay' at X KHz. Fair idle
  * delay establishes the MCTP T(IDLE_DELAY) period.
  */
-#define FAIR_BUS_IDLE_MIN_100K_TICKS		969
-#define FAIR_BUS_IDLE_MIN_400K_TICKS		157
-#define FAIR_BUS_IDLE_MIN_1000K_TICKS		157
+#define FAIR_BUS_IDLE_MIN_100K_TICKS		992
+#define FAIR_BUS_IDLE_MIN_400K_TICKS		500
+#define FAIR_BUS_IDLE_MIN_1000K_TICKS		500
 
 /*
  * FAIR_IDLE_DELAY_XK_TICKS field will indicate the number of ticks of the
  * baud clock required to satisfy the fairness protocol at X KHz.
  */
-#define FAIR_IDLE_DELAY_100K_TICKS	1000
-#define FAIR_IDLE_DELAY_400K_TICKS	500
-#define FAIR_IDLE_DELAY_1000K_TICKS	500
+#define FAIR_IDLE_DELAY_100K_TICKS	963
+#define FAIR_IDLE_DELAY_400K_TICKS	156
+#define FAIR_IDLE_DELAY_1000K_TICKS	156
 
 #define SMB_IDLE_SCALING_100K		\
 	((FAIR_IDLE_DELAY_100K_TICKS << 16) | FAIR_BUS_IDLE_MIN_100K_TICKS)
@@ -105,7 +105,7 @@
  */
 #define BUS_CLK_100K_LOW_PERIOD_TICKS		156
 #define BUS_CLK_400K_LOW_PERIOD_TICKS		41
-#define BUS_CLK_1000K_LOW_PERIOD_TICKS	15
+#define BUS_CLK_1000K_LOW_PERIOD_TICKS		15
 
 /*
  * BUS_CLK_XK_HIGH_PERIOD_TICKS field defines the number of I2C Baud Clock
@@ -131,7 +131,7 @@
  */
 #define CLK_SYNC_100K			4
 #define CLK_SYNC_400K			4
-#define CLK_SYNC_1000K		4
+#define CLK_SYNC_1000K			4
 
 #define SMB_CORE_DATA_TIMING_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x40)
 
@@ -142,25 +142,25 @@
  * determines the SCLK hold time following SDAT driven low during the first
  * START bit in a transfer.
  */
-#define FIRST_START_HOLD_100K_TICKS	22
-#define FIRST_START_HOLD_400K_TICKS	16
-#define FIRST_START_HOLD_1000K_TICKS	6
+#define FIRST_START_HOLD_100K_TICKS	23
+#define FIRST_START_HOLD_400K_TICKS	8
+#define FIRST_START_HOLD_1000K_TICKS	12
 
 /*
  * STOP_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
  * required to program 'STOP_SETUP' timer at X KHz. This timer determines the
  * SDAT setup time from the rising edge of SCLK for a STOP condition.
  */
-#define STOP_SETUP_100K_TICKS		157
+#define STOP_SETUP_100K_TICKS		150
 #define STOP_SETUP_400K_TICKS		20
-#define STOP_SETUP_1000K_TICKS	12
+#define STOP_SETUP_1000K_TICKS		12
 
 /*
  * RESTART_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
  * required to program 'RESTART_SETUP' timer at X KHz. This timer determines the
  * SDAT setup time from the rising edge of SCLK for a repeated START condition.
  */
-#define RESTART_SETUP_100K_TICKS	157
+#define RESTART_SETUP_100K_TICKS	156
 #define RESTART_SETUP_400K_TICKS	20
 #define RESTART_SETUP_1000K_TICKS	12
 
@@ -169,7 +169,7 @@
  * required to program 'DATA_HOLD' timer at X KHz. This timer determines the
  * SDAT hold time following SCLK driven low.
  */
-#define DATA_HOLD_100K_TICKS		2
+#define DATA_HOLD_100K_TICKS		12
 #define DATA_HOLD_400K_TICKS		2
 #define DATA_HOLD_1000K_TICKS		2
 
@@ -190,35 +190,35 @@
  * Bus Idle Minimum time = BUS_IDLE_MIN[7:0] x Baud_Clock_Period x
  * (BUS_IDLE_MIN_XK_TICKS[7] ? 4,1)
  */
-#define BUS_IDLE_MIN_100K_TICKS		167UL
-#define BUS_IDLE_MIN_400K_TICKS		139UL
-#define BUS_IDLE_MIN_1000K_TICKS		133UL
+#define BUS_IDLE_MIN_100K_TICKS		36UL
+#define BUS_IDLE_MIN_400K_TICKS		10UL
+#define BUS_IDLE_MIN_1000K_TICKS	4UL
 
 /*
  * CTRL_CUM_TIME_OUT_XK_TICKS defines SMBus Controller Cumulative Time-Out.
  * SMBus Controller Cumulative Time-Out duration =
  * CTRL_CUM_TIME_OUT_XK_TICKS[7:0] x Baud_Clock_Period x 2048
  */
-#define CTRL_CUM_TIME_OUT_100K_TICKS		159
-#define CTRL_CUM_TIME_OUT_400K_TICKS		159
-#define CTRL_CUM_TIME_OUT_1000K_TICKS		159
+#define CTRL_CUM_TIME_OUT_100K_TICKS		76
+#define CTRL_CUM_TIME_OUT_400K_TICKS		76
+#define CTRL_CUM_TIME_OUT_1000K_TICKS		76
 
 /*
  * TARGET_CUM_TIME_OUT_XK_TICKS defines SMBus Target Cumulative Time-Out duration.
  * SMBus Target Cumulative Time-Out duration = TARGET_CUM_TIME_OUT_XK_TICKS[7:0] x
  * Baud_Clock_Period x 4096
  */
-#define TARGET_CUM_TIME_OUT_100K_TICKS	199
-#define TARGET_CUM_TIME_OUT_400K_TICKS	199
-#define TARGET_CUM_TIME_OUT_1000K_TICKS	199
+#define TARGET_CUM_TIME_OUT_100K_TICKS	95
+#define TARGET_CUM_TIME_OUT_400K_TICKS	95
+#define TARGET_CUM_TIME_OUT_1000K_TICKS	95
 
 /*
  * CLOCK_HIGH_TIME_OUT_XK defines Clock High time out period.
  * Clock High time out period = CLOCK_HIGH_TIME_OUT_XK[7:0] x Baud_Clock_Period x 8
  */
-#define CLOCK_HIGH_TIME_OUT_100K_TICKS	204
-#define CLOCK_HIGH_TIME_OUT_400K_TICKS	204
-#define CLOCK_HIGH_TIME_OUT_1000K_TICKS	204
+#define CLOCK_HIGH_TIME_OUT_100K_TICKS	97
+#define CLOCK_HIGH_TIME_OUT_400K_TICKS	97
+#define CLOCK_HIGH_TIME_OUT_1000K_TICKS	97
 
 #define TO_SCALING_100K		\
 	((BUS_IDLE_MIN_100K_TICKS << 24) | (CTRL_CUM_TIME_OUT_100K_TICKS << 16) | \