MIPS: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

remove_irq() has been replaced by free_irq() as well.

There were build error's during previous version, couple of which was
reported by kbuild test robot <lkp@intel.com> of which one was reported
by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a
few more issues including build errors, those also have been fixed.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/alchemy/common/time.c

@@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.cpumask	= cpu_possible_mask,
 };
 
-static struct irqaction au1x_rtcmatch2_irqaction = {
-	.handler	= au1x_rtcmatch2_irq,
-	.flags		= IRQF_TIMER,
-	.name		= "timer",
-	.dev_id		= &au1x_rtcmatch2_clockdev,
-};
-
 static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
@@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->min_delta_ns = clockevent_delta2ns(9, cd);
 	cd->min_delta_ticks = 9;	/* ~0.28ms */
 	clockevents_register_device(cd);
-	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
+	if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+			&au1x_rtcmatch2_clockdev))
+		pr_err("Failed to register timer interrupt\n");
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 

arch/mips/ar7/irq.c

@@ -83,12 +83,6 @@ static struct irq_chip ar7_sec_irq_type = {
 	.irq_ack = ar7_ack_sec_irq,
 };
 
-static struct irqaction ar7_cascade_action = {
-	.handler = no_action,
-	.name = "AR7 cascade interrupt",
-	.flags = IRQF_NO_THREAD,
-};
-
 static void __init ar7_irq_init(int base)
 {
 	int i;
@@ -116,8 +110,14 @@ static void __init ar7_irq_init(int base)
 						 handle_level_irq);
 	}
 
-	setup_irq(2, &ar7_cascade_action);
-	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	if (request_irq(2, no_action, IRQF_NO_THREAD, "AR7 cascade interrupt",
+			NULL))
+		pr_err("Failed to request irq 2 (AR7 cascade interrupt)\n");
+	if (request_irq(ar7_irq_base, no_action, IRQF_NO_THREAD,
+			"AR7 cascade interrupt", NULL)) {
+		pr_err("Failed to request irq %d (AR7 cascade interrupt)\n",
+		       ar7_irq_base);
+	}
 	set_c0_status(IE_IRQ0);
 }
 

arch/mips/ath25/ar2315.c

@@ -64,11 +64,6 @@ static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ar2315_ahb_err_interrupt  = {
-	.handler	= ar2315_ahb_err_handler,
-	.name		= "ar2315-ahb-error",
-};
-
 static void ar2315_misc_irq_handler(struct irq_desc *desc)
 {
 	u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
@@ -159,7 +154,9 @@ void __init ar2315_arch_init_irq(void)
 		panic("Failed to add IRQ domain");
 
 	irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
-	setup_irq(irq, &ar2315_ahb_err_interrupt);
+	if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
+			NULL))
+		pr_err("Failed to register ar2315-ahb-error interrupt\n");
 
 	irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
 					 ar2315_misc_irq_handler, domain);

arch/mips/ath25/ar5312.c

@@ -68,11 +68,6 @@ static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ar5312_ahb_err_interrupt  = {
-	.handler = ar5312_ahb_err_handler,
-	.name    = "ar5312-ahb-error",
-};
-
 static void ar5312_misc_irq_handler(struct irq_desc *desc)
 {
 	u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
@@ -154,7 +149,9 @@ void __init ar5312_arch_init_irq(void)
 		panic("Failed to add IRQ domain");
 
 	irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
-	setup_irq(irq, &ar5312_ahb_err_interrupt);
+	if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
+			NULL))
+		pr_err("Failed to register ar5312-ahb-error interrupt\n");
 
 	irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
 					 ar5312_misc_irq_handler, domain);

arch/mips/bcm63xx/irq.c

@@ -399,26 +399,6 @@ static struct irq_chip bcm63xx_external_irq_chip = {
 	.irq_set_type	= bcm63xx_external_irq_set_type,
 };
 
