Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/tip/tip

Pull interrupt subsystem updates from Thomas Gleixner:
 "Core:

   - Provide a new mechanism to create interrupt domains. The existing
     interfaces have already too many parameters and it's a pain to
     expand any of this for new required functionality.

     The new function takes a pointer to a data structure as argument.
     The data structure combines all existing parameters and allows for
     easy extension.

     The first extension for this is to handle the instantiation of
     generic interrupt chips at the core level and to allow drivers to
     provide extra init/exit callbacks.

     This is necessary to do the full interrupt chip initialization
     before the new domain is published, so that concurrent usage sites
     won't see a half initialized interrupt domain. Similar problems
     exist on teardown.

     This has turned out to be a real problem due to the deferred and
     parallel probing which was added in recent years.

     Handling this at the core level allows to remove quite some accrued
     boilerplate code in existing drivers and avoids horrible
     workarounds at the driver level.

   - The usual small improvements all over the place

  Drivers:

   - Add support for LAN966x OIC and RZ/Five SoC

   - Split the STM ExtI driver into a microcontroller and a SMP version
     to allow building the latter as a module for multi-platform
     kernels

   - Enable MSI support for Armada 370XP on platforms which do not
     support IPIs

   - The usual small fixes and enhancements all over the place"

* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  irqdomain: Fix the kernel-doc and plug it into Documentation
  genirq: Set IRQF_COND_ONESHOT in request_irq()
  irqchip/imx-irqsteer: Handle runtime power management correctly
  irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
  irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
  irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
  irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
  irqchip/gic-v4: Always configure affinity on VPE activation
  Revert "irqchip/dw-apb-ictl: Support building as module"
  Revert "Loongarch: Support loongarch avec"
  arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
  ARM: stm32: Allow build irq-stm32mp-exti driver as module
  irqchip/stm32mp-exti: Allow building as module
  irqchip/stm32mp-exti: Rename internal symbols
  irqchip/stm32-exti: Split MCU and MPU code
  arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
  ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
  irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
  irqchip/dw-apb-ictl: Support building as module
  irqchip/riscv-aplic: Simplify the initialization code
  ...

Documentation/core-api/genericirq.rst

@@ -410,6 +410,8 @@ which are used in the generic IRQ layer.
 .. kernel-doc:: include/linux/interrupt.h
    :internal:
 
+.. kernel-doc:: include/linux/irqdomain.h
+
 Public Functions Provided
 =========================
 

Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,lan966x-oic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x outband interrupt controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  The Microchip LAN966x outband interrupt controller (OIC) maps the internal
+  interrupt sources of the LAN966x device to an external interrupt.
+  When the LAN966x device is used as a PCI device, the external interrupt is
+  routed to the PCI interrupt.
+
+properties:
+  compatible:
+    const: microchip,lan966x-oic
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e00c0120 {
+        compatible = "microchip,lan966x-oic";
+        reg = <0xe00c0120 0x190>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        interrupts = <0>;
+        interrupt-parent = <&intc>;
+    };
+...

Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml

@@ -21,13 +21,16 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g043u-irqc   # RZ/G2UL
-          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
-          - renesas,r9a07g054-irqc    # RZ/V2L
-          - renesas,r9a08g045-irqc    # RZ/G3S
-      - const: renesas,rzg2l-irqc
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043u-irqc    # RZ/G2UL
+              - renesas,r9a07g044-irqc     # RZ/G2{L,LC}
+              - renesas,r9a07g054-irqc     # RZ/V2L
+              - renesas,r9a08g045-irqc     # RZ/G3S
+          - const: renesas,rzg2l-irqc
+
+      - const: renesas,r9a07g043f-irqc     # RZ/Five
 
   '#interrupt-cells':
     description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the

MAINTAINERS

@@ -14942,6 +14942,12 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/microchip/lan966x/*
 
+MICROCHIP LAN966X OIC DRIVER
+M:	Herve Codina <herve.codina@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml
+F:	drivers/irqchip/irq-lan966x-oic.c
+
 MICROCHIP LCDFB DRIVER
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-fbdev@vger.kernel.org

arch/arm/mach-stm32/Kconfig

@@ -11,7 +11,7 @@ menuconfig ARCH_STM32
 	select CLKSRC_STM32
 	select PINCTRL
 	select RESET_CONTROLLER
-	select STM32_EXTI
+	select STM32_EXTI if ARM_SINGLE_ARMV7M
 	select STM32_FIREWALL
 	help
 	  Support for STMicroelectronics STM32 processors.

