mtd: nand: sunxi: add reset line support

The NAND controller on some sun8i chips needs its reset line to be
deasserted before they can enter working state.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drivers/mtd/nand/sunxi_nand.c

@@ -39,6 +39,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
+#include <linux/reset.h>
 
 #define NFC_REG_CTL		0x0000
 #define NFC_REG_ST		0x0004
@@ -270,6 +271,7 @@ struct sunxi_nfc {
 	void __iomem *regs;
 	struct clk *ahb_clk;
 	struct clk *mod_clk;
+	struct reset_control *reset;
 	unsigned long assigned_cs;
 	unsigned long clk_rate;
 	struct list_head chips;
@@ -2209,15 +2211,27 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_ahb_clk_unprepare;
 
+	nfc->reset = devm_reset_control_get_optional(dev, "ahb");
+	if (!IS_ERR(nfc->reset)) {
+		ret = reset_control_deassert(nfc->reset);
+		if (ret) {
+			dev_err(dev, "reset err %d\n", ret);
+			goto out_mod_clk_unprepare;
+		}
+	} else if (PTR_ERR(nfc->reset) != -ENOENT) {
+		ret = PTR_ERR(nfc->reset);
+		goto out_mod_clk_unprepare;
+	}
+
 	ret = sunxi_nfc_rst(nfc);
 	if (ret)
-		goto out_mod_clk_unprepare;
+		goto out_ahb_reset_reassert;
 
 	writel(0, nfc->regs + NFC_REG_INT);
 	ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt,
 			       0, "sunxi-nand", nfc);
 	if (ret)
-		goto out_mod_clk_unprepare;
+		goto out_ahb_reset_reassert;
 
 	nfc->dmac = dma_request_slave_channel(dev, "rxtx");
 	if (nfc->dmac) {
@@ -2247,6 +2261,9 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 out_release_dmac:
 	if (nfc->dmac)
 		dma_release_channel(nfc->dmac);
+out_ahb_reset_reassert:
+	if (!IS_ERR(nfc->reset))
+		reset_control_assert(nfc->reset);
 out_mod_clk_unprepare:
 	clk_disable_unprepare(nfc->mod_clk);
 out_ahb_clk_unprepare:
@@ -2260,6 +2277,10 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
 	struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
 
 	sunxi_nand_chips_cleanup(nfc);
+
+	if (!IS_ERR(nfc->reset))
+		reset_control_assert(nfc->reset);
+
 	if (nfc->dmac)
 		dma_release_channel(nfc->dmac);
 	clk_disable_unprepare(nfc->mod_clk);