-static struct irqaction cpu_ip2_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_ip2",
-	.flags		= IRQF_NO_THREAD,
-};
-
-#ifdef CONFIG_SMP
-static struct irqaction cpu_ip3_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_ip3",
-	.flags		= IRQF_NO_THREAD,
-};
-#endif
-
-static struct irqaction cpu_ext_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_extirq",
-	.flags		= IRQF_NO_THREAD,
-};
-
 static void bcm63xx_init_irq(void)
 {
 	int irq_bits;
@@ -531,7 +511,7 @@ static void bcm63xx_init_irq(void)
 
 void __init arch_init_irq(void)
 {
-	int i;
+	int i, irq;
 
 	bcm63xx_init_irq();
 	mips_cpu_irq_init();
@@ -544,14 +524,25 @@ void __init arch_init_irq(void)
 					 handle_edge_irq);
 
 	if (!is_ext_irq_cascaded) {
-		for (i = 3; i < 3 + ext_irq_count; ++i)
-			setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+		for (i = 3; i < 3 + ext_irq_count; ++i) {
+			irq = MIPS_CPU_IRQ_BASE + i;
+			if (request_irq(irq, no_action, IRQF_NO_THREAD,
+					"cascade_extirq", NULL)) {
+				pr_err("Failed to request irq %d (cascade_extirq)\n",
+				       irq);
+			}
+		}
 	}
 
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+	irq = MIPS_CPU_IRQ_BASE + 2;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD,	"cascade_ip2", NULL))
+		pr_err("Failed to request irq %d (cascade_ip2)\n", irq);
 #ifdef CONFIG_SMP
 	if (is_ext_irq_cascaded) {
-		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+		irq = MIPS_CPU_IRQ_BASE + 3;
+		if (request_irq(irq, no_action,	IRQF_NO_THREAD, "cascade_ip3",
+				NULL))
+			pr_err("Failed to request irq %d (cascade_ip3)\n", irq);
 		bcm63xx_internal_irq_chip.irq_set_affinity =
 			bcm63xx_internal_set_affinity;
 

arch/mips/cobalt/irq.c

@@ -45,18 +45,20 @@ asmlinkage void plat_irq_dispatch(void)
 		spurious_interrupt();
 }
 
-static struct irqaction cascade = {
-	.handler	= no_action,
-	.name		= "cascade",
-	.flags		= IRQF_NO_THREAD,
-};
-
 void __init arch_init_irq(void)
 {
 	mips_cpu_irq_init();
 	gt641xx_irq_init();
 	init_i8259_irqs();
 
-	setup_irq(GT641XX_CASCADE_IRQ, &cascade);
-	setup_irq(I8259_CASCADE_IRQ, &cascade);
+	if (request_irq(GT641XX_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+			"cascade", NULL)) {
+		pr_err("Failed to request irq %d (cascade)\n",
+		       GT641XX_CASCADE_IRQ);
+	}
+	if (request_irq(I8259_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+			"cascade", NULL)) {
+		pr_err("Failed to request irq %d (cascade)\n",
+		       I8259_CASCADE_IRQ);
+	}
 }

arch/mips/dec/setup.c

@@ -103,28 +103,8 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
 int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
 int *fpu_kstat_irq;
 
-static struct irqaction ioirq = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-static struct irqaction fpuirq = {
-	.handler = no_action,
-	.name = "fpu",
-	.flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction busirq = {
-	.name = "bus error",
-	.flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction haltirq = {
-	.handler = dec_intr_halt,
-	.name = "halt",
-	.flags = IRQF_NO_THREAD,
-};
-
+static irq_handler_t busirq_handler;
+static unsigned int busirq_flags = IRQF_NO_THREAD;
 
 /*
  * Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
@@ -134,21 +114,21 @@ static void __init dec_be_init(void)
 	switch (mips_machtype) {
 	case MACH_DS23100:	/* DS2100/DS3100 Pmin/Pmax */
 		board_be_handler = dec_kn01_be_handler;
-		busirq.handler = dec_kn01_be_interrupt;
-		busirq.flags |= IRQF_SHARED;
+		busirq_handler = dec_kn01_be_interrupt;
+		busirq_flags |= IRQF_SHARED;
 		dec_kn01_be_init();
 		break;
 	case MACH_DS5000_1XX:	/* DS5000/1xx 3min */
 	case MACH_DS5000_XX:	/* DS5000/xx Maxine */
 		board_be_handler = dec_kn02xa_be_handler;
-		busirq.handler = dec_kn02xa_be_interrupt;
+		busirq_handler = dec_kn02xa_be_interrupt;
 		dec_kn02xa_be_init();
 		break;
 	case MACH_DS5000_200:	/* DS5000/200 3max */
 	case MACH_DS5000_2X0:	/* DS5000/240 3max+ */
 	case MACH_DS5900:	/* DS5900 bigmax */
 		board_be_handler = dec_ecc_be_handler;
-		busirq.handler = dec_ecc_be_interrupt;
+		busirq_handler = dec_ecc_be_interrupt;
 		dec_ecc_be_init();
 		break;
 	}
@@ -764,20 +744,29 @@ void __init arch_init_irq(void)
 		int irq_fpu;
 
