Merge branch 'qed-fixes'

Yuval Mintz says:

====================
qed*: Fixes series

This series contains several small fixes to driver behavior
[4th patch is the only one containing a 'fatal' fix, but the error
is only theoretical for qede; if would require another protocol
driver yet unsubmitted to reach it].
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_hsi.h

@@ -3700,6 +3700,7 @@ struct public_port {
 #define MEDIA_DA_TWINAX         0x3
 #define MEDIA_BASE_T            0x4
 #define MEDIA_SFP_1G_FIBER      0x5
+#define MEDIA_MODULE_FIBER      0x6
 #define MEDIA_KR                0xf0
 #define MEDIA_NOT_PRESENT       0xff
 

drivers/net/ethernet/qlogic/qed/qed_l2.c

@@ -72,6 +72,7 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
 	p_ramrod->mtu			= cpu_to_le16(p_params->mtu);
 	p_ramrod->inner_vlan_removal_en	= p_params->remove_inner_vlan;
 	p_ramrod->drop_ttl0_en		= p_params->drop_ttl0;
+	p_ramrod->untagged		= p_params->only_untagged;
 
 	SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_UCAST_DROP_ALL, 1);
 	SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_MCAST_DROP_ALL, 1);
@@ -247,10 +248,6 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn,
 		SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_DROP_ALL,
 			  !!(accept_filter & QED_ACCEPT_NONE));
 
-		SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL,
-			  (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) &&
-			   !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED)));
-
 		SET_FIELD(state, ETH_VPORT_TX_MODE_MCAST_DROP_ALL,
 			  !!(accept_filter & QED_ACCEPT_NONE));
 
@@ -1748,7 +1745,8 @@ static int qed_start_vport(struct qed_dev *cdev,
 			   start.vport_id, start.mtu);
 	}
 
-	qed_reset_vport_stats(cdev);
+	if (params->clear_stats)
+		qed_reset_vport_stats(cdev);
 
 	return 0;
 }

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -1085,6 +1085,7 @@ static int qed_get_port_type(u32 media_type)
 	case MEDIA_SFPP_10G_FIBER:
 	case MEDIA_SFP_1G_FIBER:
 	case MEDIA_XFP_FIBER:
+	case MEDIA_MODULE_FIBER:
 	case MEDIA_KR:
 		port_type = PORT_FIBRE;
 		break;

drivers/net/ethernet/qlogic/qed/qed_spq.c

@@ -614,7 +614,9 @@ qed_spq_add_entry(struct qed_hwfn *p_hwfn,
 
 			*p_en2 = *p_ent;
 
-			kfree(p_ent);
+			/* EBLOCK responsible to free the allocated p_ent */
+			if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK)
+				kfree(p_ent);
 
 			p_ent = p_en2;
 		}
@@ -749,6 +751,15 @@ int qed_spq_post(struct qed_hwfn *p_hwfn,
 		 * Thus, after gaining the answer perform the cleanup here.
 		 */
 		rc = qed_spq_block(p_hwfn, p_ent, fw_return_code);
+
+		if (p_ent->queue == &p_spq->unlimited_pending) {
+			/* This is an allocated p_ent which does not need to
+			 * return to pool.
+			 */
+			kfree(p_ent);
+			return rc;
+		}
+
 		if (rc)
 			goto spq_post_fail2;
 
@@ -844,8 +855,12 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 		found->comp_cb.function(p_hwfn, found->comp_cb.cookie, p_data,
 					fw_return_code);
 
-	if (found->comp_mode != QED_SPQ_MODE_EBLOCK)
-		/* EBLOCK is responsible for freeing its own entry */
+	if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) ||
+	    (found->queue == &p_spq->unlimited_pending))
+		/* EBLOCK  is responsible for returning its own entry into the
+		 * free list, unless it originally added the entry into the
+		 * unlimited pending list.
+		 */
 		qed_spq_return_entry(p_hwfn, found);
 
 	/* Attempt to post pending requests */

drivers/net/ethernet/qlogic/qede/qede_main.c

@@ -3231,7 +3231,7 @@ static int qede_stop_queues(struct qede_dev *edev)
 	return rc;
 }
 
-static int qede_start_queues(struct qede_dev *edev)
+static int qede_start_queues(struct qede_dev *edev, bool clear_stats)
 {
 	int rc, tc, i;
 	int vlan_removal_en = 1;
@@ -3462,6 +3462,7 @@ static void qede_unload(struct qede_dev *edev, enum qede_unload_mode mode)
 
 enum qede_load_mode {
 	QEDE_LOAD_NORMAL,
+	QEDE_LOAD_RELOAD,
 };
 
 static int qede_load(struct qede_dev *edev, enum qede_load_mode mode)
@@ -3500,7 +3501,7 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode)
 		goto err3;
 	DP_INFO(edev, "Setup IRQs succeeded\n");
 
-	rc = qede_start_queues(edev);
+	rc = qede_start_queues(edev, mode != QEDE_LOAD_RELOAD);
 	if (rc)
 		goto err4;
 	DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n");
@@ -3555,7 +3556,7 @@ void qede_reload(struct qede_dev *edev,
 	if (func)
 		func(edev, args);
 
-	qede_load(edev, QEDE_LOAD_NORMAL);
+	qede_load(edev, QEDE_LOAD_RELOAD);
 
 	mutex_lock(&edev->qede_lock);
 	qede_config_rx_mode(edev->ndev);

include/linux/qed/qed_eth_if.h

@@ -49,6 +49,7 @@ struct qed_start_vport_params {
 	bool drop_ttl0;
 	u8 vport_id;
 	u16 mtu;
+	bool clear_stats;
 };
 
 struct qed_stop_rxq_params {