Merge branch 'next-i2c-mpc-v8' into next-i2c

Documentation/powerpc/dts-bindings/fsl/i2c.txt

@@ -2,15 +2,14 @@
 
 Required properties :
 
- - device_type : Should be "i2c"
  - reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+   mpc5200 or mpc5200b. For the mpc5121, an additional node
+   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
 
 Recommended properties :
 
- - compatible : compatibility list with 2 entries, the first should
-   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
-   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
-   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -24,25 +23,40 @@ Recommended properties :
 
 Examples :
 
+	/* MPC5121 based board */
+	i2c@1740 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+		reg = <0x1740 0x20>;
+		interrupts = <11 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <100000>;
+	};
+
+	i2ccontrol@1760 {
+		compatible = "fsl,mpc5121-i2c-ctrl";
+		reg = <0x1760 0x8>;
+	};
+
+	/* MPC5200B based board */
 	i2c@3d00 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-		cell-index = <0>;
 		reg = <0x3d00 0x40>;
 		interrupts = <2 15 0>;
 		interrupt-parent = <&mpc5200_pic>;
 		fsl,preserve-clocking;
 	};
 
+	/* MPC8544 base board */
 	i2c@3100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cell-index = <1>;
 		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
 		reg = <0x3100 0x100>;
 		interrupts = <43 2>;
 		interrupt-parent = <&mpic>;
 		clock-frequency = <400000>;
 	};
-

drivers/i2c/busses/Kconfig

@@ -419,13 +419,12 @@ config I2C_IXP2000
 	  instead.
 
 config I2C_MPC
-	tristate "MPC107/824x/85xx/52xx/86xx"
+	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC32
 	help
 	  If you say yes to this option, support will be included for the
-	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-	  MPC85xx/MPC8641 family processors. The driver may also work on 52xx
-	  family processors, though interrupts are known not to work.
+	  built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+	  MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mpc.