arch/arm64/Kconfig.platforms

@@ -309,7 +309,6 @@ config ARCH_STM32
 	select GPIOLIB
 	select PINCTRL
 	select PINCTRL_STM32MP257
-	select STM32_EXTI
 	select ARM_SMC_MBOX
 	select ARM_SCMI_PROTOCOL
 	select REGULATOR

arch/um/drivers/virt-pci.c

@@ -988,6 +988,11 @@ static struct resource virt_platform_resource = {
 
 static int __init um_pci_init(void)
 {
+	struct irq_domain_info inner_domain_info = {
+		.size		= MAX_MSI_VECTORS,
+		.hwirq_max	= MAX_MSI_VECTORS,
+		.ops		= &um_pci_inner_domain_ops,
+	};
 	int err, i;
 
 	WARN_ON(logic_iomem_add_region(&virt_cfgspace_resource,
@@ -1017,11 +1022,10 @@ static int __init um_pci_init(void)
 		goto free;
 	}
 
-	um_pci_inner_domain = __irq_domain_add(um_pci_fwnode, MAX_MSI_VECTORS,
-					       MAX_MSI_VECTORS, 0,
-					       &um_pci_inner_domain_ops, NULL);
-	if (!um_pci_inner_domain) {
-		err = -ENOMEM;
+	inner_domain_info.fwnode = um_pci_fwnode;
+	um_pci_inner_domain = irq_domain_instantiate(&inner_domain_info);
+	if (IS_ERR(um_pci_inner_domain)) {
+		err = PTR_ERR(um_pci_inner_domain);
 		goto free;
 	}
 
@@ -1058,7 +1062,7 @@ static int __init um_pci_init(void)
 		goto free;
 	return 0;
 free:
-	if (um_pci_inner_domain)
+	if (!IS_ERR_OR_NULL(um_pci_inner_domain))
 		irq_domain_remove(um_pci_inner_domain);
 	if (um_pci_fwnode)
 		irq_domain_free_fwnode(um_pci_fwnode);

drivers/acpi/processor_core.c

@@ -216,6 +216,21 @@ phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id)
 	return rv;
 }
 
+int __init acpi_get_madt_revision(void)
+{
+	struct acpi_table_header *madt = NULL;
+	int revision;
+
+	if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0, &madt)))
+		return -EINVAL;
+
+	revision = madt->revision;
+
+	acpi_put_table(madt);
+
+	return revision;
+}
+
 static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };

drivers/irqchip/Kconfig

@@ -169,6 +169,18 @@ config IXP4XX_IRQ
 	select IRQ_DOMAIN
 	select SPARSE_IRQ
 
+config LAN966X_OIC
+	tristate "Microchip LAN966x OIC Support"
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	help
+	  Enable support for the LAN966x Outbound Interrupt Controller.
+	  This controller is present on the Microchip LAN966x PCI device and
+	  maps the internal interrupts sources to PCIe interrupt.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called irq-lan966x-oic.
+
 config MADERA_IRQ
 	tristate
 
@@ -392,6 +404,15 @@ config LS_SCFG_MSI
 config PARTITION_PERCPU
 	bool
 
+config STM32MP_EXTI
+	tristate "STM32MP extended interrupts and event controller"
+	depends on (ARCH_STM32 && !ARM_SINGLE_ARMV7M) || COMPILE_TEST
+	default y
+	select IRQ_DOMAIN_HIERARCHY
+	select GENERIC_IRQ_CHIP
+	help
+	  Support STM32MP EXTI (extended interrupts and event) controller.
+
 config STM32_EXTI
 	bool
 	select IRQ_DOMAIN

drivers/irqchip/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
 obj-$(CONFIG_LS_EXTIRQ)			+= irq-ls-extirq.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
+obj-$(CONFIG_STM32MP_EXTI)		+= irq-stm32mp-exti.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
 obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
@@ -104,6 +105,7 @@ obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
 obj-$(CONFIG_IMX_MU_MSI)		+= irq-imx-mu-msi.o
 obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
+obj-$(CONFIG_LAN966X_OIC)		+= irq-lan966x-oic.o
 obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
 obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o
 obj-$(CONFIG_TI_SCI_INTA_IRQCHIP)	+= irq-ti-sci-inta.o