cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get…

…_boost_ratio_numerator()

The special case in amd_pstate_highest_perf_set() is the value used
for calculating the boost numerator.  Merge this into
amd_get_boost_ratio_numerator() and then use that to calculate boost
ratio.

This allows dropping more special casing of the highest perf value.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

Documentation/admin-guide/pm/amd-pstate.rst

@@ -251,7 +251,8 @@ performance supported in `AMD CPPC Performance Capability <perf_cap_>`_).
 In some ASICs, the highest CPPC performance is not the one in the ``_CPC``
 table, so we need to expose it to sysfs. If boost is not active, but
 still supported, this maximum frequency will be larger than the one in
-``cpuinfo``.
+``cpuinfo``. On systems that support preferred core, the driver will have
+different values for some cores than others.
 This attribute is read-only.
 
 ``amd_pstate_lowest_nonlinear_freq``

arch/x86/kernel/acpi/cppc.c

@@ -9,6 +9,7 @@
 #include <asm/processor.h>
 #include <asm/topology.h>
 
+#define CPPC_HIGHEST_PERF_PERFORMANCE	196
 #define CPPC_HIGHEST_PERF_PREFCORE	166
 
 enum amd_pref_core {
@@ -245,6 +246,21 @@ int amd_get_boost_ratio_numerator(unsigned int cpu, u64 *numerator)
 		*numerator = boost_numerator;
 		return 0;
 	}
+
+	/*
+	 * For AMD CPUs with Family ID 19H and Model ID range 0x70 to 0x7f,
+	 * the highest performance level is set to 196.
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=218759
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_ZEN4)) {
+		switch (boot_cpu_data.x86_model) {
+		case 0x70 ... 0x7f:
+			*numerator = CPPC_HIGHEST_PERF_PERFORMANCE;
+			return 0;
+		default:
+			break;
+		}
+	}
 	*numerator = CPPC_HIGHEST_PERF_PREFCORE;
 
 	return 0;

drivers/cpufreq/amd-pstate.c

@@ -52,8 +52,6 @@
 #define AMD_PSTATE_TRANSITION_LATENCY	20000
 #define AMD_PSTATE_TRANSITION_DELAY	1000
 #define AMD_PSTATE_FAST_CPPC_TRANSITION_DELAY 600
-#define CPPC_HIGHEST_PERF_PERFORMANCE	196
-#define CPPC_HIGHEST_PERF_DEFAULT	166
 
 #define AMD_CPPC_EPP_PERFORMANCE		0x00
 #define AMD_CPPC_EPP_BALANCE_PERFORMANCE	0x80
@@ -372,43 +370,17 @@ static inline int amd_pstate_enable(bool enable)
 	return static_call(amd_pstate_enable)(enable);
 }
 
-static u32 amd_pstate_highest_perf_set(struct amd_cpudata *cpudata)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	/*
-	 * For AMD CPUs with Family ID 19H and Model ID range 0x70 to 0x7f,
-	 * the highest performance level is set to 196.
-	 * https://bugzilla.kernel.org/show_bug.cgi?id=218759
-	 */
-	if (c->x86 == 0x19 && (c->x86_model >= 0x70 && c->x86_model <= 0x7f))
-		return CPPC_HIGHEST_PERF_PERFORMANCE;
-
-	return CPPC_HIGHEST_PERF_DEFAULT;
-}
-
 static int pstate_init_perf(struct amd_cpudata *cpudata)
 {
 	u64 cap1;
-	u32 highest_perf;
 
 	int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
 				     &cap1);
 	if (ret)
 		return ret;
 
-	/* For platforms that do not support the preferred core feature, the
-	 * highest_pef may be configured with 166 or 255, to avoid max frequency
-	 * calculated wrongly. we take the AMD_CPPC_HIGHEST_PERF(cap1) value as
-	 * the default max perf.
-	 */
-	if (cpudata->hw_prefcore)
-		highest_perf = amd_pstate_highest_perf_set(cpudata);
-	else
-		highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
-
-	WRITE_ONCE(cpudata->highest_perf, highest_perf);
-	WRITE_ONCE(cpudata->max_limit_perf, highest_perf);
+	WRITE_ONCE(cpudata->highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
+	WRITE_ONCE(cpudata->max_limit_perf, AMD_CPPC_HIGHEST_PERF(cap1));
 	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1));
@@ -420,19 +392,13 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 static int cppc_init_perf(struct amd_cpudata *cpudata)
 {
 	struct cppc_perf_caps cppc_perf;
-	u32 highest_perf;
 
 	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
 	if (ret)
 		return ret;
 
-	if (cpudata->hw_prefcore)
-		highest_perf = amd_pstate_highest_perf_set(cpudata);
-	else
-		highest_perf = cppc_perf.highest_perf;
-
-	WRITE_ONCE(cpudata->highest_perf, highest_perf);
-	WRITE_ONCE(cpudata->max_limit_perf, highest_perf);
+	WRITE_ONCE(cpudata->highest_perf, cppc_perf.highest_perf);
+	WRITE_ONCE(cpudata->max_limit_perf, cppc_perf.highest_perf);
 	WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf,
 		   cppc_perf.lowest_nonlinear_perf);
@@ -918,8 +884,8 @@ static u32 amd_pstate_get_transition_latency(unsigned int cpu)
 static int amd_pstate_init_freq(struct amd_cpudata *cpudata)
 {
 	int ret;
-	u32 min_freq;
-	u32 highest_perf, max_freq;
+	u32 min_freq, max_freq;
+	u64 numerator;
 	u32 nominal_perf, nominal_freq;
 	u32 lowest_nonlinear_perf, lowest_nonlinear_freq;
 	u32 boost_ratio, lowest_nonlinear_ratio;
@@ -941,8 +907,10 @@ static int amd_pstate_init_freq(struct amd_cpudata *cpudata)
 
 	nominal_perf = READ_ONCE(cpudata->nominal_perf);
 
-	highest_perf = READ_ONCE(cpudata->highest_perf);
-	boost_ratio = div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf);
+	ret = amd_get_boost_ratio_numerator(cpudata->cpu, &numerator);
+	if (ret)
+		return ret;
+	boost_ratio = div_u64(numerator << SCHED_CAPACITY_SHIFT, nominal_perf);
 	max_freq = (nominal_freq * boost_ratio >> SCHED_CAPACITY_SHIFT) * 1000;
 
 	lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);