 		irq_fpu = dec_interrupt[DEC_IRQ_FPU];
-		setup_irq(irq_fpu, &fpuirq);
+		if (request_irq(irq_fpu, no_action, IRQF_NO_THREAD, "fpu",
+				NULL))
+			pr_err("Failed to register fpu interrupt\n");
 		desc_fpu = irq_to_desc(irq_fpu);
 		fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
 	}
-	if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
-		setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
-
+	if (dec_interrupt[DEC_IRQ_CASCADE] >= 0) {
+		if (request_irq(dec_interrupt[DEC_IRQ_CASCADE], no_action,
+				IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("Failed to register cascade interrupt\n");
+	}
 	/* Register the bus error interrupt. */
-	if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
-		setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
-
+	if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
+		if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
+				busirq_flags, "bus error", NULL))
+			pr_err("Failed to register bus error interrupt\n");
+	}
 	/* Register the HALT interrupt. */
-	if (dec_interrupt[DEC_IRQ_HALT] >= 0)
-		setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
+	if (dec_interrupt[DEC_IRQ_HALT] >= 0) {
+		if (request_irq(dec_interrupt[DEC_IRQ_HALT], dec_intr_halt,
+				IRQF_NO_THREAD, "halt", NULL))
+			pr_err("Failed to register halt interrupt\n");
+	}
 }
 
 asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)

arch/mips/emma/markeins/irq.c

@@ -153,14 +153,6 @@ void emma2rh_gpio_irq_init(void)
 					      handle_edge_irq, "edge");
 }
 
-static struct irqaction irq_cascade = {
-	   .handler = no_action,
-	   .flags = IRQF_NO_THREAD,
-	   .name = "cascade",
-	   .dev_id = NULL,
-	   .next = NULL,
-};
-
 /*
  * the first level int-handler will jump here if it is a emma2rh irq
  */
@@ -236,6 +228,7 @@ void emma2rh_irq_dispatch(void)
 void __init arch_init_irq(void)
 {
 	u32 reg;
+	int irq;
 
 	/* by default, interrupts are disabled. */
 	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
@@ -272,9 +265,15 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 
 	/* setup cascade interrupts */
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
+	irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
+	irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
+	irq = MIPS_CPU_IRQ_BASE + 2;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
 }
 
 asmlinkage void plat_irq_dispatch(void)

arch/mips/include/asm/sni.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_SNI_H
 #define __ASM_SNI_H
 
+#include <linux/irqreturn.h>
+
 extern unsigned int sni_brd_type;
 
 #define SNI_BRD_10		   2
@@ -239,6 +241,6 @@ static inline int sni_eisa_root_init(void)
 
 /* common irq stuff */
 extern void (*sni_hwint)(void);
-extern struct irqaction sni_isa_irq;
+extern irqreturn_t sni_isa_irq_handler(int dummy, void *p);
 
 #endif /* __ASM_SNI_H */

arch/mips/jazz/irq.c

@@ -125,24 +125,18 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction r4030_timer_irqaction = {
-	.handler	= r4030_timer_interrupt,
-	.flags		= IRQF_TIMER,
-	.name		= "R4030 timer",
-};
-
 void __init plat_time_init(void)
 {
 	struct clock_event_device *cd = &r4030_clockevent;
-	struct irqaction *action = &r4030_timer_irqaction;
 	unsigned int cpu = smp_processor_id();
 
 	BUG_ON(HZ != 100);
 
 	cd->cpumask		= cpumask_of(cpu);
 	clockevents_register_device(cd);
-	action->dev_id = cd;
-	setup_irq(JAZZ_TIMER_IRQ, action);
+	if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
+			"R4030 timer", cd))
+		pr_err("Failed to register R4030 timer interrupt\n");
 
 	/*
 	 * Set clock to 100Hz.